main
Ray
Publish 0.1.0
a61aa0a
LQP03TG1N2B02D
Murata Electronics · Inductors (SMD) · 0201
LQP03TG1N2B02D from Murata Electronics, in a 0201. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised inductor or ferrite bead; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised inductor or ferrite bead; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Murata Electronics |
| Package | 0201 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Inductance tolerance (code B) | -0.1 | 0.1 | nH | Tolerance code B: ±0.1 nH | 1 | ||
| Q (min) | Q | 13 | 1 | ||||
| DC Resistance | DCR | 0.15 | Ω | 1 | |||
| Self Resonant Frequency (SRF) | SRF | 15000 | 18100 | MHz | 1 | ||
| Rated Current | 600 | mA | Self temperature rise limited to 25°C max with rated current applied (section 7.5) | 1 | |||
| Self temperature rise at rated current | 25 | °C | Rated current applied | 5 | |||
| Operating temperature range | -55 | 125 | °C | Ambient temperature; rated current can be handled in this range | 1 | ||
| Storage temperature range | -55 | 125 | °C | Storage temperature range as printed in Rating section | 1 | ||
| Storage temperature (warehouse) | -10 | 40 | °C | Recommended warehouse storage conditions | 11 | ||
| Storage humidity (warehouse) | 15 | 85 | %RH | No rapid change in temperature and humidity | 11 | ||
| Inductance change after vibration | -10 | 10 | % | After vibration 10-2000 Hz, 2 h in each of 3 directions | 6 | ||
| Inductance change after resistance to soldering heat | -10 | 10 | % | Solder 260°C±5°C, immersion 5 s±1 s; measured after 24 h room condition | 6 | ||
| Inductance change after heat resistance | -10 | 10 | % | 125°C, 1000 h (+48h,-0h) | 7 | ||
| Soldering iron tip temperature | 350 | °C | Rework with soldering iron: pre-heat 150°C 1 min, soldering time 3(+1,-0) s, 2 times | 10 | |||
| Soldering iron output | 80 | W | Rework with soldering iron; tip diameter φ3 mm max | 10 | |||
| Reflow peak temperature (limit profile) | 260 | °C | Limit reflow profile, 10 s; 2 reflow cycles | 9 | |||
| Inductance | L | 1.2 | nH | Measured at 500 MHz, test signal level about 0 dBm (section 7.1) | 1 | ||
| Reflow peak temperature (standard profile) | 245 | °C | Standard reflow profile, tolerance ±3 °C | 9 |
CAD (KiCad official)
- Symbol:
LQP03TG1N2B02D - Footprint:
Inductor_SMD:L_0201_0603Metric - 3D model: 0201 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Murata Electronics datasheet (12 pp, sha256
a44c6cc1c5c095a7, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LQP03TG1N2B02D
**Murata Electronics** · Inductors (SMD) · 0201
LQP03TG1N2B02D from Murata Electronics, in a 0201. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised inductor or ferrite bead; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised inductor or ferrite bead; either orientation. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Murata Electronics |
| Package | 0201 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Inductance tolerance (code B) | | -0.1 | | 0.1 | nH | Tolerance code B: ±0.1 nH | 1 |
| Q (min) | Q | 13 | | | | | 1 |
| DC Resistance | DCR | | | 0.15 | Ω | | 1 |
| Self Resonant Frequency (SRF) | SRF | 15000 | 18100 | | MHz | | 1 |
| Rated Current | | | | 600 | mA | Self temperature rise limited to 25°C max with rated current applied (section 7.5) | 1 |
| Self temperature rise at rated current | | | | 25 | °C | Rated current applied | 5 |
| Operating temperature range | | -55 | | 125 | °C | Ambient temperature; rated current can be handled in this range | 1 |
| Storage temperature range | | -55 | | 125 | °C | Storage temperature range as printed in Rating section | 1 |
| Storage temperature (warehouse) | | -10 | | 40 | °C | Recommended warehouse storage conditions | 11 |
| Storage humidity (warehouse) | | 15 | | 85 | %RH | No rapid change in temperature and humidity | 11 |
| Inductance change after vibration | | -10 | | 10 | % | After vibration 10-2000 Hz, 2 h in each of 3 directions | 6 |
| Inductance change after resistance to soldering heat | | -10 | | 10 | % | Solder 260°C±5°C, immersion 5 s±1 s; measured after 24 h room condition | 6 |
| Inductance change after heat resistance | | -10 | | 10 | % | 125°C, 1000 h (+48h,-0h) | 7 |
| Soldering iron tip temperature | | | | 350 | °C | Rework with soldering iron: pre-heat 150°C 1 min, soldering time 3(+1,-0) s, 2 times | 10 |
| Soldering iron output | | | | 80 | W | Rework with soldering iron; tip diameter φ3 mm max | 10 |
| Reflow peak temperature (limit profile) | | | | 260 | °C | Limit reflow profile, 10 s; 2 reflow cycles | 9 |
| Inductance | L | | 1.2 | | nH | Measured at 500 MHz, test signal level about 0 dBm (section 7.1) | 1 |
| Reflow peak temperature (standard profile) | | | 245 | | °C | Standard reflow profile, tolerance ±3 °C | 9 |
## CAD (KiCad official)
- Symbol: `LQP03TG1N2B02D`
- Footprint: `Inductor_SMD:L_0201_0603Metric`
- 3D model: 0201 (KiCad packages3D, STEP)
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Murata Electronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589041585669070848) (12 pp, sha256 `a44c6cc1c5c095a7`, retrieved 2026-10-17, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins`, primary `two-terminal convention` (convention), consensus `off` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lqp03tg1n2b02d-datasheet.pdf)