main
Ray
Publish 0.1.0
bcdc54a
LQH32NH150J23L
Murata Electronics · Power Inductors · 1210
LQH32NH150J23L from Murata Electronics, in a 1210. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised inductor or ferrite bead; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised inductor or ferrite bead; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Murata Electronics |
| Package | 1210 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Self resonant frequency (S.R.F), min | SRF | 25 | MHz | Measured with KEYSIGHT E4991A or equivalent (item 6.3) | 1 | ||
| DC resistance | DCR | 0.5 | Ω | Measured with digital multi meter (item 6.2); datasheet gives a single value without min/max label | 1 | ||
| Rated current self temperature rise | 20 | °C | Rated current applied (item 6.4) | 2 | |||
| Inductance change at rated current | -10 | 10 | % | Rated current applied (item 6.4) | 2 | ||
| Inductance change, high temperature exposure | -5 | 5 | % | 1000 hours at 125 deg C; meet Table A after testing (AEC-Q200 item 3) | 2 | ||
| Inductance change, temperature cycling | -5 | 5 | % | 1000 cycles, -40 deg C to +125 deg C; meet Table A after testing (AEC-Q200 item 4) | 2 | ||
| Inductance change, biased humidity | -5 | 5 | % | 1000 hours at 85 deg C, 85%RH unpowered; meet Table A after testing (AEC-Q200 item 7) | 3 | ||
| Inductance change, operational life | -5 | 5 | % | Apply 125 deg C 1000 hours; meet Table A after testing (AEC-Q200 item 8) | 3 | ||
| Inductance change, mechanical shock | -5 | 5 | % | Per MIL-STD-202 Method 213, 100g's/6ms/Half sine; meet Table A after testing (AEC-Q200 item 13) | 3 | ||
| Inductance change, vibration | -5 | 5 | % | 5g's for 20 minutes, 12 cycles each of 3 orientations, 10-2000Hz; meet Table A after testing (AEC-Q200 item 14) | 3 | ||
| Inductance change, resistance to soldering heat | -5 | 5 | % | Solder temperature 260 deg C +/-5 deg C, immersion time 10 s; meet Table A after testing (AEC-Q200 item 15) | 3 | ||
| DC resistance change, board flex | -10 | 10 | % | Epoxy-PCB (1.6mm), deflection 2mm (min), 60s minimum holding time; meet Table B after testing (AEC-Q200 item 21) | 3 | ||
| DC resistance change, terminal strength | -10 | 10 | % | Per AEC-Q200-006, force of 17.7N for 60s; meet Table B after testing (AEC-Q200 item 22) | 3 | ||
| Inductance nominal | L | 15 | μH | Part number 150 = 15 μH; measured at 1MHz (item 6.1) | 1 | ||
| Inductance tolerance | L | -5 | 5 | % | Tolerance code J = ±5% | 1 | |
| ESD rank | 8 | kV | ESD rank 5A: 8kV (H), per AEC-Q200-002 | 1 | |||
| Operating temperature range | -40 | 125 | °C | Operating Temperature Range | 1 | ||
| Storage temperature range | -40 | 125 | °C | Storage Temperature Range | 1 | ||
| Storage temperature (warehouse, before use) | -10 | 40 | °C | Humidity 15 to 85% relative humidity; use within 12 months after delivery | 8 | ||
| Reflow limit profile peak temperature | 260 | °C | Limit soldering profile, 10 s, 2 cycles max | 6 | |||
| Soldering iron tip temperature (rework) | 350 | °C | Reworking with soldering iron: soldering iron output 80W max, soldering time 3 s, 2 times | 7 |
CAD (KiCad official)
- Symbol:
LQH32NH150J23L - Footprint:
Inductor_SMD:L_1210_3225Metric - 3D model: 1210 (KiCad packages3D, STEP)
- 3D model files:
lqh32nh150j23l-etched.step/lqh32nh150j23l-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lqh32nh150j23l.step/lqh32nh150j23l.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Murata Electronics datasheet (9 pp, sha256
41f42fb0cd75d157, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LQH32NH150J23L
