component
LRAN12CFTR013
Public Made by Adomby adom
NCT Current Sense Resistors/Shunt Resistors, 1206. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLRAN12CFTR013
NCT · Current Sense Resistors/Shunt Resistors · 1206
LRAN12CFTR013 from NCT, in a 1206. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised resistor; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised resistor; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NCT |
| Package | 1206 |
| Category | Resistors |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Resistance tolerance (code F = ±1%) | -1 | 1 | % | Tolerance letter F in part-numbering table | 3 | ||
| Temperature coefficient of resistance | TCR | -50 | 50 | ppm/°C | Printed as ±50 ppm/°C for LRAN12 series | 4 | |
| Rated power (1W class, 1mΩ-39mΩ) | P | 1 | W | 1W for 1mΩ-39mΩ range; derate above 70°C | 4 | ||
| Maximum rated current (1W row) | I | 31.62 | A | Printed for 1W row, 1mΩ-39mΩ range | 4 | ||
| Maximum overload current (1W row) | 70.71 | A | Printed for 1W row, 1mΩ-39mΩ range | 4 | |||
| Operating temperature range | T | -55 | 170 | °C | 使用温度范围 for LRAN12 | 4 | |
| Insulation resistance | 100 | MΩ | 100 VDC applied 1 min, electrodes to protective layer and to substrate | 8 | |||
| Short time overload resistance change | -0.5 | 0.5 | % | 5 s at X5 rated power, measured after 24 h rest | 8 | ||
| Biased humidity resistance change | -0.5 | 0.5 | % | 85°C, 85%RH, rated current, 90 min ON/30 min OFF, 1000 h | 8 | ||
| Temperature cycling resistance change | -0.5 | 0.5 | % | -55°C to +125°C, 1000 cycles | 8 | ||
| Low temperature exposure resistance change | -0.5 | 0.5 | % | -55°C, 1000 h storage | 8 | ||
| High temperature exposure resistance change | -1 | 1 | % | 170°C, 1000 h storage | 9 | ||
| Load life resistance change | -1 | 1 | % | 70°C, rated current, 90 min ON/30 min OFF, 1000 h | 9 | ||
| Resistance to solder heat resistance change | -0.5 | 0.5 | % | 260°C solder bath, 10 s | 9 | ||
| Resistance to solvent resistance change | -0.5 | 0.5 | % | Isopropyl alcohol 20-25°C, 60 s | 9 | ||
| Joint strength of solder resistance change | -0.5 | 0.5 | % | Bend test on solder joint board | 9 | ||
| Solderability (electrode tin coverage) | 95 | % | 245°C bath, 3 s; new solder area on electrode | 9 | |||
| Storage temperature | 5 | 35 | °C | Sealed storage, 40-75 %RH, shelf life 2 years | 11 |
CAD (KiCad official)
- Symbol:
LRAN12CFTR013 - Footprint:
Resistor_SMD:R_1206_3216Metric - 3D model: 1206 (KiCad packages3D, STEP)
- 3D model files:
lran12cftr013-etched.step/lran12cftr013-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lran12cftr013.step/lran12cftr013.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NCT datasheet (12 pp, sha256
4926e4a6a23e1c06, retrieved 2026-10-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).