main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lr8103b-t18: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lr8103b-t18: viewers · Ray
lr8103b-t18-etched.fit.json lr8103b-t18: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lr8103b-t18-etched.glb lr8103b-t18: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lr8103b-t18-etched.step lr8103b-t18: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lr8103b-t18.glb Publish 0.1.0 · Ray
lr8103b-t18.kicad_mod Publish 0.1.0 · Ray
lr8103b-t18.kicad_sym Publish 0.1.0 · Ray
lr8103b-t18.lbr Publish 0.1.0 · Ray
lr8103b-t18.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json lr8103b-t18: specified limits as data (metadata.characteristics, 19 rows from the datasheet) · Ray
README.md lr8103b-t18: specified limits as data (metadata.characteristics, 19 rows from the datasheet) · Ray

LR8103B-T18

LR · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5L

LR8103B-T18 from LR, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Input supply pin. Accepts 2.8V-6.5V (VOUT+1V minimum for regulation, 6.5V absolute max recommended; 9V hard abs-max). Bypass with at least a 1µF ceramic capacitor placed close to the pin; a series 10Ω resistor is recommended to absorb upstream input spikes.
2 GND power_in Device ground / reference return. All voltages are referenced to this pin. Tie to a solid ground plane for best thermal and noise performance.
3 CE input Chip Enable (active high). VCE ≥ 0.7V (max 1.2V threshold spec at VIN=2.2V) turns the regulator on; VCE=0V puts the part in shutdown with ISHD ≤ 1µA. Do not leave floating; tie to VIN for always-on operation.
4 NC unconnected No internal connection. Leave floating or tie to GND; do not use as a routing via.
5 VOUT power_out Regulated 1.8V output (±1% initial accuracy), delivering up to 300mA typical (450mA abs-max). Requires at least a 1µF ceramic output capacitor for loop stability and transient response; larger values reduce transient droop. Short-circuit protection clamps output current to ~30mA when VOUT falls below 0.7V.

Key specifications

Parameter Value
Manufacturer LR
Package SOT-23-5L
Category PMIC
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • LR8103B-T18
  • LR8103A-T18

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage VIN 6.5 V ISS=1uA 4
Enable voltage VCE 0.7 1.2 V VIN=2.2V, IOUT=1mA 4
Output voltage tolerance (1.8V nominal) VOUT -1 1 % Output voltage accuracy ±1% (features) 1
Line regulation ΔVOUT -30 30 mV VOUT+1V≤VIN≤6.5V, VIN=VCE, IOUT=10mA 4
Load regulation ΔVOUT -40 40 mV VIN=VCE=VOUT+1V, 1mA≤IOUT≤100mA 4
Shutdown current ISHD -1 1 uA VIN=VOUT+1V, VCE=0V 5
Quiescent current ISS 0.8 1 uA VIN=VCE=VOUT+1V 5
Output voltage temperature coefficient ΔVOUT/(ΔTa*VOUT) -100 50 100 ppm/℃ VIN=VCE=VOUT+1V, IOUT=10mA, -40℃≤Ta≤85℃ 5
Maximum input voltage VIN 9 V 4
Maximum output current IOUT 450 mA 4
Power dissipation (SOT23-5L) PD 250 mW SOT23-5L 4
Operating temperature TOPR -10 85 ℃ 4
Storage temperature TSTG -40 125 ℃ 4
ESD HBM -2000 2000 V H.B.M POS/NEG 4
Maximum junction temperature TJ(MAX) 150 ℃ Absolute maximum operating rating 6
Recommended maximum junction temperature TJ 125 ℃ Recommended for normal operation 6
Junction-to-ambient thermal resistance θJA 500 °C/W SOT23-5L 6
Input capacitor CIN 1 uF Ceramic, recommended minimum 6
Output capacitor COUT 1 uF Ceramic, recommended minimum 6

CAD (KiCad official)

  • Symbol: LR8103B-T18
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5L (KiCad packages3D, STEP)
  • 3D model files: lr8103b-t18-etched.step / lr8103b-t18-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lr8103b-t18.step / lr8103b-t18.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: LR datasheet (10 pp, sha256 1164d007f79e861e, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF