main
Ray
Publish 0.1.0
a59577a
LQW15AN7N6G80D
Murata Electronics · Power Inductors · 0402
LQW15AN7N6G80D from Murata Electronics, in a 0402. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | First electrode of the 7.6 nH ±2% wire-wound chip inductor (Q 30 min, DC resistance 0.050 Ω max, SRF 7.0 GHz min, rated current 1700 mA); the part is not polarized, so either electrode can be terminal 1. |
| 2 | 2 | passive | Second electrode of the 7.6 nH ±2% wire-wound chip inductor, mounted on the recommended land pattern (a 0.6 mm, b 1.42 mm, c 0.66 mm) for reflow soldering only. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Murata Electronics |
| Package | 0402 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Inductance tolerance (code G) | -2 | 2 | % | Part LQW15AN7N6G80D, tolerance G: ±2% | 5 | ||
| Q (Min.) | Q | 30 | Measured at 250 MHz | 5 | |||
| DC resistance | 0.05 | Ω | Measured with digital multimeter | 5 | |||
| Self-resonant frequency (min) | 7 | GHz | Measured with Keysight N5230 or equivalent | 5 | |||
| Rated current | 1700 | mA | Product temperature rise 40°C max; rated current derated vs. operating temperature (footnote *1) | 5 | |||
| Operating temperature range | -55 | 125 | °C | 1 | |||
| Storage temperature range | -55 | 125 | °C | 1 | |||
| Inductance change rate, resistance to soldering heat | -5 | 5 | % | Solder 270°C±5°C, immersion 10 s±1 s; post-treatment 24 h at room condition | 9 | ||
| Inductance change rate, heat resistance | -5 | 5 | % | 125°C±2°C, 1000 h (+48 h, -0 h) | 10 | ||
| Q change rate, heat resistance | -20 | 20 | % | 125°C±2°C, 1000 h (+48 h, -0 h) | 10 | ||
| Inductance change rate, cold resistance | -5 | 5 | % | -55°C±2°C, 1000 h (+48 h, -0 h) | 10 | ||
| Q change rate, cold resistance | -20 | 20 | % | -55°C±2°C, 1000 h (+48 h, -0 h) | 10 | ||
| Inductance change rate, humidity | -5 | 5 | % | 70°C±2°C, 90% to 95% RH, 1000 h (+48 h, -0 h) | 10 | ||
| Q change rate, humidity | -20 | 20 | % | 70°C±2°C, 90% to 95% RH, 1000 h (+48 h, -0 h) | 10 | ||
| Inductance change rate, temperature cycle | -5 | 5 | % | 10 cycles, -55°C to +125°C | 10 | ||
| Q change rate, temperature cycle | -20 | 20 | % | 10 cycles, -55°C to +125°C | 10 | ||
| Nominal inductance | 7.6 | nH | Measured at 100 MHz (applies to 1.3 nH to 43 nH) | 5 |
CAD (KiCad official)
- Symbol:
LQW15AN7N6G80D - Footprint:
Inductor_SMD:L_0402_1005Metric - 3D model: 0402 (KiCad packages3D, STEP)
- 3D model files:
lqw15an7n6g80d-etched.step/lqw15an7n6g80d-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lqw15an7n6g80d.step/lqw15an7n6g80d.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Murata Electronics datasheet (15 pp, sha256
66630cacd167423e, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LQW15AN7N6G80D
**Murata Electronics** · Power Inductors · 0402
LQW15AN7N6G80D from Murata Electronics, in a 0402. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | First electrode of the 7.6 nH ±2% wire-wound chip inductor (Q 30 min, DC resistance 0.050 Ω max, SRF 7.0 GHz min, rated current 1700 mA); the part is not polarized, so either electrode can be terminal 1. |
| 2 | 2 | passive | Second electrode of the 7.6 nH ±2% wire-wound chip inductor, mounted on the recommended land pattern (a 0.6 mm, b 1.42 mm, c 0.66 mm) for reflow soldering only. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Murata Electronics |
| Package | 0402 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Inductance tolerance (code G) | | -2 | | 2 | % | Part LQW15AN7N6G80D, tolerance G: ±2% | 5 |
| Q (Min.) | Q | 30 | | | | Measured at 250 MHz | 5 |
| DC resistance | | | | 0.05 | Ω | Measured with digital multimeter | 5 |
| Self-resonant frequency (min) | | 7 | | | GHz | Measured with Keysight N5230 or equivalent | 5 |
| Rated current | | | | 1700 | mA | Product temperature rise 40°C max; rated current derated vs. operating temperature (footnote *1) | 5 |
| Operating temperature range | | -55 | | 125 | °C | | 1 |
| Storage temperature range | | -55 | | 125 | °C | | 1 |
| Inductance change rate, resistance to soldering heat | | -5 | | 5 | % | Solder 270°C±5°C, immersion 10 s±1 s; post-treatment 24 h at room condition | 9 |
| Inductance change rate, heat resistance | | -5 | | 5 | % | 125°C±2°C, 1000 h (+48 h, -0 h) | 10 |
| Q change rate, heat resistance | | -20 | | 20 | % | 125°C±2°C, 1000 h (+48 h, -0 h) | 10 |
| Inductance change rate, cold resistance | | -5 | | 5 | % | -55°C±2°C, 1000 h (+48 h, -0 h) | 10 |
| Q change rate, cold resistance | | -20 | | 20 | % | -55°C±2°C, 1000 h (+48 h, -0 h) | 10 |
| Inductance change rate, humidity | | -5 | | 5 | % | 70°C±2°C, 90% to 95% RH, 1000 h (+48 h, -0 h) | 10 |
| Q change rate, humidity | | -20 | | 20 | % | 70°C±2°C, 90% to 95% RH, 1000 h (+48 h, -0 h) | 10 |
| Inductance change rate, temperature cycle | | -5 | | 5 | % | 10 cycles, -55°C to +125°C | 10 |
| Q change rate, temperature cycle | | -20 | | 20 | % | 10 cycles, -55°C to +125°C | 10 |
| Nominal inductance | | | 7.6 | | nH | Measured at 100 MHz (applies to 1.3 nH to 43 nH) | 5 |
## CAD (KiCad official)
- Symbol: `LQW15AN7N6G80D`
- Footprint: `Inductor_SMD:L_0402_1005Metric`
- 3D model: 0402 (KiCad packages3D, STEP)
- 3D model files: `lqw15an7n6g80d-etched.step` / `lqw15an7n6g80d-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lqw15an7n6g80d.step` / `lqw15an7n6g80d.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Murata Electronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589943004967567360) (15 pp, sha256 `66630cacd167423e`, retrieved 2026-10-23, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lqw15an7n6g80d-datasheet.pdf)