main
History Download
Ray Publish 0.1.0 63187a4

LS7366R

LSI/CSI · Counters, Dividers · DIP-14

LS7366R from LSI/CSI, in a DIP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 fCKO output Crystal oscillator output; a crystal connected between fCKi and fCKO generates the basic filter clock for A, B and INDEX/ inputs in quadrature mode, with sink/source of about 4mA at VDD = 5V.
2 fCKi input Crystal/external clock input generating the filter clock for A, B and INDEX/ inputs in quadrature mode (divided by 2 if MDR0=1), and tied to a stable logic state in non-quadrature mode.
3 VSS power_in Ground reference for the device (VDD - VSS supply of 3V to 5.5V).
4 SS/ input Slave Select input; a high-to-low transition selects the device for serial transfer and a low-to-high transition ends transfer and puts MISO in high impedance.
5 SCK input Serial shift clock input supplied by the host processor for clocking data in on MOSI and out on MISO (slave mode only).
6 MISO tri_state Serial data output (MSB first) shifted out on SCK trailing edges, going to high impedance when SS/ is high so multiple slave outputs can be wire-ORed.
7 MOSI input Serial data input from the host processor, shifted in MSB first on the leading edges of SCK.
8 LFLAG/ output Programmable open-drain latched output flagging Carry, Borrow, Compare and INDEX, which is restored to high impedance only by clearing the STR and can be wired as a shared interrupt line.
9 DFLAG/ output Programmable push-pull instantaneous output that goes low on Carry, Borrow, Compare and INDEX conditions, configured through MDR1.
10 INDEX/ input Programmable index input (active low) from the encoder index output, configurable via MDR0 as LCNTR, RCNTR, LOTR or masked, in synchronous or asynchronous mode.
11 B input Quadrature clock input B from the incremental encoder, digitally filtered in quadrature mode and serving as the direction input in non-quadrature mode (high = up, low = down).
12 A input Quadrature clock input A from the incremental encoder, digitally filtered in quadrature mode and serving as the count input in non-quadrature mode.
13 CNT_EN input Counting enable input, with counting enabled when high and disabled when low, and an internal pull-up resistor.
14 VDD power_in Positive supply, 3.0V to 5.5V relative to VSS, with an absolute maximum of +7.0V.

Key specifications

Parameter Value
Manufacturer LSI/CSI
Package DIP-14
Category Logic
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VDD 3 5.5 V 5
Supply Current IDD 300 400 450 µA VDD = 3.0V 5
Supply Current IDD 700 800 950 µA VDD = 5.0V 5
fCKi Logic high VCH 2.3 V VDD = 3.0V 5
fCKi Logic high VCH 3.7 V VDD = 5.0V 5
fCKi Logic Low VCL 0.7 V VDD = 3.0V 5
fCKi Logic Low VCL 1.3 V VDD = 5.0 5
All other inputs, Logic High VAH 2.1 V VDD = 3.0V 5
All other inputs, Logic High VAH 3.5 V VDD = 5.0V 5
All other inputs, Logic Low VAL 0.5 V VDD = 3.0V 5
All other inputs, Logic Low VAL 1 V VDD = 5.0V 5
CNT_EN Low input current IIEL 3 5 µA VAL = 0.7V, VDD = 3.0V 5
CNT_EN Low input current IIEL 10 15 µA VAL = 1.2V, VDD = 5.0V 5
CNT_EN High input current IIEH 1 3 µA VAH = 1.9V, VDD = 3.0V 5
CNT_EN High input current IIEH 6 9 µA VAH = 3.2V, VDD = 5.0V 5
LFLAG, DFLAG Sink current IOFL -1.3 -2 mA VOUT = 0.5V, VDD = 3.0V 5
LFLAG, DFLAG Sink current IOFL -3.2 -4 mA VOUT = 0.5V, VDD = 5.0V 5
DFLAG Source current IOFH 1 1.8 mA VOUT = 2.5V, VDD = 3.0V 5
DFLAG Source current IOFH 2.8 3.6 mA VOUT = 4.5V, VDD = 5.0V 5
fCKO Sink current IOCL -1.3 -2 mA VOUT = 0.5V, VDD = 3.0V 5
fCKO Sink current IOCL -3.2 -4 mA VOUT = 0.5V, VDD = 5.0V 5
fCKO Source current IOCH 1.3 2 mA VOUT = 2.5V, VDD = 3.0V 5
fCKO Source current IOCH 3.2 4 mA VOUT = 4.5V, VDD = 5.0V 5
TXD/MISO Sink current IOML -1.5 -2.4 mA VOUT = 0.5V, VDD = 3.0V 5
TXD/MISO Sink current IOML -3.8 -4.8 mA VOUT = 0.5V, VDD = 5.0V 5
TXD/MISO Source current IOMH 1.5 2.4 mA VOUT = 2.5V, VDD = 3.0V 5
TXD/MISO Source current IOMH 3.8 4.8 mA VOUT = 4.5V, VDD = 5.0V 5
SCK High Pulse Width tCH 100 ns VDD = 5V ± 10% 5
SCK Low Pulse Width tCL 100 ns VDD = 5V ± 10% 5
SS/ Set Up Time tCSL 100 ns VDD = 5V ± 10% 5
SS/ Hold Time tCSH 100 ns VDD = 5V ± 10% 5
Inter Command SS/ high tCSI 100 ns VDD = 5V ± 10% 5
fCKI Frequency fFCK 40 MHz VDD = 5V ± 10% 5
Quadrature Clock frequency fQA, fQB 9.6 MHz VDD = 5V ± 10%, fQA = fQB < 1/4t3 5
SCK High Pulse Width tCH 120 ns VDD = 3.3V ± 10% 6
SCK Low Pulse Width tCL 120 ns VDD = 3.3V ± 10% 6
SS/ Set Up Time tCSL 120 ns VDD = 3.3V ± 10% 6
SS/ Hold Time tCSH 120 ns VDD = 3.3V ± 10% 6
Inter Command SS/ high tCSI 120 ns VDD = 3.3V ± 10% 6
fCKI Frequency fFCK 20 MHz VDD = 3.3V ± 10% 6
Quadrature Clock frequency fQA, fQB 4.5 MHz VDD = 3.3V ± 10%, fQA = fQB < 1/4t3 6
DC Supply Voltage VDD 7 V referenced to Vss 4
Input Voltage VIN -0.3 V Vss - 0.3 to VDD + 0.3 V 4
Operating Temperature TA -25 80 °C 4
Storage Temperature TSTG 65 150 °C printed as 65 to +150 4

CAD (KiCad official)

  • Symbol: LS7366R
  • Footprint: Package_DIP:DIP-14_W7.62mm
  • 3D model: DIP-14 (KiCad packages3D, STEP)
  • 3D model files: ls7366r-etched.step / ls7366r-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ls7366r.step / ls7366r.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: LSI/CSI datasheet, copy hosted by LCSC (17 pp, sha256 51b1ffc0846b8ad0, retrieved 2026-11-20)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF