component
LR6205B28M
Public Made by Adomby adom
LRC Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
LR6205B28M
LRC · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
LR6205B28M from LRC, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input pin; the datasheet specifies an input voltage of 2.0 V to 6.0 V, with absolute maximum rating VSS-0.3 V to VSS+7 V. |
| 2 | VSS | power_in | Ground pin, the reference for the input, output and CE levels. |
| 3 | CE | input | Chip enable input, TTL-logic controlled; for this B-suffix part it is active-high with a built-in pull-down resistor, with CE "High" at least 1.5 V (up to VIN) and CE "Low" at most 0.3 V, and CE = VSS gives a standby current of 0.1 µA. |
| 4 | NC | unconnected | No connection. |
| 5 | VOUT | power_out | Regulated output pin; the 2.8 V output (per the part designator 28) is rated for output current up to 500 mA in the electrical characteristics, with 600 mA absolute maximum and 100 mA typical short-circuit current. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LRC |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy (High Accuracy, Typ.) | -2 | 2 | % | Printed in Features as ±2% (Typ.) | 1 | ||
| Input Voltage | VIN | 2 | 6 | V | 3 | ||
| Output Current | IOUT | 500 | mA | 3 | |||
| Supply Current | ISS | 50 | 100 | µA | IOUT=0 | 3 | |
| Standby Current | ISTBY | 0.1 | µA | CE = VSS | 3 | ||
| Dropout Voltage | Vdif | 150 | mV | IOUT=150mA; VOUT 2.8V (relation glyph lost in extraction) | 3 | ||
| Load Regulation | ΔVOUT | 10 | mV | VIN=VOUT+1V; 1mA≤IOUT≤100mA | 3 | ||
| Line Regulation | ΔVOUT/(VOUT×ΔVIN) | 0.01 | 0.2 | %/V | IOUT=10mA; VOUT+1V≤VIN≤6V | 3 | |
| Output Voltage Temperature Characteristics | ΔVOUT/(ΔT×VOUT) | 100 | ppm | IOUT=10mA; -40≤T≤+85°C | 3 | ||
| Short Current | IShort | 100 | mA | VOUT=VSS | 3 | ||
| Dropout Voltage per Dropout Voltage Chart (VOUT 2.8V) | Vdif | 160 | 220 | mV | IOUT=150mA; VOUT=2.8V | 4 | |
| Power Supply Rejection Rate at 217Hz | PSRR | 80 | dB | IOUT=50mA; f=217Hz | 4 | ||
| Power Supply Rejection Rate at 1kHz | PSRR | 75 | dB | IOUT=50mA; f=1kHz | 4 | ||
| Power Supply Rejection Rate at 10kHz | PSRR | 70 | dB | IOUT=50mA; f=10kHz | 4 | ||
| CE High Voltage | VCE“H” | 1.5 | V | 4 | |||
| CE Low Voltage | VCE“L” | 0.3 | V | 4 | |||
| Input Voltage (absolute maximum) | VIN | -0.3 | 7 | V | Referenced to VSS | 3 | |
| Output Voltage (absolute maximum) | VOUT | -0.3 | V | Referenced to VSS | 3 | ||
| Output Current (absolute maximum) | IOUT | 600 | mA | 3 | |||
| Power Dissipation SOT-23 | Pd | 370 | mW | 3 | |||
| Operating Temperature | Topr | -40 | 85 | °C | 3 | ||
| Storage Temperature | Tstg | -40 | 125 | °C | 3 | ||
| Soldering Temperature | Tsolder | 260 | °C | 10 s | 3 |
CAD (KiCad official)
- Symbol:
LR6205B28M - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
lr6205b28m-etched.step/lr6205b28m-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lr6205b28m.step/lr6205b28m.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LRC datasheet (12 pp, sha256
2af85bd95481bfb8, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LR6205B28M
**LRC** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
LR6205B28M from LRC, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input pin; the datasheet specifies an input voltage of 2.0 V to 6.0 V, with absolute maximum rating VSS-0.3 V to VSS+7 V. |
| 2 | VSS | power_in | Ground pin, the reference for the input, output and CE levels. |
| 3 | CE | input | Chip enable input, TTL-logic controlled; for this B-suffix part it is active-high with a built-in pull-down resistor, with CE "High" at least 1.5 V (up to VIN) and CE "Low" at most 0.3 V, and CE = VSS gives a standby current of 0.1 µA. |
| 4 | NC | unconnected | No connection. |
| 5 | VOUT | power_out | Regulated output pin; the 2.8 V output (per the part designator 28) is rated for output current up to 500 mA in the electrical characteristics, with 600 mA absolute maximum and 100 mA typical short-circuit current. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LRC |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy (High Accuracy, Typ.) | | -2 | | 2 | % | Printed in Features as ±2% (Typ.) | 1 |
| Input Voltage | VIN | 2 | | 6 | V | | 3 |
| Output Current | IOUT | 500 | | | mA | | 3 |
| Supply Current | ISS | | 50 | 100 | µA | IOUT=0 | 3 |
| Standby Current | ISTBY | | | 0.1 | µA | CE = VSS | 3 |
| Dropout Voltage | Vdif | | | 150 | mV | IOUT=150mA; VOUT 2.8V (relation glyph lost in extraction) | 3 |
| Load Regulation | ΔVOUT | | | 10 | mV | VIN=VOUT+1V; 1mA≤IOUT≤100mA | 3 |
| Line Regulation | ΔVOUT/(VOUT×ΔVIN) | | 0.01 | 0.2 | %/V | IOUT=10mA; VOUT+1V≤VIN≤6V | 3 |
| Output Voltage Temperature Characteristics | ΔVOUT/(ΔT×VOUT) | | 100 | | ppm | IOUT=10mA; -40≤T≤+85°C | 3 |
| Short Current | IShort | | 100 | | mA | VOUT=VSS | 3 |
| Dropout Voltage per Dropout Voltage Chart (VOUT 2.8V) | Vdif | | 160 | 220 | mV | IOUT=150mA; VOUT=2.8V | 4 |
| Power Supply Rejection Rate at 217Hz | PSRR | | 80 | | dB | IOUT=50mA; f=217Hz | 4 |
| Power Supply Rejection Rate at 1kHz | PSRR | | 75 | | dB | IOUT=50mA; f=1kHz | 4 |
| Power Supply Rejection Rate at 10kHz | PSRR | | 70 | | dB | IOUT=50mA; f=10kHz | 4 |
| CE High Voltage | VCE“H” | 1.5 | | | V | | 4 |
| CE Low Voltage | VCE“L” | | | 0.3 | V | | 4 |
| Input Voltage (absolute maximum) | VIN | -0.3 | | 7 | V | Referenced to VSS | 3 |
| Output Voltage (absolute maximum) | VOUT | -0.3 | | | V | Referenced to VSS | 3 |
| Output Current (absolute maximum) | IOUT | | | 600 | mA | | 3 |
| Power Dissipation SOT-23 | Pd | | | 370 | mW | | 3 |
| Operating Temperature | Topr | -40 | | 85 | °C | | 3 |
| Storage Temperature | Tstg | -40 | | 125 | °C | | 3 |
| Soldering Temperature | Tsolder | | | 260 | °C | 10 s | 3 |
## CAD (KiCad official)
- Symbol: `LR6205B28M`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `lr6205b28m-etched.step` / `lr6205b28m-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lr6205b28m.step` / `lr6205b28m.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [LRC datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590921458598703104) (12 pp, sha256 `2af85bd95481bfb8`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lr6205b28m-datasheet.pdf)