← Commit history
page.json+7−4@@ -32,7 +32,7 @@ "number": "1", "name": "VIN", "type": "power_in",- "description": "Input supply pin. Accepts 2.8V-6.5V (VOUT+1V minimum for regulation, 6.5V absolute max recommended; 9V hard abs-max). Bypass with at least a 1\u00b5F ceramic capacitor placed close to the pin; a series 10\u03a9 resistor is recommended to absorb upstream input spikes."+ "description": "Input supply pin. Accepts 2.8V-6.5V (VOUT+1V minimum for regulation, 6.5V absolute max recommended; 9V hard abs-max). Bypass with at least a 1µF ceramic capacitor placed close to the pin; a series 10Ω resistor is recommended to absorb upstream input spikes." }, { "number": "2",@@ -44,7 +44,7 @@ "number": "3", "name": "CE", "type": "input",- "description": "Chip Enable (active high). VCE \u2265 0.7V (max 1.2V threshold spec at VIN=2.2V) turns the regulator on; VCE=0V puts the part in shutdown with ISHD \u2264 1\u00b5A. Do not leave floating; tie to VIN for always-on operation."+ "description": "Chip Enable (active high). VCE ≥ 0.7V (max 1.2V threshold spec at VIN=2.2V) turns the regulator on; VCE=0V puts the part in shutdown with ISHD ≤ 1µA. Do not leave floating; tie to VIN for always-on operation." }, { "number": "4",@@ -56,7 +56,7 @@ "number": "5", "name": "VOUT", "type": "power_out",- "description": "Regulated 1.8V output (\u00b11% initial accuracy), delivering up to 300mA typical (450mA abs-max). Requires at least a 1\u00b5F ceramic output capacitor for loop stability and transient response; larger values reduce transient droop. Short-circuit protection clamps output current to ~30mA when VOUT falls below 0.7V."+ "description": "Regulated 1.8V output (±1% initial accuracy), delivering up to 300mA typical (450mA abs-max). Requires at least a 1µF ceramic output capacitor for loop stability and transient response; larger values reduce transient droop. Short-circuit protection clamps output current to ~30mA when VOUT falls below 0.7V." } ], "provenance": {@@ -120,5 +120,8 @@ "docs/lr8103b-t18-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }