main
History Download
Ray lr2903d: specified limits as data (metadata.characteristics, 21 rows from the datasheet) 12e392f

LR2903D

LRC · Comparators · SOP-8

LR2903D from LRC, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT1 output Comparator 1 open-collector output. Sinks up to 6 mA (VOL=1.5 V, VID=-1 V typ); low-level output voltage 400 mV max at IOL=4 mA. Requires an external pull-up resistor to VCC.
2 IN1(-) input Comparator 1 inverting input. Common-mode range 0 to VCC-1.5 V (25 °C). Input bias current typ -25 nA; input offset voltage 2 mV typ, 5 mV max at 25 °C.
3 IN1(+) input Comparator 1 non-inverting input. Common-mode range 0 to VCC-1.5 V (25 °C); either input may go up to 30 V without damage but must not go below -0.3 V.
4 GND power_in Ground / negative supply return. Single-supply operation ties this to 0 V; split-supply operation ties this to the negative rail.
5 IN2(+) input Comparator 2 non-inverting input. Common-mode range 0 to VCC-1.5 V (25 °C); may go up to 30 V without damage.
6 IN2(-) input Comparator 2 inverting input. Common-mode range 0 to VCC-1.5 V (25 °C); input bias current typ -25 nA.
7 OUT2 output Comparator 2 open-collector output. Same drive characteristics as OUT1; requires an external pull-up resistor to VCC.
8 VCC power_in Positive supply. Operates from 5 V to 30 V (single supply) with low supply current independent of VCC (0.8 mA typ at VCC=5 V, 2.5 mA max full range at VCC=30 V).

Key specifications

Parameter Value
Manufacturer LRC
Package SOP-8
Category Op-amp/Cmp
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • LR2903DD

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage (25℃) VIO 2 5 mV VCC=5V to 30V, VIC=VICR min, VO=1.4V 2
Input offset voltage (full range) VIO 9 mV VCC=5V to 30V, VIC=VICR min, VO=1.4V, full range 2
Input offset current (25℃) lIO 5 50 nA VO=1.4V 2
Input offset current (full range) lIO 150 nA VO=1.4V, full range 2
Input bias current (25℃) IIB -25 -250 nA VO=1.4V 2
Input bias current (full range) IIB -400 nA VO=1.4V, full range 2
Common-mode input voltage range (25℃), lower limit VICR 0 V 25℃; upper limit printed as Vcc-1.5 2
Common-mode input voltage range (full range), lower limit VICR 0 V full range; upper limit printed as Vcc-2 2
Large-signal differential voltage amplification (25℃) AVD 50 200 V/mV VCC=15V, VO=1.4V to 11.4V, RL ≥ 15kΩ to Vcc 2
High-level output current (25℃), VOH=5V lOH 0.1 50 nA VOH=5V, VID=1V 2
High-level output current (full range), VOH=30V lOH 1 μA VOH=30V, VID=1V, full range 2
Low-level output voltage (25℃) VOL 150 400 mV IOL=4mA, VID=-1V 2
Low-level output voltage (full range) VOL 700 mV IOL=4mA, VID=-1V, full range 2
Low-level output current (25℃) lOL 6 mA VOL=1.5V, VID=-1V 2
Supply current (25℃), VCC=5V ICC 0.8 1 mA RL=∞, VCC=5V 2
Supply current (full range), VCC=30V ICC 2.5 mA RL=∞, VCC=30V, full range 2
Response time 1.3 μs 100mV input step with 5mV overdrive, RL connected to 5V through 5.1kΩ, CL=15pF 2
Response time 0.3 μs TTL-level input step, RL connected to 5V through 5.1kΩ, CL=15pF 2
Operating free-air temperature range (LR2903D) -40 125 ℃ Full range (MIN to MAX) for the LR2903D 2
Input voltage below ground (either input) -0.3 V Either input or common-mode should not go negative by more than this 2
Input voltage without damage (either input) 30 V Either or both inputs can go to this value without damage 2

CAD (KiCad official)

  • Symbol: LR2903D
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: lr2903d-etched.step / lr2903d-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lr2903d.step / lr2903d.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
lr2903d.step 122 KB You want the bare part, or you mark your own boards.
lr2903d-etched.step 1.8 MB You want the part with LR2903D already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 443 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: LRC datasheet (5 pp, sha256 036bd30c19cea004, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF