3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLR8323B-T18
LR · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5L
LR8323B-T18 from LR, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Unregulated input supply. Operating input range up to 24V (absolute max 32V). Bypass to GND with a ≥1uF ceramic capacitor placed close to the pin to ensure stability and good transient response. |
| 2 | GND | power_in | Device ground reference and return for input/output capacitors. All voltages in the electrical characteristics table are referenced to this pin. |
| 3 | CE | input | Chip Enable (ON/OFF) input. Drive high to enable the regulator; drive to 0V (VCE=0V) to enter shutdown mode where ISHD ≈ ±1uA. Do not leave floating. |
| 4 | NC | unconnected | No internal connection. May be left floating or tied to GND; do not use as a routing via. |
| 5 | VOUT | power_out | Regulated output, fixed 1.8V (T18 suffix). Delivers up to 300mA typical; OCP kicks in at ~450mA and short-circuit current is clamped to ~20mA when VOUT<0.7V. Requires a ≥1uF ceramic output capacitor to GND for stability and load-transient response. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LR |
| Package | SOT-23-5L |
| Category | PMIC |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
LR8323B-T18LR8323B-M18LR8323A-T18LR8323A-M18
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage | VIN | 24 | V | ISS=5uA | 4 | ||
| Line regulation | ΔVOUT | -30 | 30 | mV | VOUT+2V≤VIN≤24V, IOUT=10mA | 4 | |
| Load regulation | ΔVOUT | -50 | 50 | mV | VIN=VOUT+2V, 1mA≤IOUT≤300mA | 4 | |
| Dropout voltage | VDrop | 300 | 360 | 420 | mV | IOUT=100mA, ΔVOUT=±2%*VOUT | 4 |
| Dropout voltage | VDrop | 600 | 700 | 800 | mV | IOUT=200mA, ΔVOUT=±2%*VOUT | 4 |
| Shutdown current | ISHD | -1 | 1 | uA | VIN=VOUT+2V, VCE=0V | 5 | |
| Quiescent current | ISS | 2.5 | 5 | uA | VIN=VOUT+2V | 5 | |
| Temperature coefficient | ΔVOUT/(ΔTa*VOUT) | -100 | 50 | 100 | ppm/℃ | VIN=VOUT+2V, IOUT=10mA, -40℃≤Ta≤85℃ | 5 |
| Maximum input supply voltage | VIN | 32 | V | 4 | |||
| Maximum output current | IOUT | 450 | mA | 4 | |||
| Power dissipation (SOT23 package) | PD | 250 | mW | SOT23 package | 4 | ||
| Operating temperature | TOPR | -10 | 85 | ℃ | 4 | ||
| Storage temperature | TSTG | -40 | 125 | ℃ | 4 | ||
| ESD, Human Body Model | -3000 | 3000 | V | H.B.M POS/NEG | 4 | ||
| Maximum junction temperature (limit parameter) | 150 | °C | stated in section 9.2 text | 6 | |||
| Recommended maximum junction temperature in normal operation | 125 | °C | stated in section 9.2 text | 6 |
CAD (KiCad official)
- Symbol:
LR8323B-T18 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files:
lr8323b-t18-etched.step/lr8323b-t18-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lr8323b-t18.step/lr8323b-t18.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LR datasheet (11 pp, sha256
19e3748c68fb39fe, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).