LR8103B-T30
LR · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5L
LR8103B-T30 from LR, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Positive supply input. Absolute max 9V; recommended operating up to 6.5V. Bypass with ≥1µF ceramic capacitor close to the pin; a ~10Ω series resistor is recommended to absorb upstream transients. |
| 2 | GND | power_in | Ground reference for the regulator. All voltages in the datasheet are referenced to this pin. Use a wide ground pour for noise immunity and improved thermal dissipation. |
| 3 | CE | input | Chip enable (active-high). VCE ≥ 0.7V enables the regulator; VCE = 0V shuts it down (ISHD ≈ ±1µA). Specified enable-high threshold: 0.7V min, 1.2V max at VIN = 2.2V, IOUT = 1mA. Do not leave floating; tie to VIN if always-on operation is desired. |
| 4 | NC | unconnected | No internal connection. Leave floating or tie to GND for mechanical stability; do not use as a routing point. |
| 5 | VOUT | power_out | Regulated 3.0V output (±1%), rated for 300mA continuous (450mA absolute max). Requires ≥1µF ceramic output capacitor for stability; larger values improve transient response. Internal short-circuit protection clamps ISCP to ~30mA when VOUT falls below 0.7V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LR |
| Package | SOT-23-5L |
| Category | PMIC |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
LR8103B-T30LR8103A-T30
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy | VOUT | -1 | 1 | % | VIN=VCE=VOUT+1V, IOUT=10mA | 4 | |
| Enable voltage | VCE | 0.7 | 1.2 | V | VIN=2.2V, IOUT=1mA | 4 | |
| Input voltage | VIN | 6.5 | V | ISS=1uA | 4 | ||
| Line regulation | ΔVOUT | -30 | 30 | mV | VOUT+1V≤VIN≤6.5V, VIN=VCE, IOUT=10mA | 4 | |
| Load regulation | ΔVOUT | -40 | 40 | mV | VIN=VCE=VOUT+1V, 1mA≤IOUT≤100mA | 4 | |
| Shutdown current | ISHD | -1 | 1 | uA | VIN=VOUT+1V, VCE=0V | 5 | |
| Quiescent current | ISS | 0.8 | 1 | uA | VIN=VCE=VOUT+1V | 5 | |
| Temperature coefficient of output voltage | ΔVOUT/(ΔTa*VOUT) | -100 | 100 | ppm/℃ | VIN=VCE=VOUT+1V, IOUT=10mA, -40℃≤Ta≤85℃ | 5 | |
| Maximum input supply voltage | VIN | 9 | V | 4 | |||
| Maximum output current | IOUT | 450 | mA | 4 | |||
| Power dissipation | PD | 250 | mW | SOT23-5L | 4 | ||
| Operating temperature | TOPR | -10 | 85 | ℃ | 4 | ||
| Storage temperature | TSTG | -40 | 125 | ℃ | 4 | ||
| ESD human body model | -2000 | 2000 | V | H.B.M POS/NEG | 4 | ||
| Maximum junction temperature | TJ(MAX) | 150 | ℃ | 6 | |||
| Recommended maximum junction temperature in normal operation | TJ | 125 | ℃ | Normal operation, for reliability | 6 | ||
| Recommended input capacitor | 1 | uF | Ceramic capacitor, at input pin | 6 | |||
| Recommended output capacitor | 1 | uF | Ceramic capacitor, for stable output | 6 | |||
| Thermal resistance junction to ambient | θJA | 500 | °C/W | SOT23-5L | 6 |
CAD (KiCad official)
- Symbol:
LR8103B-T30 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files:
lr8103b-t30-etched.step/lr8103b-t30-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lr8103b-t30.step/lr8103b-t30.glbare the bare package body.
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
lr8103b-t30.step |
85 KB | You want the bare part, or you mark your own boards. |
lr8103b-t30-etched.step |
2.3 MB | You want the part with LR8103B-T30 already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 551 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LR datasheet (10 pp, sha256
1164d007f79e861e, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).