main
Ray
Publish 0.1.0
479f50d
LR6205B25M
LRC · Linear Voltage Regulators (LDO) · SOT-23-5
LR6205B25M from LRC, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input pin; the datasheet gives an operating input voltage of 2.0V to 6.0V and an absolute maximum of VSS-0.3V to VSS+7V. |
| 2 | VSS | power_in | Ground pin, used as the reference for the input and output voltage ratings. |
| 3 | CE | input | Chip enable input for the B variant (high active); VCE high minimum is 1.5V (up to VIN), VCE low maximum is 0.3V, and CE = VSS gives standby current of 0.1uA typical. |
| 4 | NC | unconnected | No connection; the datasheet lists this pin as not connected internally. |
| 5 | VOUT | power_out | Regulated output pin; output voltage is 1.2V to 5.0V and output current is rated up to 500mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LRC |
| Package | SOT-23-5 |
| Category | Power Management |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage accuracy | VOUT(E) | -2 | 2 | % | IOUT=1mA, VIN=VOUT+1V | 3 | |
| Supply Current | ISS | 50 | 100 | µA | IOUT=0 | 3 | |
| Standby Current | ISTBY | 0.1 | µA | CE = VSS | 3 | ||
| Output Current | IOUT | 500 | mA | 3 | |||
| Dropout Voltage | Vdif | 180 | 400 | mV | IOUT=150mA, VOUT=2.5V | 4 | |
| Load Regulation | ΔVOUT | 10 | mV | VIN=VOUT+1V, 1mA<=IOUT<=100mA | 3 | ||
| Line Regulation | ΔVOUT/(VOUT·ΔVIN) | 0.01 | 0.2 | %/V | IOUT=10mA, VOUT+1V<=VIN<=6V | 3 | |
| Output Voltage Temperature Characteristics | ΔVOUT/(ΔT·VOUT) | 100 | ppm/°C | IOUT=10mA, -40<=T<=+85 | 3 | ||
| Short Current | IShort | 100 | mA | VOUT=VSS | 3 | ||
| Input Voltage | VIN | 2 | 6 | V | 3 | ||
| CE High Voltage | VCE(H) | 1.5 | V | upper limit printed as VIN | 4 | ||
| CE Low Voltage | VCE(L) | 0.3 | V | 4 | |||
| Input Voltage (absolute maximum, relative to VSS) | VIN | -0.3 | 7 | V | VSS-0.3 to VSS+7 | 3 | |
| Output Voltage (absolute maximum) | VOUT | -0.3 | V | VSS-0.3 to VIN+0.3, max printed as VIN+0.3 | 3 | ||
| Output Current (absolute maximum) | IOUT | 600 | mA | 3 | |||
| Power Dissipation SOT-23 | Pd | 370 | mW | SOT-23 package | 3 | ||
| Operating Temperature | Topr | -40 | 85 | °C | 3 | ||
| Storage Temperature | Tstg | -40 | 125 | °C | 3 | ||
| Soldering Temperature | Tsolder | 260 | °C | 10s | 3 |
CAD (KiCad official)
- Symbol:
LR6205B25M - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
lr6205b25m-etched.step/lr6205b25m-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lr6205b25m.step/lr6205b25m.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LRC datasheet (12 pp, sha256
1094e874ab392e42, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LR6205B25M
**LRC** · Linear Voltage Regulators (LDO) · SOT-23-5
LR6205B25M from LRC, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input pin; the datasheet gives an operating input voltage of 2.0V to 6.0V and an absolute maximum of VSS-0.3V to VSS+7V. |
| 2 | VSS | power_in | Ground pin, used as the reference for the input and output voltage ratings. |
| 3 | CE | input | Chip enable input for the B variant (high active); VCE high minimum is 1.5V (up to VIN), VCE low maximum is 0.3V, and CE = VSS gives standby current of 0.1uA typical. |
| 4 | NC | unconnected | No connection; the datasheet lists this pin as not connected internally. |
| 5 | VOUT | power_out | Regulated output pin; output voltage is 1.2V to 5.0V and output current is rated up to 500mA. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LRC |
| Package | SOT-23-5 |
| Category | Power Management |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage accuracy | VOUT(E) | -2 | | 2 | % | IOUT=1mA, VIN=VOUT+1V | 3 |
| Supply Current | ISS | | 50 | 100 | µA | IOUT=0 | 3 |
| Standby Current | ISTBY | | | 0.1 | µA | CE = VSS | 3 |
| Output Current | IOUT | 500 | | | mA | | 3 |
| Dropout Voltage | Vdif | | 180 | 400 | mV | IOUT=150mA, VOUT=2.5V | 4 |
| Load Regulation | ΔVOUT | | | 10 | mV | VIN=VOUT+1V, 1mA<=IOUT<=100mA | 3 |
| Line Regulation | ΔVOUT/(VOUT·ΔVIN) | | 0.01 | 0.2 | %/V | IOUT=10mA, VOUT+1V<=VIN<=6V | 3 |
| Output Voltage Temperature Characteristics | ΔVOUT/(ΔT·VOUT) | | 100 | | ppm/°C | IOUT=10mA, -40<=T<=+85 | 3 |
| Short Current | IShort | | 100 | | mA | VOUT=VSS | 3 |
| Input Voltage | VIN | 2 | | 6 | V | | 3 |
| CE High Voltage | VCE(H) | 1.5 | | | V | upper limit printed as VIN | 4 |
| CE Low Voltage | VCE(L) | | | 0.3 | V | | 4 |
| Input Voltage (absolute maximum, relative to VSS) | VIN | -0.3 | | 7 | V | VSS-0.3 to VSS+7 | 3 |
| Output Voltage (absolute maximum) | VOUT | -0.3 | | | V | VSS-0.3 to VIN+0.3, max printed as VIN+0.3 | 3 |
| Output Current (absolute maximum) | IOUT | | | 600 | mA | | 3 |
| Power Dissipation SOT-23 | Pd | | | 370 | mW | SOT-23 package | 3 |
| Operating Temperature | Topr | -40 | | 85 | °C | | 3 |
| Storage Temperature | Tstg | -40 | | 125 | °C | | 3 |
| Soldering Temperature | Tsolder | | | 260 | °C | 10s | 3 |
## CAD (KiCad official)
- Symbol: `LR6205B25M`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `lr6205b25m-etched.step` / `lr6205b25m-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lr6205b25m.step` / `lr6205b25m.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [LRC datasheet](docs/lr6205b25m-datasheet.pdf) (12 pp, sha256 `1094e874ab392e42`, retrieved 2026-10-28, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lr6205b25m-datasheet.pdf)