main
Ray
Publish 0.1.0
2e0123b
LQW15AN6N2G80D
Murata Electronics · Power Inductors · 0402
LQW15AN6N2G80D from Murata Electronics, in a 0402. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Terminal 1 | passive | One end electrode of the 6.2 nH ±2% wire-wound chip coil (0.2±0.1 mm wide electrode), rated 1600 mA with 0.056 Ω max DC resistance. |
| 2 | Terminal 2 | passive | Other end electrode of the 6.2 nH ±2% wire-wound chip coil (0.2±0.1 mm wide electrode); the coil is non-polarized and the two terminals are interchangeable. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Murata Electronics |
| Package | 0402 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Q (Min.) | Q | 33 | Measured at 250 MHz (1.3 nH to 43 nH) | 4 | |||
| DC resistance | 0.056 | Ω | Measuring equipment: digital multimeter | 4 | |||
| Self-resonant frequency (min.) | 8 | GHz | Measuring equipment: Keysight N5230 or equivalent | 4 | |||
| Rated current | 1600 | mA | Product temperature rise 40°C max.; derating vs. operating temperature per chart (*1) | 4 | |||
| Inductance tolerance (code G) | -2 | 2 | % | Tolerance code G: ±2% | 4 | ||
| Nominal inductance | L | 6.2 | nH | Measuring frequency 100 MHz | 4 | ||
| Inductance change rate after resistance to soldering heat | -5 | 5 | % | Solder 270°C±5°C, immersion 10 s±1 s | 10 | ||
| Inductance change rate after heat resistance | -5 | 5 | % | Temperature 125°C±2°C, test time 1000 h | 10 | ||
| Inductance change rate after cold resistance | -5 | 5 | % | Temperature -55°C±2°C, test time 1000 h | 10 | ||
| Inductance change rate after humidity test | -5 | 5 | % | Temperature 70°C±2°C, humidity 90% to 95% RH, 1000 h | 10 | ||
| Inductance change rate after temperature cycle | -5 | 5 | % | Temperature cycle -55°C to +125°C, 10 cycles | 10 | ||
| Q change rate after heat resistance | -20 | 20 | % | Temperature 125°C±2°C, test time 1000 h | 10 | ||
| Q change rate after cold resistance | -20 | 20 | % | Temperature -55°C±2°C, test time 1000 h | 10 | ||
| Q change rate after humidity test | -20 | 20 | % | Temperature 70°C±2°C, humidity 90% to 95% RH, 1000 h | 10 | ||
| Q change rate after temperature cycle | -20 | 20 | % | Temperature cycle -55°C to +125°C, 10 cycles | 10 | ||
| Operating temperature range | -55 | 125 | °C | 1 | |||
| Storage temperature range | -55 | 125 | °C | Storage temperature range | 1 |
CAD (KiCad official)
- Symbol:
LQW15AN6N2G80D - Footprint:
Inductor_SMD:L_0402_1005Metric - 3D model: 0402 (KiCad packages3D, STEP)
- 3D model files:
lqw15an6n2g80d-etched.step/lqw15an6n2g80d-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lqw15an6n2g80d.step/lqw15an6n2g80d.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Murata Electronics datasheet (16 pp, sha256
d9c4875ed6279339, retrieved 2026-10-25, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LQW15AN6N2G80D
**Murata Electronics** · Power Inductors · 0402
LQW15AN6N2G80D from Murata Electronics, in a 0402. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Terminal 1 | passive | One end electrode of the 6.2 nH ±2% wire-wound chip coil (0.2±0.1 mm wide electrode), rated 1600 mA with 0.056 Ω max DC resistance. |
| 2 | Terminal 2 | passive | Other end electrode of the 6.2 nH ±2% wire-wound chip coil (0.2±0.1 mm wide electrode); the coil is non-polarized and the two terminals are interchangeable. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Murata Electronics |
| Package | 0402 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Q (Min.) | Q | 33 | | | | Measured at 250 MHz (1.3 nH to 43 nH) | 4 |
| DC resistance | | | | 0.056 | Ω | Measuring equipment: digital multimeter | 4 |
| Self-resonant frequency (min.) | | 8 | | | GHz | Measuring equipment: Keysight N5230 or equivalent | 4 |
| Rated current | | | | 1600 | mA | Product temperature rise 40°C max.; derating vs. operating temperature per chart (*1) | 4 |
| Inductance tolerance (code G) | | -2 | | 2 | % | Tolerance code G: ±2% | 4 |
| Nominal inductance | L | | 6.2 | | nH | Measuring frequency 100 MHz | 4 |
| Inductance change rate after resistance to soldering heat | | -5 | | 5 | % | Solder 270°C±5°C, immersion 10 s±1 s | 10 |
| Inductance change rate after heat resistance | | -5 | | 5 | % | Temperature 125°C±2°C, test time 1000 h | 10 |
| Inductance change rate after cold resistance | | -5 | | 5 | % | Temperature -55°C±2°C, test time 1000 h | 10 |
| Inductance change rate after humidity test | | -5 | | 5 | % | Temperature 70°C±2°C, humidity 90% to 95% RH, 1000 h | 10 |
| Inductance change rate after temperature cycle | | -5 | | 5 | % | Temperature cycle -55°C to +125°C, 10 cycles | 10 |
| Q change rate after heat resistance | | -20 | | 20 | % | Temperature 125°C±2°C, test time 1000 h | 10 |
| Q change rate after cold resistance | | -20 | | 20 | % | Temperature -55°C±2°C, test time 1000 h | 10 |
| Q change rate after humidity test | | -20 | | 20 | % | Temperature 70°C±2°C, humidity 90% to 95% RH, 1000 h | 10 |
| Q change rate after temperature cycle | | -20 | | 20 | % | Temperature cycle -55°C to +125°C, 10 cycles | 10 |
| Operating temperature range | | -55 | | 125 | °C | | 1 |
| Storage temperature range | | -55 | | 125 | °C | Storage temperature range | 1 |
## CAD (KiCad official)
- Symbol: `LQW15AN6N2G80D`
- Footprint: `Inductor_SMD:L_0402_1005Metric`
- 3D model: 0402 (KiCad packages3D, STEP)
- 3D model files: `lqw15an6n2g80d-etched.step` / `lqw15an6n2g80d-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lqw15an6n2g80d.step` / `lqw15an6n2g80d.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Murata Electronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8602592629612040192) (16 pp, sha256 `d9c4875ed6279339`, retrieved 2026-10-25, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lqw15an6n2g80d-datasheet.pdf)