main
Ray Publish 0.1.0 deb8fc0

LQP03TN2N0BZ2D

Murata Electronics · Inductors (SMD) · 0201

LQP03TN2N0BZ2D from Murata Electronics, in a 0201. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1 passive Terminal 1 of an unpolarised inductor or ferrite bead; either orientation.
2 2 passive Terminal 2 of an unpolarised inductor or ferrite bead; either orientation.

Key specifications

Parameter Value
Manufacturer Murata Electronics
Package 0201
Category Inductors, Coils, Chokes
Pins 2

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Inductance tolerance (B: ±0.1 nH) -0.1 0.1 nH Measured at 500 MHz (0.6 nH to 30 nH), per section 7.1 2
Q (Min.) Q 14 2
DC resistance 0.15 Ω Digital multimeter (section 7.3) 2
Self-resonant frequency (lower limit / typical) 12500 14800 MHz Keysight N5230A (section 7.4); typical value is actual performance 2
Nominal inductance 2 nH Measured at 500 MHz (section 7.1) 2
Operating temperature range -55 125 °C Operating temperature range 1
Storage temperature range -55 125 °C Storage temperature range 1
Inductance change rate after high temperature exposure -10 10 % 1000 h at 125°C, 24 h room condition before measurement; Table A: 2.0 nH measured at 500 MHz (0.6 nH to 30 nH) 6
Inductance change rate after temperature cycling -10 10 % 1000 cycles, -40°C to +125°C, 24 h room condition before measurement; Table A: 500 MHz measurement 6
Inductance change rate after biased humidity -10 10 % 1000 h at 85°C, 85% RH, unpowered, 24 h room condition before measurement; Table A: 500 MHz measurement 6
Inductance change rate after operational life -10 10 % Apply 125°C 1000 h, 24 h room condition before measurement; Table A: 500 MHz measurement 6
DC resistance change rate after board flex -10 10 % Board flex, epoxy PCB 1.6 mm, deflection 2 mm min.; Table B; Murata deviation: FR-4 0.8 mm, holding 30 s 6

CAD (KiCad official)

  • Symbol: LQP03TN2N0BZ2D
  • Footprint: Inductor_SMD:L_0201_0603Metric
  • 3D model: 0201 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Murata Electronics datasheet (14 pp, sha256 abbc19ed241cb8cb, retrieved 2026-10-17, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins, primary two-terminal convention (convention), consensus off (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF