component
LQP03HQ3N3B02D
Public Made by Adomby adom
Murata Electronics Inductors (SMD), 0201. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLQP03HQ3N3B02D
Murata Electronics · Inductors (SMD) · 0201
LQP03HQ3N3B02D from Murata Electronics, in a 0201. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal electrode at one end of the 0.6x0.3x0.3 mm chip coil (3.3 nH ±0.1 nH, rated current 500 mA, DC resistance 0.17 ohm max). |
| 2 | 2 | passive | Terminal electrode at the opposite end of the chip coil; the part is non-polarized, with the same 3.3 nH, 500 mA and 0.17 ohm max ratings. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Murata Electronics |
| Package | 0201 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Inductance tolerance (code B, ±0.1 nH) | -0.1 | 0.1 | nH | Part-number tolerance code B | 1 | ||
| Q (min) | Q | 20 | 2 | ||||
| DC resistance | DCR | 0.17 | Ω | 2 | |||
| Rated current | 500 | mA | Rated current applied; self temperature rise limited to 25°C max | 5 | |||
| Inductance (nominal) | L | 3.3 | nH | Measured at 500 MHz (0.5nH-30nH range) | 2 | ||
| Operating temperature range | -55 | 125 | °C | Ambient temperature; rated current can be handled in this range | 1 | ||
| Storage temperature range | -55 | 125 | °C | Storage temperature range (Rating) | 1 | ||
| Inductance change after vibration | -10 | 10 | % | Vibration 10Hz-2000Hz, 2h in each of 3 directions | 6 | ||
| Inductance change after resistance to soldering heat | -10 | 10 | % | Solder temperature 260°C±5°C, immersion 5s±1s | 6 | ||
| Inductance change after heat resistance | -10 | 10 | % | Temperature 125°C, time 1000h (+48h,-0h) | 6 | ||
| Inductance change after cold resistance | -10 | 10 | % | Temperature -55°C, time 1000h (+48h,-0h) | 7 | ||
| Inductance change after humidity | -10 | 10 | % | 40°C±2°C, 90%(RH) to 95%(RH), 1000h (+48h,-0h) | 7 | ||
| Inductance change after temperature cycle | -10 | 10 | % | 10 cycles of -55°C/30min to 125°C/30min | 7 |
CAD (KiCad official)
- Symbol:
LQP03HQ3N3B02D - Footprint:
Inductor_SMD:L_0201_0603Metric - 3D model: 0201 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Murata Electronics datasheet (12 pp, sha256
8e2a3102852a20a8, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).