component
LR8341A-M30
Public Made by Adomby adom
LR Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-89-3. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLR8341A-M30
LR · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-89-3
LR8341A-M30 from LR, in a SOT-89-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference; all voltages are specified relative to GND. |
| 2 | VIN | power_in | Input supply, operating up to 40V (absolute maximum 55V), requires an input capacitor of at least 1uF ceramic placed close to the pin. |
| 3 | VOUT | power_out | Fixed 3.0V regulated output for the M30 variant, 100mA typical output current, requires an output capacitor of at least 1uF and has short-circuit protection of 15mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LR |
| Package | SOT-89-3 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Maximum input supply voltage | VIN | 55 | V | 4 | |||
| Maximum output current | IOUT | 160 | mA | 4 | |||
| Power dissipation | PD | 500 | mW | SOT89-3 | 4 | ||
| Operating temperature | TOPR | -40 | 105 | ℃ | 4 | ||
| Storage temperature | TSTG | -40 | 125 | ℃ | 4 | ||
| ESD human body model (H.B.M POS/NEG) | -3000 | 3000 | V | H.B.M POS/NEG; printed ±3000 | 4 | ||
| Input voltage | VIN | 40 | V | ISS=5uA | 4 | ||
| Line regulation | △VOUT | -30 | 30 | mV | VOUT+2V≤VIN≤40V, IOUT=5mA | 4 | |
| Load regulation | △VOUT | -50 | 50 | mV | VIN=VOUT+2V, 1mA≤IOUT≤100mA | 4 | |
| Minimum dropout voltage | VDrop | 320 | 390 | 450 | mV | IOUT=50mA, △VOUT=±2%*VOUT | 4 |
| Minimum dropout voltage | VDrop | 600 | 750 | 900 | mV | IOUT=100mA, △VOUT=±2%*VOUT | 4 |
| Quiescent current | ISS | 2 | 5 | uA | VIN=VOUT+2V | 5 | |
| Temperature coefficient | △VOUT/(△Ta*VOUT) | -100 | 50 | 100 | ppm/℃ | VIN=VOUT+1V, IOUT=10mA, -40℃≤Ta≤85℃ | 5 |
| Output voltage (3.0 V variant, -M30) | VOUT | 3 | V | VIN=VOUT+2V, IOUT=10mA; printed limits VOUT0.99 to VOUT1.01 not resolved to numbers | 4 | ||
| Maximum junction temperature (absolute) | TJ(MAX) | 150 | °C | 8 | |||
| Recommended maximum junction temperature | TJ | 125 | °C | normal operation | 8 | ||
| Input capacitor | 1 | uF | ceramic, recommended at least | 8 | |||
| Output capacitor | 1 | uF | ceramic, recommended at least | 8 | |||
| Thermal resistance junction-to-ambient | θJA | 200 | °C/W | SOT89-3 | 8 |
CAD (KiCad official)
- Symbol:
LR8341A-M30 - Footprint:
Package_TO_SOT_SMD:SOT-89-3 - 3D model: SOT-89-3 (KiCad packages3D, STEP)
- 3D model files:
lr8341a-m30-etched.step/lr8341a-m30-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lr8341a-m30.step/lr8341a-m30.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LR datasheet (12 pp, sha256
9debd2ff576f27c4, retrieved 2026-10-19, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).