LSM6DSLTR

{
  "slug": "lsm6dsltr",
  "version": "0.1.0",
  "type": "component",
  "description": "STMicroelectronics Attitude Sensors, LGA-14(2.5x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "sensors",
    "lsm6dsltr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lsm6dsltr.kicad_sym",
    "lsm6dsltr.kicad_mod",
    "lsm6dsltr.glb",
    "lsm6dsltr.step",
    "lsm6dsltr.lbr",
    "docs/hero.png",
    "docs/lsm6dsltr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lsm6dsltr-hero.glb",
    "lsm6dsltr-hero.overlay.json",
    "lsm6dsltr-etched.glb"
  ],
  "component": {
    "mpn": "LSM6DSLTR",
    "manufacturer": "STMicroelectronics",
    "package": "LGA-14(2.5x3)",
    "pin_count": 14,
    "category": "Sensors",
    "subcategory": "Attitude Sensors",
    "datasheet": "https://www.st.com/resource/en/datasheet/lsm6dsltr.pdf",
    "parts": {
      "symbol": "lsm6dsltr.kicad_sym",
      "footprint": "lsm6dsltr.kicad_mod",
      "model_3d": "lsm6dsltr-hero.glb",
      "model_3d_plain": "lsm6dsltr-etched.glb",
      "model_3d_step": "lsm6dsltr-etched.step",
      "model_3d_step_plain": "lsm6dsltr.step",
      "lbr": "lsm6dsltr.lbr"
    },
    "distributor_links": {
      "lcsc": "C126672"
    },
    "distributor_check": {
      "checked_at": "2026-10-22T21:42:27Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SDO/SA0",
        "type": "bidirectional",
        "description": "SPI 4-wire interface serial data output (SDO) and I2C least significant bit of the device address (SA0)."
      },
      {
        "number": "2",
        "name": "SDx",
        "type": "bidirectional",
        "description": "Mode 1: connect to VDDIO or GND; Mode 2: I2C serial data master (MSDA)."
      },
      {
        "number": "3",
        "name": "SCx",
        "type": "bidirectional",
        "description": "Mode 1: connect to VDDIO or GND; Mode 2: I2C serial clock master (MSCL)."
      },
      {
        "number": "4",
        "name": "INT1",
        "type": "output",
        "description": "Programmable interrupt 1."
      },
      {
        "number": "5",
        "name": "VDDIO",
        "type": "power_in",
        "description": "Power supply for I/O pins; a 100 nF filter capacitor is recommended."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "0 V supply."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "0 V supply."
      },
      {
        "number": "8",
        "name": "VDD",
        "type": "power_in",
        "description": "Power supply (analog supply 1.71 V to 3.6 V); a 100 nF filter capacitor is recommended."
      },
      {
        "number": "9",
        "name": "INT2",
        "type": "bidirectional",
        "description": "Programmable interrupt 2 (INT2) / data enable (DEN); in Mode 2 also I2C master external synchronization signal (MDRDY)."
      },
      {
        "number": "10",
        "name": "NC",
        "type": "unconnected",
        "description": "Leave unconnected and soldered to PCB."
      },
      {
        "number": "11",
        "name": "NC",
        "type": "unconnected",
        "description": "Leave unconnected and soldered to PCB."
      },
      {
        "number": "12",
        "name": "CS",
        "type": "input",
        "description": "I2C/SPI mode selection (1: SPI idle mode / I2C communication enabled; 0: SPI communication mode / I2C disabled)."
      },
      {
        "number": "13",
        "name": "SCL",
        "type": "input",
        "description": "I2C serial clock (SCL) / SPI serial port clock (SPC)."
      },
      {
        "number": "14",
        "name": "SDA",
        "type": "bidirectional",
        "description": "I2C serial data (SDA) / SPI serial data input (SDI) / 3-wire interface serial data output (SDO)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin types (e.g. INT1/INT2 direction, VDD note) are inferred from the function descriptions; the data"
        ],
        "pages_sent": 21,
        "cost_usd": 0.2156,
        "at": "2026-10-22T21:42:09"
      },
      "datasheet": {
        "url": "https://www.st.com/resource/en/datasheet/lsm6dsltr.pdf",
        "pages": 115,
        "sha256": "9b8b2844eb4b4e3f",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 14,
        "described": 14,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lsm6dsltr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.5,
          0.78
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "a441fc384db400c96db6affec2f9c22a5d76b0729e0f2fc46c53746be60b76ca",
        "checked": "2026-10-22",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lsm6dsltr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.5,
          0.78
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "e7cb29c213937ca25259cc211b9d9f0be02fd4b40ea727f282df0ad35ae27c33",
        "checked": "2026-10-22",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}