Made with kicad-footprint-generator 10.0 · KiCad file format 20260206
LQW15AN3N7B80D
Murata Electronics · Power Inductors · 0402
LQW15AN3N7B80D from Murata Electronics, in a 0402. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised inductor or ferrite bead; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised inductor or ferrite bead; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Murata Electronics |
| Package | 0402 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Inductance tolerance (B: ±0.1 nH) | -0.1 | 0.1 | nH | 2 | |||
| Q (min.) | Q | 35 | Measured at 250 MHz (1.3 nH to 43 nH, section 7.1) | 2 | |||
| DC resistance (max.) | DCR | 0.03 | Ω | 2 | |||
| Self-resonant frequency (min.) | SRF | 10 | GHz | 2 | |||
| Rated current (max.) | 1950 | mA | Derated with operating temperature (note *1) | 2 | |||
| Inductance change rate after heat resistance (max.) | -5 | 5 | % | Temperature 125°C±2°C, test time 1000 h (+48 h, -0 h) | 10 | ||
| Q change rate after heat resistance (max.) | -20 | 20 | % | Temperature 125°C±2°C, test time 1000 h (+48 h, -0 h) | 10 | ||
| Inductance change rate after cold resistance (max.) | -5 | 5 | % | Temperature -55°C±2°C, test time 1000 h (+48 h, -0 h) | 10 | ||
| Q change rate after cold resistance (max.) | -20 | 20 | % | Temperature -55°C±2°C, test time 1000 h (+48 h, -0 h) | 10 | ||
| Inductance change rate after humidity test (max.) | -5 | 5 | % | Temperature 70°C±2°C, humidity 90% (RH) to 95% (RH), test time 1000 h (+48 h, -0 h) | 10 | ||
| Q change rate after humidity test (max.) | -20 | 20 | % | Temperature 70°C±2°C, humidity 90% (RH) to 95% (RH), test time 1000 h (+48 h, -0 h) | 10 | ||
| Inductance change rate after temperature cycle (max.) | -5 | 5 | % | 10 cycles; step 1 -55°C±2°C/30 min±3 min, step 3 +125°C±2°C/30 min±3 min | 10 | ||
| Q change rate after temperature cycle (max.) | -20 | 20 | % | 10 cycles; step 1 -55°C±2°C/30 min±3 min, step 3 +125°C±2°C/30 min±3 min | 10 | ||
| Inductance change rate after resistance to soldering heat (max.) | -5 | 5 | % | Solder temperature 270°C±5°C, immersion time 10 s±1 s | 9 | ||
| Operating temperature range | -55 | 125 | °C | Operating temperature range; rated current derated per note *1 | 1 | ||
| Storage temperature range | -55 | 125 | °C | Storage temperature range | 1 | ||
| Recommended storage temperature range | -10 | 40 | °C | Recommended storage conditions (section 12.9); recommended relative humidity 15% to 85% | 14 | ||
| Peak reflow temperature (limit profile) | 260 | °C | Limit soldering profile: 260°C/10 s, 2 reflow cycles | 12 |
CAD (KiCad official)
- Symbol:
LQW15AN3N7B80D - Footprint:
Inductor_SMD:L_0402_1005Metric - 3D model: 0402 (KiCad packages3D, STEP)
- 3D model files:
lqw15an3n7b80d-etched.step/lqw15an3n7b80d-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lqw15an3n7b80d.step/lqw15an3n7b80d.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Murata Electronics datasheet (15 pp, sha256
66630cacd167423e, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).