Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LQH2HPN4R7MDRL

Murata Electronics · Power Inductors · 1008

LQH2HPN4R7MDRL from Murata Electronics, in a 1008. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1 passive Terminal 1 of an unpolarised inductor or ferrite bead; either orientation.
2 2 passive Terminal 2 of an unpolarised inductor or ferrite bead; either orientation.

Key specifications

Parameter Value
Manufacturer Murata Electronics
Package 1008
Category Inductors, Coils, Chokes
Pins 2

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Inductance tolerance -20 20 % Tolerance code M; measuring frequency 1 MHz 1
DC resistance tolerance -20 20 % 1
Inductance change at rated current -30 30 % When rated current is applied 1
Temperature rise by self-generated heat, ambient 85°C 40 °C Rated current applied; ambient temperature 85°C max 1
Temperature rise by self-generated heat, ambient 85°C to 105°C 20 °C Rated current applied; ambient temperature 85°C to 105°C 1
Operating temperature range (ambient, excluding self-temperature rise) -40 105 °C Ambient temperature not including self-temperature rise 1
Operating temperature range (product, including self-temperature rise) -40 125 °C Product temperature including self-temperature rise 1
Storage temperature range -40 105 °C 1
Recommended storage temperature -10 40 °C Recommended storage range; use within 12 months of delivery 8
Recommended storage relative humidity 15 85 %RH Recommended storage range 8
Heat resistance: inductance change rate -10 10 % Temperature 105°C±2°C; test time 1000 h 3
Heat resistance: DC resistance change rate -10 10 % Temperature 105°C±2°C; test time 1000 h 3
Cold resistance: inductance change rate -10 10 % Temperature -40°C±2°C; test time 1000 h 3
Cold resistance: DC resistance change rate -10 10 % Temperature -40°C±2°C; test time 1000 h 3
Humidity: inductance change rate -10 10 % 85°C±2°C; humidity 80% to 85% RH; test time 1000 h 3
Humidity: DC resistance change rate -10 10 % 85°C±2°C; humidity 80% to 85% RH; test time 1000 h 3
Temperature cycle: inductance change rate -10 10 % Step 1 -40°C, step 3 +105°C; 100 cycles 3
Temperature cycle: DC resistance change rate -10 10 % Step 1 -40°C, step 3 +105°C; 100 cycles 3
Resistance to soldering heat: inductance change rate -20 20 % Solder temperature 260°C±5°C; immersion 10 s 3
Self-resonant frequency 40 MHz Measured with Keysight E4991A or equivalent 1
Rated current (based on inductance change) 650 mA Inductance within ±30% of initial value at rated current 1
Rated current (based on temperature rise, ambient 85°C) 650 mA Ambient temperature 85°C 1
Rated current (based on temperature rise, ambient 105°C) 390 mA Ambient temperature 105°C 1
Cleaning temperature 60 °C IPA cleaner: 40°C max 7
Reflow peak temperature (limit profile) 260 °C Limit profile, 10 s; number of reflow cycles 2 max 6
Reflow heating above 230°C (limit profile) 60 s Limit profile; above 230°C, 60 s max 6
Soldering iron tip temperature (rework) 350 °C Rework with soldering iron; 1 time max 6
Pre-heating temperature difference (solder to product surface) 100 °C Pre-heating and cooling after soldering 5
Nominal inductance L 4.7 μH Measuring frequency 1 MHz 1
DC resistance (nominal) 0.56 Ω Printed as 0.56±20% 1

CAD (KiCad official)

  • Symbol: LQH2HPN4R7MDRL
  • Footprint: Inductor_SMD:L_1008_2520Metric
  • 3D model: 1008 (KiCad packages3D, STEP)
  • 3D model files: lqh2hpn4r7mdrl-etched.step / lqh2hpn4r7mdrl-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lqh2hpn4r7mdrl.step / lqh2hpn4r7mdrl.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Murata Electronics datasheet (8 pp, sha256 16dce20b3f66e15c, retrieved 2026-10-16, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins, primary two-terminal convention (convention), consensus off (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF