← Commit history

Publish 0.1.2

Ray ·14b7f40c0e · ·parent 415bdb7
4 files changed +434−70
README.md+30−28
@@ -1,28 +1,28 @@ # LSF0102DCTR -**Texas Instruments** · Translators / Level Shifters · DCT (SSOP-8, 3.0 x 3.0 mm, 0.65 mm pitch)+**Texas Instruments** · Translators / Level Shifters · SSOP-8 (TI DCT, SM8) 2.95 x 4 mm, 0.65 pitch -LSF0102DCTR from Texas Instruments, in a DCT (SSOP-8, 3.0 x 3.0 mm, 0.65 mm pitch). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.+LSF0102DCTR from Texas Instruments, in a SSOP-8 (TI DCT, SM8) 2.95 x 4 mm, 0.65 pitch. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.  ## Pinout  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | GND | power_in | Ground reference pin for the device. |-| 2 | Vref_A | power_in | Reference supply for the A-side; it must be the lowest voltage in the system and the datasheet specifies 0.9 V to 5.5 V. |-| 3 | A1 | bidirectional | Auto-bidirectional data port on the low-voltage (A) side, with I/O voltage limited to 0 V to 5.5 V and clamped to Vref_A when driven from the B side. |-| 4 | A2 | bidirectional | Auto-bidirectional data port on the low-voltage (A) side, with I/O voltage limited to 0 V to 5.5 V and clamped to Vref_A when driven from the B side. |-| 5 | B2 | bidirectional | Auto-bidirectional data port on the high-voltage (B) side, with I/O voltage limited to 0 V to 5.5 V; pull-up resistors to VPU are required on the B side. |-| 6 | B1 | bidirectional | Auto-bidirectional data port on the high-voltage (B) side, with I/O voltage limited to 0 V to 5.5 V; pull-up resistors to VPU are required on the B side. |-| 7 | Vref_B | power_in | Reference supply for the B-side and EN bias; it must be at least Vref_A + 0.8 V and no more than 5.5 V, with a 0.1 µF filter capacitor recommended. |-| 8 | EN | input | Enable input that must be tied directly to Vref_B and pulled up through a 200 kΩ bias resistor; driving it LOW places all I/O pins in the high-impedance state. |+| 1 | GND | power_in | Ground reference for the device. |+| 2 | Vref_A | power_in | Reference supply voltage for the A-side, operational from 0.95 V to 5.5 V and required to be the lowest voltage level across all inputs and outputs. |+| 3 | A1 | bidirectional | Auto-bidirectional data port on the low-side (A) channel 1; recommended input/output voltage range is 0 V to 5.5 V. |+| 4 | A2 | bidirectional | Auto-bidirectional data port on the low-side (A) channel 2; recommended input/output voltage range is 0 V to 5.5 V. |+| 5 | B2 | bidirectional | Auto-bidirectional data port on the high-side (B) channel 2; pull-up resistors are always required on the high side. |+| 6 | B1 | bidirectional | Auto-bidirectional data port on the high-side (B) channel 1; pull-up resistors are always required on the high side. |+| 7 | Vref_B | power_in | Reference supply for the B-side that biases the device, operational from 1.8 V to 5.5 V and recommended to be at least Vref_A + 0.8 V; a 0.1 µF filter capacitor is recommended. |+| 8 | EN | input | Enable input that must be tied directly to Vref_B and pulled up to VCCB through a 200 kΩ bias resistor; driving it LOW places all I/O pins in high impedance. |  ## Key specifications  | Parameter | Value | |---|---| | Manufacturer | Texas Instruments |-| Package | DCT (SSOP-8, 3.0 x 3.0 mm, 0.65 mm pitch) |+| Package | SSOP-8 (TI DCT, SM8) 2.95 x 4 mm, 0.65 pitch | | Category | Logic | | Pins | 8 | @@ -34,33 +34,35 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries |---|---|---|---|---|---|---|---| | Input clamp voltage | VIK |  |  | -1.2 | V | II = -18mA, VEN = 0 | 6 | | High-level input current | IIH |  |  | 5 | µA | VI = 5V, VEN = 0 | 6 |-| Quiescent supply current | ICC |  |  | 6 | µA | Vref_B = VEN = 5.5V, Vref_A = 4.5V, IO = 0, VI = VCC or GND | 6 |-| Input capacitance (Vref_A/B/EN) | CI(ref_A/B/EN) |  |  | 11 | pF | VI = 3V or 0 | 6 |-| Input/output capacitance, switch off | Cio(off) |  | 4 | 6 | pF | VO = 3V or 0, VEN = 0 | 6 |-| Input/output capacitance, switch on | Cio(on) |  | 10.5 | 12.5 | pF | VO = 3V or 0, VEN = 3V | 6 |-| On-state resistance | ron |  | 8 |  | Ω | VI = 0, IO = 64mA; Vref_A = 3.3V; Vref_B = VEN = 5V | 6 |-| On-state resistance | ron |  | 9 |  | Ω | VI = 0, IO = 64mA; Vref_A = 1.8V; Vref_B = VEN = 5V | 6 |-| On-state resistance | ron |  | 10 |  | Ω | VI = 0, IO = 64mA; Vref_A = 1.0V; Vref_B = VEN = 5V | 6 |-| On-state resistance | ron |  | 15 |  | Ω | VI = 0, IO = 32mA; Vref_A = 2.5V; Vref_B = VEN = 5V | 6 |-| On-state resistance | ron |  | 18 |  | Ω | VI = 1.0V, IO = 10mA; Vref_A = 1.8V; Vref_B = VEN = 3.3V | 6 |-| On-state resistance | ron |  | 20 |  | Ω | VI = 0V, IO = 10mA; Vref_A = 1.0V; Vref_B = VEN = 3.3V | 6 |-| On-state resistance | ron |  | 30 |  | Ω | VI = 0V, IO = 10mA; Vref_A = 1.0V; Vref_B = VEN = 1.8V | 6 |+| Supply current | ICC |  |  | 6 | µA | Vref_B = VEN = 5.5V, Vref_A = 4.5V, IO = 0, VI = VCC or GND | 6 |+| Input/output capacitance (off) | Cio(off) |  | 4 | 6 | pF | VO = 3V or 0, VEN = 0 | 6 |+| Input/output capacitance (on) | Cio(on) |  | 10.5 | 12.5 | pF | VO = 3V or 0, VEN = 3V | 6 |+| Reference input capacitance | CI(ref_A/B/EN) |  | 11 |  | pF | VI = 3V or 0 | 6 |+| On-state resistance, Vref_A = 3.3V, Vref_B = VEN = 5V | ron |  | 8 |  | Ω | VI = 0, IO = 64mA | 6 |+| On-state resistance, Vref_A = 1.8V, Vref_B = VEN = 5V | ron |  | 9 |  | Ω | VI = 0, IO = 64mA | 6 |+| On-state resistance, Vref_A = 1.0V, Vref_B = VEN = 5V | ron |  | 10 |  | Ω | VI = 0, IO = 64mA | 6 |+| On-state resistance, Vref_A = 1.8V, Vref_B = VEN = 5V | ron |  | 10 |  | Ω | VI = 0, IO = 32mA | 6 |+| On-state resistance, Vref_A = 2.5V, Vref_B = VEN = 5V | ron |  | 15 |  | Ω | VI = 0, IO = 32mA | 6 |+| On-state resistance, Vref_A = 3.3V, Vref_B = VEN = 5V | ron |  | 9 |  | Ω | VI = 1.8V, IO = 15mA | 6 |+| On-state resistance, Vref_A = 1.8V, Vref_B = VEN = 3.3V | ron |  | 18 |  | Ω | VI = 1.0V, IO = 10mA | 6 |+| On-state resistance, Vref_A = 1.0V, Vref_B = VEN = 3.3V | ron |  | 20 |  | Ω | VI = 0V, IO = 10mA | 6 |+| On-state resistance, Vref_A = 1.0V, Vref_B = VEN = 1.8V | ron |  | 30 |  | Ω | VI = 0V, IO = 10mA | 6 | | Input/output voltage | VI/O | 0 |  | 5.5 | V |  | 5 | | Reference voltage | Vref_A/B/EN | 0 |  | 5.5 | V |  | 5 | | Pass transistor current | IPASS |  |  | 64 | mA |  | 5 | | Operating free-air temperature | TA | -40 |  | 125 | °C |  | 5 |-| Reference voltage (A) | Vref_A | 0.9 |  | 5.5 | V | Vref_A is the lowest voltage level across all inputs and outputs | 18 |+| Reference voltage (A) | Vref_A | 0.9 |  | 5.5 | V |  | 18 | | Input voltage | VI | -0.5 |  | 7 | V |  | 5 | | Input/output voltage | VI/O | -0.5 |  | 7 | V |  | 5 | | Continuous channel current |  |  |  | 128 | mA |  | 5 | | Input clamp current | IIK | -50 |  |  | mA | VI < 0 | 5 | | Junction temperature | TJ |  |  | 150 | °C |  | 5 | | Storage temperature range | Tstg | -65 |  | 150 | °C |  | 5 |-| Junction-to-ambient thermal resistance (DCT) | RθJA |  | 220 |  | °C/W | DCT (SM8), 8 pins | 5 |-| Junction-to-case (top) thermal resistance (DCT) | RθJC(top) |  | 128.1 |  | °C/W | DCT (SM8), 8 pins | 5 |-| Junction-to-board thermal resistance (DCT) | RθJB |  | 135.6 |  | °C/W | DCT (SM8), 8 pins | 5 |-| Junction-to-top characterization parameter (DCT) | ψJT |  | 56 |  | °C/W | DCT (SM8), 8 pins | 5 |-| Junction-to-board characterization parameter (DCT) | ψJB |  | 134 |  | °C/W | DCT (SM8), 8 pins | 5 |+| Junction-to-ambient thermal resistance (DCT) | RθJA |  | 220 |  | °C/W | DCT (SM8) 8-pin | 5 |+| Junction-to-case (top) thermal resistance (DCT) | RθJC(top) |  | 128.1 |  | °C/W | DCT (SM8) 8-pin | 5 |+| Junction-to-board thermal resistance (DCT) | RθJB |  | 135.6 |  | °C/W | DCT (SM8) 8-pin | 5 |+| Junction-to-top characterization parameter (DCT) | ψJT |  | 56 |  | °C/W | DCT (SM8) 8-pin | 5 |+| Junction-to-board characterization parameter (DCT) | ψJB |  | 134 |  | °C/W | DCT (SM8) 8-pin | 5 |  ## CAD (Adom-generated) 
