main
Ray
lr431atslt1g: specified limits as data (metadata.characteristics, 15 rows from the datasheet)
b861f16
LR431ATSLT1G
LRC · Voltage Reference · SOT-23
LR431ATSLT1G from LRC, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REF | input | Reference input. Voltage-sensing input of the internal error amplifier; regulation forces this pin to Vref (typ. 2.5 V) relative to the Anode. Reference input current is typ. 1 μA (max 2 μA); off-state cathode current at VKA=36 V, VREF=0 is 0.05 μA typ. |
| 2 | K | passive | Cathode. Regulated shunt terminal; carries the controlled sink current IKA (regulation range 1-100 mA, min IKA for regulation 0.3 mA typ.). Absolute maximum cathode voltage 36 V, cathode current range −100 to +150 mA. Dynamic impedance ~0.15 Ω typ. (0.5 Ω max) at f ≤ 1 kHz. |
| 3 | A | passive | Anode. Common/return terminal for the shunt reference; typically tied to circuit ground in shunt/series regulator topologies. Reference input voltage and cathode voltage are measured with respect to this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LRC |
| Package | SOT-23 |
| Category | PMIC |
| Pins | 3 |
Ordering variants
LR431ATSLT1GLR431ATSLT1GLR431BTSLT1GLR431ATSLT1GLR431APTSLT1GLR431ATSLT1GLR431BPTSLT1G
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reference input voltage (1% grade) | Vref | 2.475 | 2.5 | 2.525 | V | VKA=VREF,IKA=10mA | 2 |
| Deviation of reference input voltage over temperature | ΔVref | 4.5 | 25 | mV | VKA=VREF,IKA=10mA TMIN≤TA≤TMAX | 2 | |
| Ratio of change in reference input voltage to change in cathode voltage (ΔVKA=10V~VREF) | ΔVref/ΔVKA | -1 | -2.7 | mV/V | IKA=10mA, ΔVKA=10V~VREF | 2 | |
| Ratio of change in reference input voltage to change in cathode voltage (ΔVKA=36V~10V) | ΔVref/ΔVKA | -0.5 | -2 | mV/V | IKA=10mA, ΔVKA=36V~10V | 2 | |
| Reference input current | Iref | 1 | 2 | μA | IKA=10mA,R1=10kΩ,R2=∞ | 2 | |
| Deviation of reference input current over full temperature range | ΔIref/ΔT | 0.2 | 0.4 | μA | IKA=10mA,R1=10kΩ,R2=∞,TA=full Temperature range | 2 | |
| Minimum cathode current for regulation | IKA(min) | 0.3 | 0.5 | mA | VKA=VREF | 2 | |
| Off-state cathode current | IKA(OFF) | 0.05 | 0.5 | μA | VKA=36V,VREF=0 | 2 | |
| Dynamic impedance | ZKA | 0.15 | 0.5 | Ω | VKA=VREF,IKA=1 to 100mA, f≤1.0kHz | 2 | |
| Cathode current, continuous | IKA | -1 | 100 | mA | 2 | ||
| Cathode voltage (recommended operating range, upper limit) | VKA | 36 | V | Lower limit VREF | 2 | ||
| Cathode current (recommended operating range) | IKA | 1 | 100 | mA | 2 | ||
| Operating ambient temperature range | -40 | 125 | °C | 2 | |||
| ESD rating, human body model | 4000 | V | HBM | 1 | |||
| Thermal resistance, junction to ambient | θJA | 206 | °C/W | 2 |
CAD (KiCad official)
- Symbol:
LR431ATSLT1G - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files:
lr431atslt1g-etched.step/lr431atslt1g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lr431atslt1g.step/lr431atslt1g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LRC datasheet (None pp, sha256
cb186c186cf5aa67, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LR431ATSLT1G
**LRC** · Voltage Reference · SOT-23
LR431ATSLT1G from LRC, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REF | input | Reference input. Voltage-sensing input of the internal error amplifier; regulation forces this pin to Vref (typ. 2.5 V) relative to the Anode. Reference input current is typ. 1 μA (max 2 μA); off-state cathode current at VKA=36 V, VREF=0 is 0.05 μA typ. |
| 2 | K | passive | Cathode. Regulated shunt terminal; carries the controlled sink current IKA (regulation range 1-100 mA, min IKA for regulation 0.3 mA typ.). Absolute maximum cathode voltage 36 V, cathode current range −100 to +150 mA. Dynamic impedance ~0.15 Ω typ. (0.5 Ω max) at f ≤ 1 kHz. |
| 3 | A | passive | Anode. Common/return terminal for the shunt reference; typically tied to circuit ground in shunt/series regulator topologies. Reference input voltage and cathode voltage are measured with respect to this pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LRC |
| Package | SOT-23 |
| Category | PMIC |
| Pins | 3 |
## Ordering variants
- `LR431ATSLT1G`
- `LR431ATSLT1GLR431BTSLT1G`
- `LR431ATSLT1GLR431APTSLT1G`
- `LR431ATSLT1GLR431BPTSLT1G`
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reference input voltage (1% grade) | Vref | 2.475 | 2.5 | 2.525 | V | VKA=VREF,IKA=10mA | 2 |
| Deviation of reference input voltage over temperature | ΔVref | | 4.5 | 25 | mV | VKA=VREF,IKA=10mA TMIN≤TA≤TMAX | 2 |
| Ratio of change in reference input voltage to change in cathode voltage (ΔVKA=10V~VREF) | ΔVref/ΔVKA | | -1 | -2.7 | mV/V | IKA=10mA, ΔVKA=10V~VREF | 2 |
| Ratio of change in reference input voltage to change in cathode voltage (ΔVKA=36V~10V) | ΔVref/ΔVKA | | -0.5 | -2 | mV/V | IKA=10mA, ΔVKA=36V~10V | 2 |
| Reference input current | Iref | | 1 | 2 | μA | IKA=10mA,R1=10kΩ,R2=∞ | 2 |
| Deviation of reference input current over full temperature range | ΔIref/ΔT | | 0.2 | 0.4 | μA | IKA=10mA,R1=10kΩ,R2=∞,TA=full Temperature range | 2 |
| Minimum cathode current for regulation | IKA(min) | | 0.3 | 0.5 | mA | VKA=VREF | 2 |
| Off-state cathode current | IKA(OFF) | | 0.05 | 0.5 | μA | VKA=36V,VREF=0 | 2 |
| Dynamic impedance | ZKA | | 0.15 | 0.5 | Ω | VKA=VREF,IKA=1 to 100mA, f≤1.0kHz | 2 |
| Cathode current, continuous | IKA | -1 | | 100 | mA | | 2 |
| Cathode voltage (recommended operating range, upper limit) | VKA | | | 36 | V | Lower limit VREF | 2 |
| Cathode current (recommended operating range) | IKA | 1 | | 100 | mA | | 2 |
| Operating ambient temperature range | | -40 | | 125 | °C | | 2 |
| ESD rating, human body model | | | | 4000 | V | HBM | 1 |
| Thermal resistance, junction to ambient | θJA | | 206 | | °C/W | | 2 |
## CAD (KiCad official)
- Symbol: `LR431ATSLT1G`
- Footprint: `Package_TO_SOT_SMD:SOT-23`
- 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files: `lr431atslt1g-etched.step` / `lr431atslt1g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lr431atslt1g.step` / `lr431atslt1g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [LRC datasheet](docs/lr431atslt1g-datasheet.pdf) (None pp, sha256 `cb186c186cf5aa67`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lr431atslt1g-datasheet.pdf)