main
Ray
Publish 0.1.0
a2d2971
LQW18AN82NG80D
Murata Electronics · Power Inductors · 0603
LQW18AN82NG80D from Murata Electronics, in a 0603. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | One electrode of the 82 nH ±2% chip coil (rated current 550 mA, DC resistance 0.5 Ω max, SRF 2230 MHz min). |
| 2 | 2 | passive | Second electrode of the 82 nH ±2% chip coil; the coil is not polarized, so the two electrodes are interchangeable (operating range -55°C to +125°C). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Murata Electronics |
| Package | 0603 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC resistance | DCR | 0.5 | Ω | Measuring equipment: digital multimeter | 3 | ||
| Self-resonant frequency | SRF | 2230 | MHz | Measuring equipment: Keysight N5230A or the equivalent | 3 | ||
| Q (Min.) | Q | 34 | 3 | ||||
| Nominal inductance | L | 82 | nH | 3 | |||
| Inductance tolerance | L tol | -2 | 2 | % | Tolerance code G (±2%); measured at 150 MHz for 72 nH to 150 nH, approx. 0 dBm | 5 | |
| Operating temperature range | Top | -55 | 125 | °C | 1 | ||
| Storage temperature range | Tstg | -55 | 125 | °C | 1 | ||
| Inductance change rate after resistance to soldering heat | ΔL/L | -5 | 5 | % | Solder temperature 270°C±5°C, immersion 10 s±1 s, then 24 h room condition | 6 | |
| Inductance change rate after heat resistance test | ΔL/L | -5 | 5 | % | Temperature 125°C±2°C, test time 1000 h (+48 h, -0 h) | 6 | |
| Q change rate after heat resistance test | ΔQ/Q | -20 | 20 | % | Temperature 125°C±2°C, test time 1000 h (+48 h, -0 h) | 6 | |
| Inductance change rate after cold resistance test | ΔL/L | -5 | 5 | % | Temperature -55°C±2°C, test time 1000 h (+48 h, -0 h) | 7 | |
| Q change rate after cold resistance test | ΔQ/Q | -20 | 20 | % | Temperature -55°C±2°C, test time 1000 h (+48 h, -0 h) | 7 | |
| Inductance change rate after humidity test | ΔL/L | -5 | 5 | % | Temperature 40°C±2°C, humidity 90% to 95% RH, test time 1000 h (+48 h, -0 h) | 7 | |
| Q change rate after humidity test | ΔQ/Q | -20 | 20 | % | Temperature 40°C±2°C, humidity 90% to 95% RH, test time 1000 h (+48 h, -0 h) | 7 | |
| Inductance change rate after temperature cycle | ΔL/L | -5 | 5 | % | -55°C/30 min to +125°C/30 min, 10 cycles | 7 | |
| Q change rate after temperature cycle | ΔQ/Q | -20 | 20 | % | -55°C/30 min to +125°C/30 min, 10 cycles | 7 | |
| Reflow peak temperature limit profile | Tpeak | 260 | °C | Limit profile: 260°C/10 s, 2 reflow cycles | 9 |
CAD (KiCad official)
- Symbol:
LQW18AN82NG80D - Footprint:
Inductor_SMD:L_0603_1608Metric - 3D model: 0603 (KiCad packages3D, STEP)
- 3D model files:
lqw18an82ng80d-etched.step/lqw18an82ng80d-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lqw18an82ng80d.step/lqw18an82ng80d.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Murata Electronics datasheet (13 pp, sha256
954c74ab4f67e9b4, retrieved 2026-11-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LQW18AN82NG80D
**Murata Electronics** · Power Inductors · 0603
LQW18AN82NG80D from Murata Electronics, in a 0603. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | One electrode of the 82 nH ±2% chip coil (rated current 550 mA, DC resistance 0.5 Ω max, SRF 2230 MHz min). |
| 2 | 2 | passive | Second electrode of the 82 nH ±2% chip coil; the coil is not polarized, so the two electrodes are interchangeable (operating range -55°C to +125°C). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Murata Electronics |
| Package | 0603 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC resistance | DCR | | | 0.5 | Ω | Measuring equipment: digital multimeter | 3 |
| Self-resonant frequency | SRF | 2230 | | | MHz | Measuring equipment: Keysight N5230A or the equivalent | 3 |
| Q (Min.) | Q | 34 | | | | | 3 |
| Nominal inductance | L | | 82 | | nH | | 3 |
| Inductance tolerance | L tol | -2 | | 2 | % | Tolerance code G (±2%); measured at 150 MHz for 72 nH to 150 nH, approx. 0 dBm | 5 |
| Operating temperature range | Top | -55 | | 125 | °C | | 1 |
| Storage temperature range | Tstg | -55 | | 125 | °C | | 1 |
| Inductance change rate after resistance to soldering heat | ΔL/L | -5 | | 5 | % | Solder temperature 270°C±5°C, immersion 10 s±1 s, then 24 h room condition | 6 |
| Inductance change rate after heat resistance test | ΔL/L | -5 | | 5 | % | Temperature 125°C±2°C, test time 1000 h (+48 h, -0 h) | 6 |
| Q change rate after heat resistance test | ΔQ/Q | -20 | | 20 | % | Temperature 125°C±2°C, test time 1000 h (+48 h, -0 h) | 6 |
| Inductance change rate after cold resistance test | ΔL/L | -5 | | 5 | % | Temperature -55°C±2°C, test time 1000 h (+48 h, -0 h) | 7 |
| Q change rate after cold resistance test | ΔQ/Q | -20 | | 20 | % | Temperature -55°C±2°C, test time 1000 h (+48 h, -0 h) | 7 |
| Inductance change rate after humidity test | ΔL/L | -5 | | 5 | % | Temperature 40°C±2°C, humidity 90% to 95% RH, test time 1000 h (+48 h, -0 h) | 7 |
| Q change rate after humidity test | ΔQ/Q | -20 | | 20 | % | Temperature 40°C±2°C, humidity 90% to 95% RH, test time 1000 h (+48 h, -0 h) | 7 |
| Inductance change rate after temperature cycle | ΔL/L | -5 | | 5 | % | -55°C/30 min to +125°C/30 min, 10 cycles | 7 |
| Q change rate after temperature cycle | ΔQ/Q | -20 | | 20 | % | -55°C/30 min to +125°C/30 min, 10 cycles | 7 |
| Reflow peak temperature limit profile | Tpeak | | | 260 | °C | Limit profile: 260°C/10 s, 2 reflow cycles | 9 |
## CAD (KiCad official)
- Symbol: `LQW18AN82NG80D`
- Footprint: `Inductor_SMD:L_0603_1608Metric`
- 3D model: 0603 (KiCad packages3D, STEP)
- 3D model files: `lqw18an82ng80d-etched.step` / `lqw18an82ng80d-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lqw18an82ng80d.step` / `lqw18an82ng80d.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Murata Electronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589945455393480704) (13 pp, sha256 `954c74ab4f67e9b4`, retrieved 2026-11-07, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lqw18an82ng80d-datasheet.pdf)