component
LR123WF360MT4E
Public Made by Adomby adom
UNI ROYAL Uniroyal Elec Current Sense Resistors / Shunt Resistors, 2512. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLR123WF360MT4E
UNI ROYAL Uniroyal Elec · Current Sense Resistors / Shunt Resistors · 2512
LR123WF360MT4E from UNI ROYAL Uniroyal Elec, in a 2512. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised resistor; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised resistor; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | UNI ROYAL Uniroyal Elec |
| Package | 2512 |
| Category | Resistors |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Resistance range (3W) | 3 | 350 | mΩ | 3W, 3~350mΩ range | 3 | ||
| Resistance tolerance | -1 | 1 | % | F = ±1% (7th code of MPN) | 2 | ||
| Temperature coefficient of resistance | -50 | 50 | ppm/℃ | R2-R1/(R1(t2-t1))×10^6; t1 +25°C, t2 125°C | 4 | ||
| Rated power | 3 | W | 3W variant, continuous load at 70℃ ambient | 3 | |||
| Short-time overload resistance change | ΔR | -0.5 | 0.5 | % | 4 times rated power (LR12-3W), 5 seconds | 4 | |
| Load life resistance change | ΔR | -1 | 1 | % | 1000 hours at rated or max working current (whichever less), 1.5 h ON / 0.5 h OFF, 70±2°C ambient | 4 | |
| High temperature exposure resistance change | ΔR | -1 | 1 | % | 155±2°C for 1000 h (MIL-STD-202 108A) | 4 | |
| Biased humidity resistance change | ΔR | -0.5 | 0.5 | % | 1000 hours 85°C/85%RH, 10% of operating power; measured at 24±4 h after test | 4 | |
| Rapid change of temperature resistance change | ΔR | -0.5 | 0.5 | % | 30 min at -55°C and 30 min at 155°C; 100 cycles | 4 | |
| Terminal bending resistance change | ΔR | -0.5 | 0.5 | % | 2 mm, 10 s | 4 | |
| Resistance to solder heat resistance change | ΔR | -0.5 | 0.5 | % | 260±5°C, held 10±1 seconds | 4 | |
| Solderability coverage | 95 | % | Solder temperature 245±3°C; dwell 2~3 seconds | 4 | |||
| Limit surge current (dielectric withstanding) | 50 | mA | 500 VAC applied for 1 minute | 4 | |||
| Recommended storage temperature | 15 | 35 | ℃ | Warehouse storage recommendation | 6 | ||
| Recommended storage humidity | 25 | 75 | %RH | Warehouse storage recommendation | 6 | ||
| Preheat temperature (Ts) | Ts | 150 | 200 | ℃ | Lead-free reflow preheat, Tsmin to Tsmax | 5 | |
| Preheat time (ts) | ts | 60 | 120 | seconds | Tsmin to Tsmax | 5 | |
| Time maintained above TL (tL) | tL | 60 | 150 | seconds | Above TL = 217℃ | 5 | |
| Average ramp-up rate | 3 | ℃/second | Ts max to Tp | 5 | |||
| Ramp-down rate | 6 | ℃/second | Peak to cooling | 5 | |||
| Time 25℃ to peak temperature | 8 | minutes | 25℃ to peak temperature | 5 | |||
| Allowed reflow times | 2 | times | Reflow soldering | 5 | |||
| Rated ambient temperature (full power) | 70 | ℃ | Full rated power basis; derate above 70℃ per Figure 1 | 4 | |||
| Peak temperature (Tp) | Tp | 260 | ℃ | Lead-free reflow peak | 5 | ||
| Temperature maintained above TL | TL | 217 | ℃ | Lead-free reflow threshold | 5 | ||
| Time within peak temperature (tp) | tp | 10 | seconds | Within +0/−5 ℃ of actual peak temperature | 5 |
CAD (KiCad official)
- Symbol:
LR123WF360MT4E - Footprint:
Resistor_SMD:R_2512_6332Metric - 3D model: 2512 (KiCad packages3D, STEP)
- 3D model files:
lr123wf360mt4e-etched.step/lr123wf360mt4e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lr123wf360mt4e.step/lr123wf360mt4e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: UNI ROYAL Uniroyal Elec datasheet (6 pp, sha256
697e24f2047069dc, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).