main
Ray
Publish 0.1.0
a710283
LQM18DZ220M70L
Murata Electronics · Inductors (SMD) · 0603
LQM18DZ220M70L from Murata Electronics, in a 0603. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Terminal 1 | passive | One end of the 22 µH ±20% non-polarized inductor winding, rated 200 mA (temperature rise), DC resistance 2.40±0.72 Ω. |
| 2 | Terminal 2 | passive | Other end of the non-polarized inductor winding (the drawing marks 'no polarity'), so it can be mounted either way round. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Murata Electronics |
| Package | 0603 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Inductance tolerance | -20 | 20 | % | Tolerance M (±20%) per part numbering and part table | 1 | ||
| Operating temperature range | -55 | 125 | °C | Operating temperature range | 1 | ||
| Storage temperature range | -55 | 125 | °C | Storage temperature range | 1 | ||
| Recommended storage temperature range | -10 | 40 | °C | Recommended storage temperature range (11.9) | 9 | ||
| Recommended storage relative humidity range | 15 | 85 | % | Recommended relative humidity range (11.9) | 9 | ||
| Self-resonant frequency | 15 | MHz | Minimum for 22 µH; measured with Keysight E4294A or equivalent (7.3) | 1 | |||
| Rated current | 50 | mA | Rated current for LQM18DZ220M70L (22 µH) per chapter 3 | 1 | |||
| ESD withstand voltage (ESD rank 4) | 6000 | 8000 | V (DC) | ESD rank 4: 6000 V (DC) to < 8000 V (DC) maximum withstand voltage | 1 | ||
| Temperature rise caused by self-generated heat | 40 | °C | When rated current is applied (7.4) | 2 | |||
| Inductance change at rated current | -50 | 50 | % | When rated current is applied; within ±50% of initial inductance (7.4) | 2 | ||
| High temperature exposure: inductance change | -50 | 50 | % | 1000 h at 125°C, set 24 h at room condition then measured; 6.8-22 µH | 3 | ||
| Temperature cycling: inductance change | -50 | 50 | % | 1000 cycles, -55°C to +125°C | 3 | ||
| Biased humidity: inductance change | -50 | 50 | % | 1000 h at 85°C, 85% RH, unpowered | 3 | ||
| Operational life: inductance change | -50 | 50 | % | Apply 125°C 1000 h | 3 | ||
| Mechanical shock: inductance change | -50 | 50 | % | Per MIL-STD-202 Method 213, Condition C: 100 g's/6 ms/half sine | 3 | ||
| Vibration: inductance change | -30 | 30 | % | 5 g's for 20 min, 12 cycles each of 3 orientations, 10 Hz to 2000 Hz | 3 | ||
| Resistance to soldering heat: inductance change | 50 | % | Solder 260°C±5°C, immersion 10 s; 15-47 µH rows, pre-heating 150°C/60 s | 3 | |||
| ESD (AEC-Q200-002): inductance change | -50 | 50 | % | Per AEC-Q200-002 | 3 | ||
| Board flex: inductance change | -30 | 30 | % | Epoxy-PCB 1.6 mm, deflection 2 mm min, 60 s minimum holding time; 6.8-22 µH | 3 | ||
| Inductance | L | 22 | µH | Measured at 1 MHz with Keysight 4294A or equivalent (7.1) | 1 | ||
| DC resistance | DCR | -0.72 | 2.4 | 0.72 | Ω | Printed as 2.40±0.72 Ω; measured with digital multimeter (7.2) | 1 |
CAD (KiCad official)
- Symbol:
LQM18DZ220M70L - Footprint:
Inductor_SMD:L_0603_1608Metric - 3D model: 0603 (KiCad packages3D, STEP)
- 3D model files:
lqm18dz220m70l-etched.step/lqm18dz220m70l-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lqm18dz220m70l.step/lqm18dz220m70l.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Murata Electronics datasheet (10 pp, sha256
a099842487659d58, retrieved 2026-11-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LQM18DZ220M70L
