main
Ray
Publish 0.1.0
3c98666
LQP03HQ2N3B02D
Murata Electronics · Inductors (SMD) · 0201
LQP03HQ2N3B02D from Murata Electronics, in a 0201. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised inductor or ferrite bead; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised inductor or ferrite bead; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Murata Electronics |
| Package | 0201 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Inductance (nominal value) | L | 2.3 | nH | 2 | |||
| Inductance tolerance (code B) | L | -0.1 | 0.1 | nH | 2 | ||
| Q (min.) | Q | 20 | 2 | ||||
| DC resistance (max.) | 0.12 | Ω | 2 | ||||
| Self-resonant frequency (lower limit / typical) | 9000 | 13800 | MHz | Measured with Keysight N5230A or equivalent (test 7.4); typical value is actual performance | 2 | ||
| Rated current | 600 | mA | Product temperature rise 25°C max. (test 7.5) | 2 | |||
| Operating temperature range | -55 | 125 | °C | 1 | |||
| Storage temperature range | -55 | 125 | °C | 1 | |||
| Recommended storage temperature range | -10 | 40 | °C | Recommended storage range | 13 | ||
| Recommended storage relative humidity | 15 | 85 | %RH | Recommended storage range | 13 | ||
| Inductance change rate after vibration | -10 | 10 | % | Vibration 10 Hz to 2000 Hz, approx. 20 min per sweep, 6 h total | 7 | ||
| Inductance change rate after resistance to soldering heat | -10 | 10 | % | Solder temperature 260°C±5°C, immersion 5 s±1 s | 8 | ||
| Inductance change rate after heat resistance | -10 | 10 | % | Temperature 125°C±2°C, test time 1000 h | 8 | ||
| Inductance change rate after cold resistance | -10 | 10 | % | Temperature -55°C±3°C, test time 1000 h | 8 | ||
| Inductance change rate after humidity test | -10 | 10 | % | 40°C±2°C, 90% RH to 95% RH, test time 1000 h | 8 | ||
| Inductance change rate after temperature cycle | -10 | 10 | % | 10 cycles, -55°C to +125°C single-cycle steps | 8 | ||
| Reflow limit peak temperature | 260 | °C | Limit profile, 260°C/10 s | 11 | |||
| Cleaning temperature (max.) | 60 | °C | Cleaning; if isopropyl alcohol is used, 40°C max. | 13 |
CAD (KiCad official)
- Symbol:
LQP03HQ2N3B02D - Footprint:
Inductor_SMD:L_0201_0603Metric - 3D model: 0201 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Murata Electronics datasheet (15 pp, sha256
ca8f954d8c8a259f, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LQP03HQ2N3B02D
**Murata Electronics** · Inductors (SMD) · 0201
LQP03HQ2N3B02D from Murata Electronics, in a 0201. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised inductor or ferrite bead; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised inductor or ferrite bead; either orientation. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Murata Electronics |
| Package | 0201 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Inductance (nominal value) | L | | 2.3 | | nH | | 2 |
| Inductance tolerance (code B) | L | -0.1 | | 0.1 | nH | | 2 |
| Q (min.) | Q | 20 | | | | | 2 |
| DC resistance (max.) | | | | 0.12 | Ω | | 2 |
| Self-resonant frequency (lower limit / typical) | | 9000 | 13800 | | MHz | Measured with Keysight N5230A or equivalent (test 7.4); typical value is actual performance | 2 |
| Rated current | | | | 600 | mA | Product temperature rise 25°C max. (test 7.5) | 2 |
| Operating temperature range | | -55 | | 125 | °C | | 1 |
| Storage temperature range | | -55 | | 125 | °C | | 1 |
| Recommended storage temperature range | | -10 | | 40 | °C | Recommended storage range | 13 |
| Recommended storage relative humidity | | 15 | | 85 | %RH | Recommended storage range | 13 |
| Inductance change rate after vibration | | -10 | | 10 | % | Vibration 10 Hz to 2000 Hz, approx. 20 min per sweep, 6 h total | 7 |
| Inductance change rate after resistance to soldering heat | | -10 | | 10 | % | Solder temperature 260°C±5°C, immersion 5 s±1 s | 8 |
| Inductance change rate after heat resistance | | -10 | | 10 | % | Temperature 125°C±2°C, test time 1000 h | 8 |
| Inductance change rate after cold resistance | | -10 | | 10 | % | Temperature -55°C±3°C, test time 1000 h | 8 |
| Inductance change rate after humidity test | | -10 | | 10 | % | 40°C±2°C, 90% RH to 95% RH, test time 1000 h | 8 |
| Inductance change rate after temperature cycle | | -10 | | 10 | % | 10 cycles, -55°C to +125°C single-cycle steps | 8 |
| Reflow limit peak temperature | | | | 260 | °C | Limit profile, 260°C/10 s | 11 |
| Cleaning temperature (max.) | | | | 60 | °C | Cleaning; if isopropyl alcohol is used, 40°C max. | 13 |
## CAD (KiCad official)
- Symbol: `LQP03HQ2N3B02D`
- Footprint: `Inductor_SMD:L_0201_0603Metric`
- 3D model: 0201 (KiCad packages3D, STEP)
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Murata Electronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589041612575936512) (15 pp, sha256 `ca8f954d8c8a259f`, retrieved 2026-10-17, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins`, primary `two-terminal convention` (convention), consensus `off` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lqp03hq2n3b02d-datasheet.pdf)