component
LQW18ANR20J0ZD
Public Made by Adomby adom
Murata Electronics Inductors (SMD), 0603. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
main
LQW18ANR20J0ZD
Murata Electronics · Inductors (SMD) · 0603
LQW18ANR20J0ZD from Murata Electronics, in a 0603. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised inductor or ferrite bead; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised inductor or ferrite bead; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Murata Electronics |
| Package | 0603 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Inductance tolerance (code J, ±5%) | -5 | 5 | % | Tolerance code J, decoded from part-numbering table | 1 | ||
| Q (min.) | Q | 25 | Measured at 100 MHz (180 nH to 470 nH band, 7.1) | 3 | |||
| DC resistance (max.) | DCR | 2.4 | Ω | Digital multimeter (7.3) | 3 | ||
| Self-resonant frequency (min.) | SRF | 1250 | MHz | Keysight N5230A or equivalent (7.4) | 3 | ||
| Rated current | Irated | 120 | mA | Do not use in excess of rated current (10.2) | 3 | ||
| Inductance change rate at rated current | ΔL/L | -10 | 10 | % | Rated current applied (7.5) | 5 | |
| Product temperature rise at rated current | ΔT | 20 | °C | Rated current applied (7.5) | 5 | ||
| Operating temperature range | Top | -55 | 125 | °C | 1 | ||
| Storage temperature range | Tstg | -55 | 125 | °C | 1 | ||
| Inductance change after AEC-Q200 stress tests (Table A) | ΔL/L | -5 | 5 | % | Table A, after AEC-Q200 tests; measured at 100 MHz | 5 | |
| DC resistance change after board flex (Table B) | ΔDCR/DCR | -10 | 10 | % | Table B, after board flex test | 5 | |
| Peak temperature, standard reflow profile | Tpeak | -3 | 245 | 3 | °C | Standard profile, reflow, 2 cycles | 8 |
| Peak temperature, limit reflow profile | Tpeak | 260 | °C | Limit profile, 10 s, 2 reflow cycles | 8 | ||
| Pre-heating temperature difference, solder to product surface | ΔT | 150 | °C | Pre-heating during reflow | 8 | ||
| Cooling temperature difference after soldering | ΔT | 100 | °C | Cooling into solvent after soldering | 8 | ||
| Soldering iron tip temperature (rework) | 350 | °C | Rework with soldering iron, max 2 operations, soldering time 3 s | 9 | |||
| Inductance (nominal value) | L | 200 | nH | Nominal value for LQW18ANR20J0ZD (printed 200 nH) | 3 |
CAD (KiCad official)
- Symbol:
LQW18ANR20J0ZD - Footprint:
Inductor_SMD:L_0603_1608Metric - 3D model: 0603 (KiCad packages3D, STEP)
- 3D model files:
lqw18anr20j0zd-etched.step/lqw18anr20j0zd-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lqw18anr20j0zd.step/lqw18anr20j0zd.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Murata Electronics datasheet (12 pp, sha256
ffe77639164fd9aa, retrieved 2026-11-02, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LQW18ANR20J0ZD
**Murata Electronics** · Inductors (SMD) · 0603
LQW18ANR20J0ZD from Murata Electronics, in a 0603. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised inductor or ferrite bead; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised inductor or ferrite bead; either orientation. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Murata Electronics |
| Package | 0603 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Inductance tolerance (code J, ±5%) | | -5 | | 5 | % | Tolerance code J, decoded from part-numbering table | 1 |
| Q (min.) | Q | 25 | | | | Measured at 100 MHz (180 nH to 470 nH band, 7.1) | 3 |
| DC resistance (max.) | DCR | | | 2.4 | Ω | Digital multimeter (7.3) | 3 |
| Self-resonant frequency (min.) | SRF | 1250 | | | MHz | Keysight N5230A or equivalent (7.4) | 3 |
| Rated current | Irated | | | 120 | mA | Do not use in excess of rated current (10.2) | 3 |
| Inductance change rate at rated current | ΔL/L | -10 | | 10 | % | Rated current applied (7.5) | 5 |
| Product temperature rise at rated current | ΔT | | | 20 | °C | Rated current applied (7.5) | 5 |
| Operating temperature range | Top | -55 | | 125 | °C | | 1 |
| Storage temperature range | Tstg | -55 | | 125 | °C | | 1 |
| Inductance change after AEC-Q200 stress tests (Table A) | ΔL/L | -5 | | 5 | % | Table A, after AEC-Q200 tests; measured at 100 MHz | 5 |
| DC resistance change after board flex (Table B) | ΔDCR/DCR | -10 | | 10 | % | Table B, after board flex test | 5 |
| Peak temperature, standard reflow profile | Tpeak | -3 | 245 | 3 | °C | Standard profile, reflow, 2 cycles | 8 |
| Peak temperature, limit reflow profile | Tpeak | | | 260 | °C | Limit profile, 10 s, 2 reflow cycles | 8 |
| Pre-heating temperature difference, solder to product surface | ΔT | | | 150 | °C | Pre-heating during reflow | 8 |
| Cooling temperature difference after soldering | ΔT | | | 100 | °C | Cooling into solvent after soldering | 8 |
| Soldering iron tip temperature (rework) | | | | 350 | °C | Rework with soldering iron, max 2 operations, soldering time 3 s | 9 |
| Inductance (nominal value) | L | | 200 | | nH | Nominal value for LQW18ANR20J0ZD (printed 200 nH) | 3 |
## CAD (KiCad official)
- Symbol: `LQW18ANR20J0ZD`
- Footprint: `Inductor_SMD:L_0603_1608Metric`
- 3D model: 0603 (KiCad packages3D, STEP)
- 3D model files: `lqw18anr20j0zd-etched.step` / `lqw18anr20j0zd-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lqw18anr20j0zd.step` / `lqw18anr20j0zd.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Murata Electronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8723151847994966016) (12 pp, sha256 `ffe77639164fd9aa`, retrieved 2026-11-02, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins`, primary `two-terminal convention` (convention), consensus `off` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lqw18anr20j0zd-datasheet.pdf)