**Murata Electronics** · Inductors (SMD) · 0603
LQM18DZ220M70L from Murata Electronics, in a 0603. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Terminal 1 | passive | One end of the 22 µH ±20% non-polarized inductor winding, rated 200 mA (temperature rise), DC resistance 2.40±0.72 Ω. |
| 2 | Terminal 2 | passive | Other end of the non-polarized inductor winding (the drawing marks 'no polarity'), so it can be mounted either way round. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Murata Electronics |
| Package | 0603 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Inductance tolerance | | -20 | | 20 | % | Tolerance M (±20%) per part numbering and part table | 1 |
| Operating temperature range | | -55 | | 125 | °C | Operating temperature range | 1 |
| Storage temperature range | | -55 | | 125 | °C | Storage temperature range | 1 |
| Recommended storage temperature range | | -10 | | 40 | °C | Recommended storage temperature range (11.9) | 9 |
| Recommended storage relative humidity range | | 15 | | 85 | % | Recommended relative humidity range (11.9) | 9 |
| Self-resonant frequency | | 15 | | | MHz | Minimum for 22 µH; measured with Keysight E4294A or equivalent (7.3) | 1 |
| Rated current | | | | 50 | mA | Rated current for LQM18DZ220M70L (22 µH) per chapter 3 | 1 |
| ESD withstand voltage (ESD rank 4) | | 6000 | | 8000 | V (DC) | ESD rank 4: 6000 V (DC) to < 8000 V (DC) maximum withstand voltage | 1 |
| Temperature rise caused by self-generated heat | | | | 40 | °C | When rated current is applied (7.4) | 2 |
| Inductance change at rated current | | -50 | | 50 | % | When rated current is applied; within ±50% of initial inductance (7.4) | 2 |
| High temperature exposure: inductance change | | -50 | | 50 | % | 1000 h at 125°C, set 24 h at room condition then measured; 6.8-22 µH | 3 |
| Temperature cycling: inductance change | | -50 | | 50 | % | 1000 cycles, -55°C to +125°C | 3 |
| Biased humidity: inductance change | | -50 | | 50 | % | 1000 h at 85°C, 85% RH, unpowered | 3 |
| Operational life: inductance change | | -50 | | 50 | % | Apply 125°C 1000 h | 3 |
| Mechanical shock: inductance change | | -50 | | 50 | % | Per MIL-STD-202 Method 213, Condition C: 100 g's/6 ms/half sine | 3 |
| Vibration: inductance change | | -30 | | 30 | % | 5 g's for 20 min, 12 cycles each of 3 orientations, 10 Hz to 2000 Hz | 3 |
| Resistance to soldering heat: inductance change | | | | 50 | % | Solder 260°C±5°C, immersion 10 s; 15-47 µH rows, pre-heating 150°C/60 s | 3 |
| ESD (AEC-Q200-002): inductance change | | -50 | | 50 | % | Per AEC-Q200-002 | 3 |
| Board flex: inductance change | | -30 | | 30 | % | Epoxy-PCB 1.6 mm, deflection 2 mm min, 60 s minimum holding time; 6.8-22 µH | 3 |
| Inductance | L | | 22 | | µH | Measured at 1 MHz with Keysight 4294A or equivalent (7.1) | 1 |
| DC resistance | DCR | -0.72 | 2.4 | 0.72 | Ω | Printed as 2.40±0.72 Ω; measured with digital multimeter (7.2) | 1 |
## CAD (KiCad official)
- Symbol: `LQM18DZ220M70L`
- Footprint: `Inductor_SMD:L_0603_1608Metric`
- 3D model: 0603 (KiCad packages3D, STEP)
- 3D model files: `lqm18dz220m70l-etched.step` / `lqm18dz220m70l-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lqm18dz220m70l.step` / `lqm18dz220m70l.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Murata Electronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590361831291052032) (10 pp, sha256 `a099842487659d58`, retrieved 2026-11-07, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lqm18dz220m70l-datasheet.pdf)