Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LR321

LRC · Operational Amplifier · SOT-23-5

LR321 from LRC, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 +IN input Non-inverting input of the op-amp. Rail-to-rail input common-mode range from (-VS - 0.1V) to (+VS + 0.1V); absolute limit (-VS) - 0.5V to (+VS) + 0.5V. Input bias current ~10pA typical.
2 -VS power_in Negative supply rail. Connect to GND for single-supply operation (2.5V-5.5V), or to a negative rail for dual-supply operation (±1.25V to ±2.75V). Absolute max V+ to V- = 7.5V.
3 -IN input Inverting input of the op-amp. Rail-to-rail input common-mode range; input bias current ~10pA typical, input offset voltage ±0.8mV typical (±5mV max).
4 OUT output Rail-to-rail output. Output swing ~8mV from rails at RL=100kΩ, ~80mV at RL=10kΩ. Short-circuit / output current capability ~23mA typ (20mA min). Can directly drive up to 250pF capacitive load in unity gain.
5 +VS power_in Positive supply rail. Operating range 2.1V to 5.5V (single-supply 2.5V-5.5V, dual-supply ±1.25V to ±2.75V). Quiescent current 60µA typical. Bypass with 0.1µF ceramic close to the pin.

Key specifications

Parameter Value
Manufacturer LRC
Package SOT-23-5
Category Op-amp/Cmp
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
输入失调电压 (VOS) VOS -5 0.8 5 mV VS = 5.5V 2
输入共模电压(Vcm) Vcm -0.1 5.6 V 2
共模抑制比(CMRR) CMRR 62 70 dB VS = 5.5V, VCM = -0.1V to 4V 2
共模抑制比(CMRR) CMRR 56 68 dB VS = 5.5V, VCM = -0.1V to 5.6V 2
开环增益(AOL) AOL 70 80 dB RL = 5KΩ, Vo = 0.1V to 4.9V 2
开环增益(AOL) AOL 80 84 dB RL = 100KΩ, Vo = 0.035V to 4.96V 2
工作电压范围 2.1 5.5 V 3
电源抑制比(PSRR) PSRR 60 80 dB Vs = +2.5 V to +5.5 V, VCM = (-VS)+0.5V, IOUT = 0 3
静态电流/Amplifier (IQ) IQ 60 80 µA Vs = +2.5 V to +5.5 V, VCM = (-VS)+0.5V, IOUT = 0 3
输出电流 (IOUT) IOUT 20 23 mA 2
供电电压 V+ to V- V+ to V- 7.5 V 2
贮存温度 -50 150 °C 2
结温 150 °C 2
工作温度 0 70 °C 2
Lead Temperature Range (Soldering) 250 °C Soldering 10 sec 2
输入失调电压漂移 (ΔVOS/ΔT) ΔVOS/ΔT 2.7 µV/℃ 2
输入偏置电流 (IB) IB 10 pA 2
输入失调电流 10 pA 2
输入电压摆幅 0.008 V RL = 100KΩ 2
输入电压摆幅 0.08 V RL = 10KΩ 2
增益带宽积(GBP) GBP 1 MHz CL = 100pF, G = +1 3
转换速率 (SR) SR 0.52 V/µs G = +1, 2V Output Step 3
电压噪声密度 (en) en 27 nV/ Hz f = 1kHz 3
电压噪声密度 (en) en 20 nV/ Hz f = 10kHz 3

CAD (KiCad official)

  • Symbol: LR321
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: lr321-etched.step / lr321-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lr321.step / lr321.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: LRC datasheet (8 pp, sha256 ffaa7779e8ef5c9e, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF