main
Ray
Publish 0.2.0
058faae
LR8341A-T36
LR · Linear Voltage Regulators (LDO) · SOT-23-3L
LR8341A-T36 from LR, in a SOT-23-3L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VSS | power_in | Ground pin (labelled VSS in the pin assignment and GND in the block diagram), the reference for all voltage values. |
| 2 | VOUT | power_out | Regulated 3.6V output (±1% at VIN=VOUT+2V, IOUT=10mA) that delivers 100mA, with a 1-10uF output capacitor recommended and short-circuit current limited to 15mA typical. |
| 3 | VIN | power_in | Supply input rated up to 40V operating (55V absolute maximum), which should have a bypass capacitor of 1-10uF placed close to it. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LR |
| Package | SOT-23-3L |
| Category | Power Management |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VIN | 40 | V | ISS=5uA | 5 | ||
| Output Voltage (nominal, selection table) | VOUT | 3.6 | V | 2 | |||
| Output Current | IOUT | 100 | mA | VIN= VOUT+2V | 5 | ||
| Line Regulation | ΔVOUT | -30 | 30 | mV | VOUT+2V≤VIN≤40V, IOUT=5mA | 5 | |
| Load Regulation | ΔVOUT | -50 | 50 | mV | VIN= VOUT+2V, 1mA≤IOUT≤100mA | 5 | |
| Dropout Voltage | VDrop | 320 | 390 | 450 | mV | IOUT=50mA, ΔVOUT=±2%*VOUT | 5 |
| Dropout Voltage | VDrop | 600 | 750 | 900 | mV | IOUT=100mA, ΔVOUT=±2%*VOUT | 5 |
| Power Supply Rejection Ratio | PSRR | 75 | VIN= VOUT+1V, IOUT=10mA, f=100Hz | 5 | |||
| Power Supply Rejection Ratio | PSRR | 60 | VIN= VOUT+1V, IOUT=10mA, f=1kHz | 5 | |||
| Power Supply Rejection Ratio | PSRR | 45 | VIN= VOUT+1V, IOUT=10mA, f=10kHz | 5 | |||
| Quiescent Current | ISS | 2 | 5 | uA | VIN= VOUT+2V | 5 | |
| Short-circuit Current | ISCP | 15 | mA | VOUT=GND | 5 | ||
| Temperature Coefficient | ΔVOUT/(ΔTa*VOUT) | -100 | 50 | 100 | ppm/℃ | VIN= VOUT+1V, IOUT=10mA, -40℃≤Ta≤85℃ | 5 |
| Maximum Input Voltage | VIN | 55 | V | 4 | |||
| Maximum Output Voltage (as printed; symbol IOUT) | IOUT | 160 | mA | 4 | |||
| Power Dissipation | PD | 250 | mW | SOT23-3L | 4 | ||
| Operating Temperature | TOPR | -40 | 105 | ℃ | 4 | ||
| Storage Temperature | TSTG | -40 | 125 | ℃ | 4 | ||
| ESD Human Body Model | -3000 | 3000 | V | H.B.M POS/NEG | 4 | ||
| Junction-to-ambient thermal resistance | θJA | 500 | °C/W | SOT23-3L | 8 |
CAD (KiCad official)
- Symbol:
LR8341A-T36 - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3L (KiCad packages3D, STEP)
- 3D model files:
lr8341a-t36-etched.step/lr8341a-t36-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lr8341a-t36.step/lr8341a-t36.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LR datasheet (13 pp, sha256
0ef57f5e903211ad, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LR8341A-T36
**LR** · Linear Voltage Regulators (LDO) · SOT-23-3L
LR8341A-T36 from LR, in a SOT-23-3L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VSS | power_in | Ground pin (labelled VSS in the pin assignment and GND in the block diagram), the reference for all voltage values. |
| 2 | VOUT | power_out | Regulated 3.6V output (±1% at VIN=VOUT+2V, IOUT=10mA) that delivers 100mA, with a 1-10uF output capacitor recommended and short-circuit current limited to 15mA typical. |
| 3 | VIN | power_in | Supply input rated up to 40V operating (55V absolute maximum), which should have a bypass capacitor of 1-10uF placed close to it. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LR |
| Package | SOT-23-3L |
| Category | Power Management |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VIN | | | 40 | V | ISS=5uA | 5 |
| Output Voltage (nominal, selection table) | VOUT | | 3.6 | | V | | 2 |
| Output Current | IOUT | | 100 | | mA | VIN= VOUT+2V | 5 |
| Line Regulation | ΔVOUT | -30 | | 30 | mV | VOUT+2V≤VIN≤40V, IOUT=5mA | 5 |
| Load Regulation | ΔVOUT | -50 | | 50 | mV | VIN= VOUT+2V, 1mA≤IOUT≤100mA | 5 |
| Dropout Voltage | VDrop | 320 | 390 | 450 | mV | IOUT=50mA, ΔVOUT=±2%*VOUT | 5 |
| Dropout Voltage | VDrop | 600 | 750 | 900 | mV | IOUT=100mA, ΔVOUT=±2%*VOUT | 5 |
| Power Supply Rejection Ratio | PSRR | | 75 | | | VIN= VOUT+1V, IOUT=10mA, f=100Hz | 5 |
| Power Supply Rejection Ratio | PSRR | | 60 | | | VIN= VOUT+1V, IOUT=10mA, f=1kHz | 5 |
| Power Supply Rejection Ratio | PSRR | | 45 | | | VIN= VOUT+1V, IOUT=10mA, f=10kHz | 5 |
| Quiescent Current | ISS | | 2 | 5 | uA | VIN= VOUT+2V | 5 |
| Short-circuit Current | ISCP | | 15 | | mA | VOUT=GND | 5 |
| Temperature Coefficient | ΔVOUT/(ΔTa*VOUT) | -100 | 50 | 100 | ppm/℃ | VIN= VOUT+1V, IOUT=10mA, -40℃≤Ta≤85℃ | 5 |
| Maximum Input Voltage | VIN | | | 55 | V | | 4 |
| Maximum Output Voltage (as printed; symbol IOUT) | IOUT | | | 160 | mA | | 4 |
| Power Dissipation | PD | | | 250 | mW | SOT23-3L | 4 |
| Operating Temperature | TOPR | -40 | | 105 | ℃ | | 4 |
| Storage Temperature | TSTG | -40 | | 125 | ℃ | | 4 |
| ESD Human Body Model | | -3000 | | 3000 | V | H.B.M POS/NEG | 4 |
| Junction-to-ambient thermal resistance | θJA | | 500 | | °C/W | SOT23-3L | 8 |
## CAD (KiCad official)
- Symbol: `LR8341A-T36`
- Footprint: `Package_TO_SOT_SMD:SOT-23-3`
- 3D model: SOT-23-3L (KiCad packages3D, STEP)
- 3D model files: `lr8341a-t36-etched.step` / `lr8341a-t36-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lr8341a-t36.step` / `lr8341a-t36.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [LR datasheet](docs/lr8341a-t36-datasheet.pdf) (13 pp, sha256 `0ef57f5e903211ad`, retrieved 2026-11-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lr8341a-t36-datasheet.pdf)