main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lr358d: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lr358d: viewers · Ray
lr358d-etched.fit.json lr358d: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lr358d-etched.glb lr358d: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lr358d-etched.step lr358d: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lr358d.glb Publish 0.1.0 · Ray
lr358d.kicad_mod Publish 0.1.0 · Ray
lr358d.kicad_sym Publish 0.1.0 · Ray
lr358d.lbr Publish 0.1.0 · Ray
lr358d.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
page.json lr358d: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md lr358d: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

LR358D

LRC · Operational Amplifier · SOP-8

LR358D from LRC, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUTPUT 1 output Output of op-amp channel 1. Can swing from 0V (V(OL) typ 5mV @ Vcc=5V, RL=10k) to Vcc-1.5V. Short-circuit current typ 40mA. Source current up to 40mA typ.
2 INPUT 1- input Inverting input of op-amp channel 1. Input bias current typ 45nA (max 250nA), input offset current typ 5nA. Input voltage range -0.3V to 26V (absolute max).
3 INPUT 1+ input Non-inverting input of op-amp channel 1. Common-mode voltage range includes ground (0V to Vcc-1.5V). Input bias current typ 45nA.
4 GND power_in Ground / negative supply rail (Vee). Connect to 0V in single-supply operation, or to the negative rail (down to -13V) in split-supply operation.
5 INPUT 2+ input Non-inverting input of op-amp channel 2. Common-mode voltage range includes ground (0V to Vcc-1.5V). Input bias current typ 45nA.
6 INPUT 2- input Inverting input of op-amp channel 2. Input bias current typ 45nA (max 250nA), input offset current typ 5nA.
7 OUTPUT 2 output Output of op-amp channel 2. Output swings from 0V to Vcc-1.5V. Short-circuit current typ 40mA (max 60mA). Slew rate typ 1.0 V/µs.
8 Vcc power_in Positive supply. Single-supply operation 3V to 26V, or split-supply ±1.5V to ±13V. Absolute max ±15V or 30V single. Supply current typ 0.8mA (Vcc=25V, RL=∞).

Key specifications

Parameter Value
Manufacturer LRC
Package SOP-8
Category Op-amp/Cmp
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • LR358DD

CAD (KiCad official)

  • Symbol: LR358D
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: lr358d-etched.step / lr358d-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lr358d.step / lr358d.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
lr358d.step 122 KB You want the bare part, or you mark your own boards.
lr358d-etched.step 1.7 MB You want the part with LR358D already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 405 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: LRC datasheet (7 pp, sha256 6621c1f0759f20e9, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF