main
Ray
Publish 0.1.0
a016762
LQM18DN220M70L
Murata Electronics · Inductors (SMD) · 0603
LQM18DN220M70L from Murata Electronics, in a 0603. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of the 22 µH ±20% chip inductor (no polarity); rated current 50 mA based on inductance change, 200 mA based on temperature rise. |
| 2 | 2 | passive | Terminal 2 of the 22 µH ±20% chip inductor (no polarity); DC resistance 2.40±0.72 Ω, self-resonant frequency 15 MHz min. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Murata Electronics |
| Package | 0603 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Inductance tolerance | -20 | 20 | % | Part number tolerance code M (±20%) | 1 | ||
| DC resistance tolerance | DCR | -0.72 | 2.4 | 0.72 | Ω | Printed as 2.40±0.72 Ω for 22 μH; measured with digital multimeter (test circuit with switch) | 1 |
| Self-resonant frequency | SRF | 15 | MHz | Minimum, for 22 μH | 1 | ||
| Rated current (based on inductance change) | IR | 50 | mA | Inductance within ±50% of initial value at rated current | 1 | ||
| Rated current (based on temperature rise) | IR | 200 | mA | Temperature rise from self-generated heat limited to 40°C max | 1 | ||
| Inductance | L | 22 | μH | Measured at 1 MHz (Keysight 4294A or equivalent) | 1 | ||
| Inductance change at rated current | ΔL/L | -50 | 50 | % | Rated current applied; inductance within ±50% of initial value | 2 | |
| Temperature rise at rated current | ΔT | 40 | °C | Self-generated heat at rated current specified in chapter 3 | 2 | ||
| Operating temperature range | T_op | -55 | 125 | °C | Chapter 3 rating | 1 | |
| Storage temperature range | T_stg | -55 | 125 | °C | Chapter 3 rating | 1 | |
| Inductance change after resistance to soldering heat | ΔL/L | 50 | % | Inductance value 15 μH to 47 μH; flux, Sn-3.0Ag-0.5Cu solder at 260°C±5°C, immersion 10 s | 3 | ||
| Inductance change after heat resistance test | ΔL/L | -50 | 50 | % | Inductance value 6.8 μH to 22 μH; 125°C±2°C, 1000 h | 4 | |
| Inductance change after cold resistance test | ΔL/L | -50 | 50 | % | -55°C±2°C, 1000 h | 4 | |
| Inductance change after humidity test | ΔL/L | -50 | 50 | % | 40°C±2°C, 90% to 95% RH, 1000 h | 4 | |
| Inductance change after temperature cycle test | ΔL/L | -50 | 50 | % | -55°C to +125°C single cycle, 100 cycles | 4 | |
| Reflow limit peak temperature | T_reflow | 260 | °C | Limit reflow profile: 260°C/10 s, 2 cycles | 8 |
CAD (KiCad official)
- Symbol:
LQM18DN220M70L - Footprint:
Inductor_SMD:L_0603_1608Metric - 3D model: 0603 (KiCad packages3D, STEP)
- 3D model files:
lqm18dn220m70l-etched.step/lqm18dn220m70l-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lqm18dn220m70l.step/lqm18dn220m70l.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Murata Electronics datasheet (11 pp, sha256
a52042a01fd3c764, retrieved 2026-11-06, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LQM18DN220M70L
**Murata Electronics** · Inductors (SMD) · 0603
LQM18DN220M70L from Murata Electronics, in a 0603. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of the 22 µH ±20% chip inductor (no polarity); rated current 50 mA based on inductance change, 200 mA based on temperature rise. |
| 2 | 2 | passive | Terminal 2 of the 22 µH ±20% chip inductor (no polarity); DC resistance 2.40±0.72 Ω, self-resonant frequency 15 MHz min. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Murata Electronics |
| Package | 0603 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Inductance tolerance | | -20 | | 20 | % | Part number tolerance code M (±20%) | 1 |
| DC resistance tolerance | DCR | -0.72 | 2.4 | 0.72 | Ω | Printed as 2.40±0.72 Ω for 22 μH; measured with digital multimeter (test circuit with switch) | 1 |
| Self-resonant frequency | SRF | 15 | | | MHz | Minimum, for 22 μH | 1 |
| Rated current (based on inductance change) | IR | | | 50 | mA | Inductance within ±50% of initial value at rated current | 1 |
| Rated current (based on temperature rise) | IR | | | 200 | mA | Temperature rise from self-generated heat limited to 40°C max | 1 |
| Inductance | L | | 22 | | μH | Measured at 1 MHz (Keysight 4294A or equivalent) | 1 |
| Inductance change at rated current | ΔL/L | -50 | | 50 | % | Rated current applied; inductance within ±50% of initial value | 2 |
| Temperature rise at rated current | ΔT | | | 40 | °C | Self-generated heat at rated current specified in chapter 3 | 2 |
| Operating temperature range | T_op | -55 | | 125 | °C | Chapter 3 rating | 1 |
| Storage temperature range | T_stg | -55 | | 125 | °C | Chapter 3 rating | 1 |
| Inductance change after resistance to soldering heat | ΔL/L | | | 50 | % | Inductance value 15 μH to 47 μH; flux, Sn-3.0Ag-0.5Cu solder at 260°C±5°C, immersion 10 s | 3 |
| Inductance change after heat resistance test | ΔL/L | -50 | | 50 | % | Inductance value 6.8 μH to 22 μH; 125°C±2°C, 1000 h | 4 |
| Inductance change after cold resistance test | ΔL/L | -50 | | 50 | % | -55°C±2°C, 1000 h | 4 |
| Inductance change after humidity test | ΔL/L | -50 | | 50 | % | 40°C±2°C, 90% to 95% RH, 1000 h | 4 |
| Inductance change after temperature cycle test | ΔL/L | -50 | | 50 | % | -55°C to +125°C single cycle, 100 cycles | 4 |
| Reflow limit peak temperature | T_reflow | | | 260 | °C | Limit reflow profile: 260°C/10 s, 2 cycles | 8 |
## CAD (KiCad official)
- Symbol: `LQM18DN220M70L`
- Footprint: `Inductor_SMD:L_0603_1608Metric`
- 3D model: 0603 (KiCad packages3D, STEP)
- 3D model files: `lqm18dn220m70l-etched.step` / `lqm18dn220m70l-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lqm18dn220m70l.step` / `lqm18dn220m70l.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Murata Electronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590301859710861312) (11 pp, sha256 `a52042a01fd3c764`, retrieved 2026-11-06, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lqm18dn220m70l-datasheet.pdf)