main
Ray
Publish 0.1.0
f5b8d2c
LQG15WZ0N7B02D
Murata Electronics · Inductors (SMD) · 0402
LQG15WZ0N7B02D from Murata Electronics, in a 0402. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised inductor or ferrite bead; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised inductor or ferrite bead; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Murata Electronics |
| Package | 0402 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC resistance | 0.03 | Ω | Measuring equipment: digital multimeter (sec 7.3) | 1 | |||
| Self-resonant frequency | 15000 | MHz | Measuring equipment: Keysight N5230A or equivalent (sec 7.4) | 1 | |||
| Rated current | 1200 | mA | Product temperature rise 25°C max. when rated current applied (sec 7.5) | 1 | |||
| Inductance tolerance (code B) | L | -0.1 | 0.1 | nH | Inductance measured at 100 MHz (sec 7.1) | 1 | |
| Nominal inductance | L | 0.7 | nH | Nominal value for part number code 0N7 | 1 | ||
| ESD rank withstand | 1 | kV | ESD rank 1C per AEC-Q200-002 | 1 | |||
| Inductance change rate after high temperature exposure | -10 | 10 | % | Table A; 1000 h at 125°C; inductance at 100 MHz | 8 | ||
| Inductance change rate after temperature cycling | -10 | 10 | % | Table A; 1000 cycles, -40°C to +125°C | 8 | ||
| Inductance change rate after biased humidity | -10 | 10 | % | Table A; 1000 h at 85°C, 85% RH, unpowered | 8 | ||
| Inductance change rate after operational life | -10 | 10 | % | Table A; apply 125°C, 1000 h | 8 | ||
| Inductance change rate after mechanical shock | -10 | 10 | % | Table A; MIL-STD-202 method 213, 100 g, 6 ms, half sine | 8 | ||
| Inductance change rate after vibration | -10 | 10 | % | Table A; 5 g, 20 min, 12 cycles each of 3 orientations, 10 Hz to 2000 Hz | 8 | ||
| Inductance change rate after resistance to soldering heat | -10 | 10 | % | Table A; solder 260°C±5°C, immersion 10 s | 8 | ||
| DC resistance change rate after board flex | -10 | 10 | % | Table B; epoxy PCB 1.6 mm, deflection 2 mm min., holding 60 s | 8 | ||
| Peak temperature (limit reflow profile) | 260 | °C | Limit profile 260°C/10 s; 2 reflow cycles | 12 | |||
| Time above 230°C (limit reflow profile) | 60 | s | Limit profile: above 230°C/60 s max. | 12 | |||
| Pre-heating temperature difference between solder and product surface | 150 | °C | Reflow pre-heating | 12 | |||
| Cooling temperature difference after soldering | 100 | °C | Cooling into solvent after soldering | 12 | |||
| Soldering iron tip temperature (rework) | 350 | °C | Rework with soldering iron | 12 | |||
| Soldering iron power (rework) | 80 | W | Rework with soldering iron | 12 | |||
| Solder paste thickness | 100 | 150 | μm | Standard thickness of solder paste | 11 | ||
| Cleaning temperature | 60 | °C | Cleaning; 40°C max if IPA is used | 14 | |||
| Cleaning temperature with IPA | 40 | °C | Cleaning with isopropyl alcohol | 14 | |||
| Ultrasonic cleaning power | 20 | W/L | Ultrasonic cleaning, 28 kHz to 40 kHz | 14 | |||
| Ultrasonic cleaning time | 5 | min | Ultrasonic cleaning | 14 | |||
| Operating temperature range | -55 | 125 | °C | Operating temperature range (sec 3) | 1 | ||
| Storage temperature range | -55 | 125 | °C | Storage temperature range (sec 3) | 1 | ||
| Recommended storage temperature | -10 | 40 | °C | Storage conditions (sec 11.9) | 14 | ||
| Recommended storage relative humidity | 15 | 85 | %RH | Storage conditions (sec 11.9) | 14 | ||
| Storage period before solderability check | 6 | months | Use product within 6 months after delivery | 14 |
CAD (KiCad official)
- Symbol:
LQG15WZ0N7B02D - Footprint:
Inductor_SMD:L_0402_1005Metric - 3D model: 0402 (KiCad packages3D, STEP)
- 3D model files:
lqg15wz0n7b02d-etched.step/lqg15wz0n7b02d-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lqg15wz0n7b02d.step/lqg15wz0n7b02d.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Murata Electronics datasheet (15 pp, sha256
0a623a675669fd96, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LQG15WZ0N7B02D