lsf0102dctr.lbr+14−3
@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>Texas Instruments Translators / Level Shifters, DCT (SSOP-8, 3.0 x 3.0 mm, 0.65 mm pitch). Pinout cross-checked by two models against the datasheet</description> <packages> <package name="Texas_Instruments_LSF0102_2543ce">   <description>8 pads, 4.9 x 2.4 mm. Generated from the Texas Instruments datasheet land pattern (family D2543ce, spec 2543ce36be)</description>@@ -73,6 +73,7 @@ </packages> <symbols> <symbol name="LSF0102DCTR">+  <description>Texas Instruments Translators / Level Shifters, DCT (SSOP-8, 3.0 x 3.0 mm, 0.65 mm pitch). Pinout cross-checked by two models against the datasheet</description>   <wire x1="-12.7" y1="5.08" x2="12.7" y2="5.08" width="0.254" layer="94"/>   <wire x1="12.7" y1="5.08" x2="12.7" y2="-7.62" width="0.254" layer="94"/>   <wire x1="12.7" y1="-7.62" x2="-12.7" y2="-7.62" width="0.254" layer="94"/>@@ -91,7 +92,7 @@ </symbols> <devicesets> <deviceset name="LSF0102DCTR" prefix="U">-  <description></description>+  <description>Texas Instruments Translators / Level Shifters, DCT (SSOP-8, 3.0 x 3.0 mm, 0.65 mm pitch). Pinout cross-checked by two models against the datasheet</description>   <gates>     <gate name="G$1" symbol="LSF0102DCTR" x="0" y="0"/>   </gates>@@ -107,7 +108,17 @@         <connect gate="G$1" pin="B1" pad="6"/>         <connect gate="G$1" pin="B2" pad="5"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="LSF0102DCTR" constant="no"/>+          <attribute name="MANUFACTURER" value="Texas Instruments" constant="no"/>+          <attribute name="DATASHEET" value="https://www.ti.com/lit/ds/symlink/lsf0102.pdf" constant="no"/>+          <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/lsf0102dctr" constant="no"/>+          <attribute name="MOUSER_PN" value="595-LSF0102DCTR" constant="no"/>+          <attribute name="DIGIKEY_PN" value="296-40398-2-ND" constant="no"/>+          <attribute name="LCSC_PN" value="C132024" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>
package.json+372−16
@@ -1,8 +1,8 @@ {   "slug": "lsf0102dctr",-  "version": "0.1.1",+  "version": "0.1.2",   "type": "component",-  "description": "Texas Instruments Translators / Level Shifters, DCT (SSOP-8, 3.0 x 3.0 mm, 0.65 mm pitch). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "description": "Texas Instruments Translators / Level Shifters, SSOP-8 (TI DCT, SM8) 2.95 x 4 mm, 0.65 pitch. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [     "component",     "logic",@@ -35,7 +35,7 @@     "land_source": "datasheet",     "land_note": "TI DCT0008A Example Board Layout (lsf0102.pdf p.28, drawing 4220784): 8X (1.1) x 8X (0.4) pads, 6X (0.65) pitch, (3.8) between pad-row centres, read from this part's own sheet; land from part-reviewer's DCT0008A template (sn74lvc1g74dctr).",     "manufacturer": "Texas Instruments",-    "package": "DCT (SSOP-8, 3.0 x 3.0 mm, 0.65 mm pitch)",+    "package": "SSOP-8 (TI DCT, SM8) 2.95 x 4 mm, 0.65 pitch",     "pin_count": 8,     "category": "Logic",     "subcategory": "Translators / Level Shifters",@@ -55,7 +55,7 @@       "mouser": "595-LSF0102DCTR"     },     "distributor_check": {-      "checked_at": "2026-11-18T16:09:25Z",+      "checked_at": "2026-11-18T17:46:21Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "296-40398-2-ND",@@ -71,49 +71,49 @@         "number": "1",         "name": "GND",         "type": "power_in",-        "description": "Ground reference pin for the device."+        "description": "Ground reference for the device."       },       {         "number": "2",         "name": "Vref_A",         "type": "power_in",-        "description": "Reference supply for the A-side; it must be the lowest voltage in the system and the datasheet specifies 0.9 V to 5.5 V."+        "description": "Reference supply voltage for the A-side, operational from 0.95 V to 5.5 V and required to be the lowest voltage level across all inputs and outputs."       },       {         "number": "3",         "name": "A1",         "type": "bidirectional",-        "description": "Auto-bidirectional data port on the low-voltage (A) side, with I/O voltage limited to 0 V to 5.5 V and clamped to Vref_A when driven from the B side."+        "description": "Auto-bidirectional data port on the low-side (A) channel 1; recommended input/output voltage range is 0 V to 5.5 V."       },       {         "number": "4",         "name": "A2",         "type": "bidirectional",-        "description": "Auto-bidirectional data port on the low-voltage (A) side, with I/O voltage limited to 0 V to 5.5 V and clamped to Vref_A when driven from the B side."+        "description": "Auto-bidirectional data port on the low-side (A) channel 2; recommended input/output voltage range is 0 V to 5.5 V."       },       {         "number": "5",         "name": "B2",         "type": "bidirectional",-        "description": "Auto-bidirectional data port on the high-voltage (B) side, with I/O voltage limited to 0 V to 5.5 V; pull-up resistors to VPU are required on the B side."+        "description": "Auto-bidirectional data port on the high-side (B) channel 2; pull-up resistors are always required on the high side."       },       {         "number": "6",         "name": "B1",         "type": "bidirectional",-        "description": "Auto-bidirectional data port on the high-voltage (B) side, with I/O voltage limited to 0 V to 5.5 V; pull-up resistors to VPU are required on the B side."+        "description": "Auto-bidirectional data port on the high-side (B) channel 1; pull-up resistors are always required on the high side."       },       {         "number": "7",         "name": "Vref_B",         "type": "power_in",-        "description": "Reference supply for the B-side and EN bias; it must be at least Vref_A + 0.8 V and no more than 5.5 V, with a 0.1 µF filter capacitor recommended."+        "description": "Reference supply for the B-side that biases the device, operational from 1.8 V to 5.5 V and recommended to be at least Vref_A + 0.8 V; a 0.1 µF filter capacitor is recommended."       },       {         "number": "8",         "name": "EN",         "type": "input",-        "description": "Enable input that must be tied directly to Vref_B and pulled up through a 200 kΩ bias resistor; driving it LOW places all I/O pins in the high-impedance state."+        "description": "Enable input that must be tied directly to Vref_B and pulled up to VCCB through a 200 kΩ bias resistor; driving it LOW places all I/O pins in high impedance."       }     ],     "provenance": {@@ -127,11 +127,11 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Table 4-1 gives only grouped pin numbers for An (3, 4) and Bn (6, 5). The individual mapping A1=3, A; Table 4-1 lists the type of Vref_A and Vref_B as '—'. I classified them as power_in because they are; The requested package size of 3.0 x 3.0 mm does not match the datasheet. The package table lists DCT"+          "extractor flagged: Pin numbers and names are taken from Table 4-1 (DCT, DCU or DDF package) and the functional block di; Datasheet Table 4-1 gives no I/O type for GND, Vref_A, or Vref_B (shown as —). Types power_in were a; The recommended operating range 0 to 5.5 V for An/Bn is from the Recommended Operating Conditions ta"         ],         "pages_sent": 42,-        "cost_usd": 0.1319,-        "at": "2026-11-18T16:09:14"+        "cost_usd": 0.1292,+        "at": "2026-11-18T17:46:08"       },       "datasheet": {         "url": "https://www.ti.com/lit/ds/symlink/lsf0102.pdf",@@ -187,10 +187,366 @@         "zmin_mm": 0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "f8702b1b7df20a9f0ef9c73d03787633244ff7455bafa858e3d53e4edaa098e1",+        "sha256": "077add2680210d23b22e0edd4eb8fd73ab088b504ca551d8fd17389620d7ad42",         "checked": "2026-11-18",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ]+  },+  "metadata": {+    "characteristics": {+      "version": 1,+      "source": "datasheet",+      "rows": [+        {+          "name": "Input clamp voltage",+          "symbol": "VIK",+          "kind": "electrical",+          "unit": "V",+          "min": null,+          "typ": null,+          "max": -1.2,+          "conditions": "II = –18mA, VEN = 0",+          "source_page": 6,+          "source": "datasheet"+        },+        {+          "name": "High-level input current",+          "symbol": "IIH",+          "kind": "electrical",+          "unit": "µA",+          "min": null,+          "typ": null,+          "max": 5,+          "conditions": "VI = 5V, VEN = 0",+          "source_page": 6,+          "source": "datasheet"+        },+        {+          "name": "Quiescent supply current",+          "symbol": "ICC",+          "kind": "electrical",+          "unit": "µA",+          "min": null,+          "typ": null,+          "max": 6,+          "conditions": "Vref_B = VEN = 5.5V, Vref_A = 4.5V, IO = 0, VI = VCC or GND",+          "source_page": 6,+          "source": "datasheet"+        },+        {+          "name": "Input capacitance (Vref_A/B/EN)",+          "symbol": "CI(ref_A/B/EN)",+          "kind": "electrical",+          "unit": "pF",+          "min": null,+          "typ": null,+          "max": 11,+          "conditions": "VI = 3V or 0",+          "source_page": 6,+          "source": "datasheet"+        },+        {+          "name": "Input/output capacitance, switch off",+          "symbol": "Cio(off)",+          "kind": "electrical",+          "unit": "pF",+          "min": null,+          "typ": 4,+          "max": 6,+          "conditions": "VO = 3V or 0, VEN = 0",+          "source_page": 6,+          "source": "datasheet"+        },+        {+          "name": "Input/output capacitance, switch on",+          "symbol": "Cio(on)",+          "kind": "electrical",+          "unit": "pF",+          "min": null,+          "typ": 10.5,+          "max": 12.5,+          "conditions": "VO = 3V or 0, VEN = 3V",+          "source_page": 6,+          "source": "datasheet"+        },+        {+          "name": "On-state resistance",+          "symbol": "ron",+          "kind": "electrical",+          "unit": "Ω",+          "min": null,+          "typ": 8,+          "max": null,+          "conditions": "VI = 0, IO = 64mA; Vref_A = 3.3V; Vref_B = VEN = 5V",+          "source_page": 6,+          "source": "datasheet"+        },+        {+          "name": "On-state resistance",+          "symbol": "ron",+          "kind": "electrical",+          "unit": "Ω",+          "min": null,+          "typ": 9,+          "max": null,+          "conditions": "VI = 0, IO = 64mA; Vref_A = 1.8V; Vref_B = VEN = 5V",+          "source_page": 6,+          "source": "datasheet"+        },+        {+          "name": "On-state resistance",+          "symbol": "ron",+          "kind": "electrical",+          "unit": "Ω",+          "min": null,+          "typ": 10,+          "max": null,+          "conditions": "VI = 0, IO = 64mA; Vref_A = 1.0V; Vref_B = VEN = 5V",+          "source_page": 6,+          "source": "datasheet"+        },+        {+          "name": "On-state resistance",+          "symbol": "ron",+          "kind": "electrical",+          "unit": "Ω",+          "min": null,+          "typ": 15,+          "max": null,+          "conditions": "VI = 0, IO = 32mA; Vref_A = 2.5V; Vref_B = VEN = 5V",+          "source_page": 6,+          "source": "datasheet"+        },+        {+          "name": "On-state resistance",+          "symbol": "ron",+          "kind": "electrical",+          "unit": "Ω",+          "min": null,+          "typ": 18,+          "max": null,+          "conditions": "VI = 1.0V, IO = 10mA; Vref_A = 1.8V; Vref_B = VEN = 3.3V",+          "source_page": 6,+          "source": "datasheet"+        },+        {+          "name": "On-state resistance",+          "symbol": "ron",+          "kind": "electrical",+          "unit": "Ω",+          "min": null,+          "typ": 20,+          "max": null,+          "conditions": "VI = 0V, IO = 10mA; Vref_A = 1.0V; Vref_B = VEN = 3.3V",+          "source_page": 6,+          "source": "datasheet"+        },+        {+          "name": "On-state resistance",+          "symbol": "ron",+          "kind": "electrical",+          "unit": "Ω",+          "min": null,+          "typ": 30,+          "max": null,+          "conditions": "VI = 0V, IO = 10mA; Vref_A = 1.0V; Vref_B = VEN = 1.8V",+          "source_page": 6,+          "source": "datasheet"+        },+        {+          "name": "Input/output voltage",+          "symbol": "VI/O",+          "kind": "recommended_operating",+          "unit": "V",+          "min": 0,+          "typ": null,+          "max": 5.5,+          "conditions": "",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Reference voltage",+          "symbol": "Vref_A/B/EN",+          "kind": "recommended_operating",+          "unit": "V",+          "min": 0,+          "typ": null,+          "max": 5.5,+          "conditions": "",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Pass transistor current",+          "symbol": "IPASS",+          "kind": "recommended_operating",+          "unit": "mA",+          "min": null,+          "typ": null,+          "max": 64,+          "conditions": "",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Operating free-air temperature",+          "symbol": "TA",+          "kind": "recommended_operating",+          "unit": "°C",+          "min": -40,+          "typ": null,+          "max": 125,+          "conditions": "",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Reference voltage (A)",+          "symbol": "Vref_A",+          "kind": "recommended_operating",+          "unit": "V",+          "min": 0.9,+          "typ": null,+          "max": 5.5,+          "conditions": "Vref_A is the lowest voltage level across all inputs and outputs",+          "source_page": 18,+          "source": "datasheet"+        },+        {+          "name": "Input voltage",+          "symbol": "VI",+          "kind": "absolute_maximum",+          "unit": "V",+          "min": -0.5,+          "typ": null,+          "max": 7,+          "conditions": "",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Input/output voltage",+          "symbol": "VI/O",+          "kind": "absolute_maximum",+          "unit": "V",+          "min": -0.5,+          "typ": null,+          "max": 7,+          "conditions": "",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Continuous channel current",+          "symbol": "",+          "kind": "absolute_maximum",+          "unit": "mA",+          "min": null,+          "typ": null,+          "max": 128,+          "conditions": "",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Input clamp current",+          "symbol": "IIK",+          "kind": "absolute_maximum",+          "unit": "mA",+          "min": -50,+          "typ": null,+          "max": null,+          "conditions": "VI < 0",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Junction temperature",+          "symbol": "TJ",+          "kind": "absolute_maximum",+          "unit": "°C",+          "min": null,+          "typ": null,+          "max": 150,+          "conditions": "",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Storage temperature range",+          "symbol": "Tstg",+          "kind": "absolute_maximum",+          "unit": "°C",+          "min": -65,+          "typ": null,+          "max": 150,+          "conditions": "",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Junction-to-ambient thermal resistance (DCT)",+          "symbol": "RθJA",+          "kind": "thermal",+          "unit": "°C/W",+          "min": null,+          "typ": 220,+          "max": null,+          "conditions": "DCT (SM8), 8 pins",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Junction-to-case (top) thermal resistance (DCT)",+          "symbol": "RθJC(top)",+          "kind": "thermal",+          "unit": "°C/W",+          "min": null,+          "typ": 128.1,+          "max": null,+          "conditions": "DCT (SM8), 8 pins",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Junction-to-board thermal resistance (DCT)",+          "symbol": "RθJB",+          "kind": "thermal",+          "unit": "°C/W",+          "min": null,+          "typ": 135.6,+          "max": null,+          "conditions": "DCT (SM8), 8 pins",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Junction-to-top characterization parameter (DCT)",+          "symbol": "ψJT",+          "kind": "thermal",+          "unit": "°C/W",+          "min": null,+          "typ": 56,+          "max": null,+          "conditions": "DCT (SM8), 8 pins",+          "source_page": 5,+          "source": "datasheet"+        },+        {+          "name": "Junction-to-board characterization parameter (DCT)",+          "symbol": "ψJB",+          "kind": "thermal",+          "unit": "°C/W",+          "min": null,+          "typ": 134,+          "max": null,+          "conditions": "DCT (SM8), 8 pins",+          "source_page": 5,+          "source": "datasheet"+        }+      ]+    }   } }
page.json+18−23
@@ -4,7 +4,7 @@   "slug": "lsf0102dctr",   "title": "LSF0102DCTR",   "brief": "Texas Instruments Translators / Level Shifters, DCT (SSOP-8, 3.0 x 3.0 mm, 0.65 mm pitch). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.1",+  "version": "0.1.2",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -18,7 +18,7 @@     "land_source": "datasheet",     "land_note": "TI DCT0008A Example Board Layout (lsf0102.pdf p.28, drawing 4220784): 8X (1.1) x 8X (0.4) pads, 6X (0.65) pitch, (3.8) between pad-row centres, read from this part's own sheet; land from part-reviewer's DCT0008A template (sn74lvc1g74dctr).",     "manufacturer": "Texas Instruments",-    "package": "DCT (SSOP-8, 3.0 x 3.0 mm, 0.65 mm pitch)",+    "package": "SSOP-8 (TI DCT, SM8) 2.95 x 4 mm, 0.65 pitch",     "pin_count": 8,     "category": "Logic",     "subcategory": "Translators / Level Shifters",@@ -38,7 +38,7 @@       "mouser": "595-LSF0102DCTR"     },     "distributor_check": {-      "checked_at": "2026-11-18T16:09:25Z",+      "checked_at": "2026-11-18T17:46:21Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "296-40398-2-ND",@@ -54,49 +54,49 @@         "number": "1",         "name": "GND",         "type": "power_in",-        "description": "Ground reference pin for the device."+        "description": "Ground reference for the device."       },       {         "number": "2",         "name": "Vref_A",         "type": "power_in",-        "description": "Reference supply for the A-side; it must be the lowest voltage in the system and the datasheet specifies 0.9 V to 5.5 V."+        "description": "Reference supply voltage for the A-side, operational from 0.95 V to 5.5 V and required to be the lowest voltage level across all inputs and outputs."       },       {         "number": "3",         "name": "A1",         "type": "bidirectional",-        "description": "Auto-bidirectional data port on the low-voltage (A) side, with I/O voltage limited to 0 V to 5.5 V and clamped to Vref_A when driven from the B side."+        "description": "Auto-bidirectional data port on the low-side (A) channel 1; recommended input/output voltage range is 0 V to 5.5 V."       },       {         "number": "4",         "name": "A2",         "type": "bidirectional",-        "description": "Auto-bidirectional data port on the low-voltage (A) side, with I/O voltage limited to 0 V to 5.5 V and clamped to Vref_A when driven from the B side."