component
LQP03HQ6N2J02D
Public Made by Adomby adom
Murata Electronics Inductors (SMD), 0201. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLQP03HQ6N2J02D
Murata Electronics · Inductors (SMD) · 0201
LQP03HQ6N2J02D from Murata Electronics, in a 0201. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | First terminal electrode of the 6.2 nH ±5% chip inductor (non-polar, interchangeable with the other terminal), rated current 400 mA and DC resistance 0.25 Ω max. |
| 2 | 2 | passive | Second terminal electrode of the 6.2 nH ±5% chip inductor (non-polar, interchangeable with the other terminal), rated current 400 mA and DC resistance 0.25 Ω max. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Murata Electronics |
| Package | 0201 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Inductance tolerance (J) | -5 | 5 | % | Suffix J: ±5%; measured at 500 MHz (0.5 nH to 30 nH), Keysight E4991A (7.1) | 4 | ||
| Q (Min.) | Q | 20 | Keysight 16197A fixture (7.2) | 4 | |||
| DC resistance | 0.25 | Ω | Digital multimeter (7.3) | 4 | |||
| Self-resonant frequency (lower limit) | 5500 | 7700 | MHz | Keysight N5230A or equivalent (7.4); typical value is actual performance | 4 | ||
| Rated current | 400 | mA | Product temperature rise 25°C max when rated current applied (7.5) | 4 | |||
| Product temperature rise at rated current | 25 | °C | Apply rated current from chapter 3 (7.5) | 7 | |||
| Inductance change rate - vibration | -10 | 10 | % | Vibration 10 Hz to 2000 Hz, 6 h total in 3 directions (8.3) | 7 | ||
| Inductance change rate - resistance to soldering heat | -10 | 10 | % | Solder 260°C±5°C, immersion 5 s±1 s (8.5) | 8 | ||
| Inductance change rate - heat resistance | -10 | 10 | % | Temperature 125°C±2°C, test time 1000 h (9.1) | 8 | ||
| Inductance change rate - cold resistance | -10 | 10 | % | Temperature -55°C±3°C, test time 1000 h (9.2) | 8 | ||
| Inductance change rate - humidity | -10 | 10 | % | Temperature 40°C±2°C, humidity 90% to 95% RH, 1000 h (9.3) | 8 | ||
| Inductance change rate - temperature cycle | -10 | 10 | % | -55°C to +125°C, 10 cycles (9.4) | 8 | ||
| Operating temperature range | -55 | 125 | °C | Operating temperature range (chapter 3) | 1 | ||
| Storage temperature range | -55 | 125 | °C | Storage temperature range (chapter 3) | 1 | ||
| Reflow peak temperature (limit profile) | 260 | °C | Limit profile, 10 s (12.3) | 11 | |||
| Reflow cycles | 2 | times | Standard and limit profile (12.3) | 11 | |||
| Soldering iron tip temperature (rework) | 350 | °C | Rework with soldering iron (12.4) | 11 | |||
| Cleaning temperature | 60 | °C | Cleaning (12.8) | 13 | |||
| Cleaning temperature with IPA | 40 | °C | If isopropyl alcohol (IPA) is used (12.8) | 13 | |||
| Nominal inductance | 6.2 | nH | Murata part number LQP03HQ6N2J02D | 4 |
CAD (KiCad official)
- Symbol:
LQP03HQ6N2J02D - Footprint:
Inductor_SMD:L_0201_0603Metric - 3D model: 0201 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Murata Electronics datasheet (15 pp, sha256
8e5788304dd02c4a, retrieved 2026-10-20, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).