**Murata Electronics** · Inductors (SMD) · 0402
LQG15WZ0N7B02D from Murata Electronics, in a 0402. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised inductor or ferrite bead; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised inductor or ferrite bead; either orientation. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Murata Electronics |
| Package | 0402 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC resistance | | | | 0.03 | Ω | Measuring equipment: digital multimeter (sec 7.3) | 1 |
| Self-resonant frequency | | 15000 | | | MHz | Measuring equipment: Keysight N5230A or equivalent (sec 7.4) | 1 |
| Rated current | | | | 1200 | mA | Product temperature rise 25°C max. when rated current applied (sec 7.5) | 1 |
| Inductance tolerance (code B) | L | -0.1 | | 0.1 | nH | Inductance measured at 100 MHz (sec 7.1) | 1 |
| Nominal inductance | L | | 0.7 | | nH | Nominal value for part number code 0N7 | 1 |
| ESD rank withstand | | | | 1 | kV | ESD rank 1C per AEC-Q200-002 | 1 |
| Inductance change rate after high temperature exposure | | -10 | | 10 | % | Table A; 1000 h at 125°C; inductance at 100 MHz | 8 |
| Inductance change rate after temperature cycling | | -10 | | 10 | % | Table A; 1000 cycles, -40°C to +125°C | 8 |
| Inductance change rate after biased humidity | | -10 | | 10 | % | Table A; 1000 h at 85°C, 85% RH, unpowered | 8 |
| Inductance change rate after operational life | | -10 | | 10 | % | Table A; apply 125°C, 1000 h | 8 |
| Inductance change rate after mechanical shock | | -10 | | 10 | % | Table A; MIL-STD-202 method 213, 100 g, 6 ms, half sine | 8 |
| Inductance change rate after vibration | | -10 | | 10 | % | Table A; 5 g, 20 min, 12 cycles each of 3 orientations, 10 Hz to 2000 Hz | 8 |
| Inductance change rate after resistance to soldering heat | | -10 | | 10 | % | Table A; solder 260°C±5°C, immersion 10 s | 8 |
| DC resistance change rate after board flex | | -10 | | 10 | % | Table B; epoxy PCB 1.6 mm, deflection 2 mm min., holding 60 s | 8 |
| Peak temperature (limit reflow profile) | | | | 260 | °C | Limit profile 260°C/10 s; 2 reflow cycles | 12 |
| Time above 230°C (limit reflow profile) | | | | 60 | s | Limit profile: above 230°C/60 s max. | 12 |
| Pre-heating temperature difference between solder and product surface | | | | 150 | °C | Reflow pre-heating | 12 |
| Cooling temperature difference after soldering | | | | 100 | °C | Cooling into solvent after soldering | 12 |
| Soldering iron tip temperature (rework) | | | | 350 | °C | Rework with soldering iron | 12 |
| Soldering iron power (rework) | | | | 80 | W | Rework with soldering iron | 12 |
| Solder paste thickness | | 100 | | 150 | μm | Standard thickness of solder paste | 11 |
| Cleaning temperature | | | | 60 | °C | Cleaning; 40°C max if IPA is used | 14 |
| Cleaning temperature with IPA | | | | 40 | °C | Cleaning with isopropyl alcohol | 14 |
| Ultrasonic cleaning power | | | | 20 | W/L | Ultrasonic cleaning, 28 kHz to 40 kHz | 14 |
| Ultrasonic cleaning time | | | | 5 | min | Ultrasonic cleaning | 14 |
| Operating temperature range | | -55 | | 125 | °C | Operating temperature range (sec 3) | 1 |
| Storage temperature range | | -55 | | 125 | °C | Storage temperature range (sec 3) | 1 |
| Recommended storage temperature | | -10 | | 40 | °C | Storage conditions (sec 11.9) | 14 |
| Recommended storage relative humidity | | 15 | | 85 | %RH | Storage conditions (sec 11.9) | 14 |
| Storage period before solderability check | | | | 6 | months | Use product within 6 months after delivery | 14 |
## CAD (KiCad official)
- Symbol: `LQG15WZ0N7B02D`
- Footprint: `Inductor_SMD:L_0402_1005Metric`
- 3D model: 0402 (KiCad packages3D, STEP)
- 3D model files: `lqg15wz0n7b02d-etched.step` / `lqg15wz0n7b02d-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lqg15wz0n7b02d.step` / `lqg15wz0n7b02d.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Murata Electronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588956849928749056) (15 pp, sha256 `0a623a675669fd96`, retrieved 2026-10-17, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins`, primary `two-terminal convention` (convention), consensus `off` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lqg15wz0n7b02d-datasheet.pdf)