+        "description": "Auto-bidirectional data port on the low-side (A) channel 2; recommended input/output voltage range is 0 V to 5.5 V."       },       {         "number": "5",         "name": "B2",         "type": "bidirectional",-        "description": "Auto-bidirectional data port on the high-voltage (B) side, with I/O voltage limited to 0 V to 5.5 V; pull-up resistors to VPU are required on the B side."+        "description": "Auto-bidirectional data port on the high-side (B) channel 2; pull-up resistors are always required on the high side."       },       {         "number": "6",         "name": "B1",         "type": "bidirectional",-        "description": "Auto-bidirectional data port on the high-voltage (B) side, with I/O voltage limited to 0 V to 5.5 V; pull-up resistors to VPU are required on the B side."+        "description": "Auto-bidirectional data port on the high-side (B) channel 1; pull-up resistors are always required on the high side."       },       {         "number": "7",         "name": "Vref_B",         "type": "power_in",-        "description": "Reference supply for the B-side and EN bias; it must be at least Vref_A + 0.8 V and no more than 5.5 V, with a 0.1 µF filter capacitor recommended."+        "description": "Reference supply for the B-side that biases the device, operational from 1.8 V to 5.5 V and recommended to be at least Vref_A + 0.8 V; a 0.1 µF filter capacitor is recommended."       },       {         "number": "8",         "name": "EN",         "type": "input",-        "description": "Enable input that must be tied directly to Vref_B and pulled up through a 200 kΩ bias resistor; driving it LOW places all I/O pins in the high-impedance state."+        "description": "Enable input that must be tied directly to Vref_B and pulled up to VCCB through a 200 kΩ bias resistor; driving it LOW places all I/O pins in high impedance."       }     ],     "provenance": {@@ -110,11 +110,11 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Table 4-1 gives only grouped pin numbers for An (3, 4) and Bn (6, 5). The individual mapping A1=3, A; Table 4-1 lists the type of Vref_A and Vref_B as '—'. I classified them as power_in because they are; The requested package size of 3.0 x 3.0 mm does not match the datasheet. The package table lists DCT"+          "extractor flagged: Pin numbers and names are taken from Table 4-1 (DCT, DCU or DDF package) and the functional block di; Datasheet Table 4-1 gives no I/O type for GND, Vref_A, or Vref_B (shown as —). Types power_in were a; The recommended operating range 0 to 5.5 V for An/Bn is from the Recommended Operating Conditions ta"         ],         "pages_sent": 42,-        "cost_usd": 0.1319,-        "at": "2026-11-18T16:09:14"+        "cost_usd": 0.1292,+        "at": "2026-11-18T17:46:08"       },       "datasheet": {         "url": "https://www.ti.com/lit/ds/symlink/lsf0102.pdf",@@ -170,23 +170,16 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "f8702b1b7df20a9f0ef9c73d03787633244ff7455bafa858e3d53e4edaa098e1",+        "sha256": "077add2680210d23b22e0edd4eb8fd73ab088b504ca551d8fd17389620d7ad42",         "checked": "2026-11-18",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ]   },   "metadata": {-    "specs": {-      "Manufacturer": "Texas Instruments",-      "Package": "DCT (SSOP-8, 3.0 x 3.0 mm, 0.65 mm pitch)",-      "Category": "Logic",-      "Pins": "8"-    },     "characteristics": {       "version": 1,       "source": "datasheet",-      "datasheet_sha256": "4a9ba815d97f74780be5fd27c8309b48a2601d892c91f0a5f7c39c30106ec634",       "rows": [         {           "name": "Input clamp voltage",@@ -577,5 +570,7 @@   ],   "visibility": {     "public": true-  }+  },+  "description": "Texas Instruments Translators / Level Shifters, SSOP-8 (TI DCT, SM8) 2.95 x 4 mm, 0.65 pitch. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file