**Murata Electronics** · Power Inductors · 1210
LQH32NH150J23L from Murata Electronics, in a 1210. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised inductor or ferrite bead; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised inductor or ferrite bead; either orientation. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Murata Electronics |
| Package | 1210 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Self resonant frequency (S.R.F), min | SRF | 25 | | | MHz | Measured with KEYSIGHT E4991A or equivalent (item 6.3) | 1 |
| DC resistance | DCR | | | 0.5 | Ω | Measured with digital multi meter (item 6.2); datasheet gives a single value without min/max label | 1 |
| Rated current self temperature rise | | | | 20 | °C | Rated current applied (item 6.4) | 2 |
| Inductance change at rated current | | -10 | | 10 | % | Rated current applied (item 6.4) | 2 |
| Inductance change, high temperature exposure | | -5 | | 5 | % | 1000 hours at 125 deg C; meet Table A after testing (AEC-Q200 item 3) | 2 |
| Inductance change, temperature cycling | | -5 | | 5 | % | 1000 cycles, -40 deg C to +125 deg C; meet Table A after testing (AEC-Q200 item 4) | 2 |
| Inductance change, biased humidity | | -5 | | 5 | % | 1000 hours at 85 deg C, 85%RH unpowered; meet Table A after testing (AEC-Q200 item 7) | 3 |
| Inductance change, operational life | | -5 | | 5 | % | Apply 125 deg C 1000 hours; meet Table A after testing (AEC-Q200 item 8) | 3 |
| Inductance change, mechanical shock | | -5 | | 5 | % | Per MIL-STD-202 Method 213, 100g's/6ms/Half sine; meet Table A after testing (AEC-Q200 item 13) | 3 |
| Inductance change, vibration | | -5 | | 5 | % | 5g's for 20 minutes, 12 cycles each of 3 orientations, 10-2000Hz; meet Table A after testing (AEC-Q200 item 14) | 3 |
| Inductance change, resistance to soldering heat | | -5 | | 5 | % | Solder temperature 260 deg C +/-5 deg C, immersion time 10 s; meet Table A after testing (AEC-Q200 item 15) | 3 |
| DC resistance change, board flex | | -10 | | 10 | % | Epoxy-PCB (1.6mm), deflection 2mm (min), 60s minimum holding time; meet Table B after testing (AEC-Q200 item 21) | 3 |
| DC resistance change, terminal strength | | -10 | | 10 | % | Per AEC-Q200-006, force of 17.7N for 60s; meet Table B after testing (AEC-Q200 item 22) | 3 |
| Inductance nominal | L | | 15 | | μH | Part number 150 = 15 μH; measured at 1MHz (item 6.1) | 1 |
| Inductance tolerance | L | -5 | | 5 | % | Tolerance code J = ±5% | 1 |
| ESD rank | | | | 8 | kV | ESD rank 5A: 8kV (H), per AEC-Q200-002 | 1 |
| Operating temperature range | | -40 | | 125 | °C | Operating Temperature Range | 1 |
| Storage temperature range | | -40 | | 125 | °C | Storage Temperature Range | 1 |
| Storage temperature (warehouse, before use) | | -10 | | 40 | °C | Humidity 15 to 85% relative humidity; use within 12 months after delivery | 8 |
| Reflow limit profile peak temperature | | | | 260 | °C | Limit soldering profile, 10 s, 2 cycles max | 6 |
| Soldering iron tip temperature (rework) | | | | 350 | °C | Reworking with soldering iron: soldering iron output 80W max, soldering time 3 s, 2 times | 7 |
## CAD (KiCad official)
- Symbol: `LQH32NH150J23L`
- Footprint: `Inductor_SMD:L_1210_3225Metric`
- 3D model: 1210 (KiCad packages3D, STEP)
- 3D model files: `lqh32nh150j23l-etched.step` / `lqh32nh150j23l-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lqh32nh150j23l.step` / `lqh32nh150j23l.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Murata Electronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589012201969082368) (9 pp, sha256 `41f42fb0cd75d157`, retrieved 2026-10-17, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins`, primary `two-terminal convention` (convention), consensus `off` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lqh32nh150j23l-datasheet.pdf)