main
Ray
Publish 0.1.0
4a22d95
LPV542DGKR
Texas Instruments · Operational Amplifier · VSSOP-8
LPV542DGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Channel A output; it swings to within 3 mV of the rails (typical) when the load is 100 kΩ to V+/2. |
| 2 | -IN A | input | Channel A inverting input; the input common-mode range extends to the supply rails (V- to V+). |
| 3 | +IN A | input | Channel A non-inverting input; signal inputs are diode-clamped to the supply rails and signals more than 0.3 V beyond the rails should be current-limited to 10 mA or less. |
| 4 | V- | power_in | Negative (lowest) power supply; the device operates from 1.6 V to 5.5 V across V+ to V-, and supply voltages above 6 V can permanently damage the device. |
| 5 | +IN B | input | Channel B non-inverting input; signal inputs are diode-clamped to the supply rails and signals more than 0.3 V beyond the rails should be current-limited to 10 mA or less. |
| 6 | -IN B | input | Channel B inverting input; the input common-mode range extends to the supply rails (V- to V+). |
| 7 | OUT B | output | Channel B output; it swings to within 3 mV of the rails (typical) when the load is 100 kΩ to V+/2. |
| 8 | V+ | power_in | Positive (highest) power supply; the device operates from 1.6 V to 5.5 V across V+ to V-, and supply voltages above 6 V can permanently damage the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (V+ to V-) | V+ - V- | -0.3 | 6 | V | 4 | ||
| Current, signal input pins | -10 | 10 | mA | 4 | |||
| Junction temperature | TJ | -40 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage (V+, V-) | V+, V- | 1.6 | 5.5 | V | 4 | ||
| Specified temperature | -40 | 125 | °C | 4 | |||
| Junction-to-ambient thermal resistance (RθJA) | RθJA | 182.5 | °C/W | DGK (VSSOP) 8-pin package | 4 | ||
| Input bias current | IB | -0.1 | 0.1 | pA | 5 | ||
| Input offset current | IOS | -0.1 | 0.1 | pA | 5 | ||
| Input offset voltage | VOS | -2 | 1 | 2 | mV | V+ = 1.8 V, VCM = 0.3 V | 5 |
| Input offset voltage | VOS | -3 | 1 | 3 | mV | V+ = 1.8 V, VCM = 1.5 V | 5 |
| Input offset voltage over temperature | VOS | -4 | 4 | mV | V+ = 1.8 V, VCM = 0.3 V and 1.5 V | 5 | |
| Power-supply rejection ratio (PSRR) | PSRR | 80 | 109 | dB | V+ = 1.8 V, VS = 1.8 V to 5.5 V, VCM = 0.3 V | 5 | |
| Common-mode voltage range | VCM | 0 | 1.8 | V | V+ = 1.8 V, CMRR ≥ 57 dB | 5 | |
| Common-mode rejection ratio | CMRR | 57 | 92 | dB | V+ = 1.8 V, 0 V < VCM < 1.8 V | 5 | |
| Common-mode rejection ratio | CMRR | 87 | 92 | dB | V+ = 1.8 V, 0 V < VCM < 0.7 V | 5 | |
| Common-mode rejection ratio | CMRR | 57 | 98 | dB | V+ = 1.8 V, 1.3 V < VCM < 1.8 V | 5 | |
| Open-loop voltage gain | AOL | 91 | 101 | dB | V+ = 1.8 V, RL = 100 kΩ to V+/2, 0.5 V < VO < 1.3 V | 5 | |
| Voltage output swing from positive rail | 3 | 20 | mV | V+ = 1.8 V, RL = 100 kΩ to V+/2 | 5 | ||
| Voltage output swing from negative rail | 2 | 20 | mV | V+ = 1.8 V, RL = 100 kΩ to V+/2 | 5 | ||
| Output current sourcing | 1 | 3 | mA | V+ = 1.8 V, Sourcing, VO to V-, VIN(diff) = 100 mV | 5 | ||
| Output current sinking | 1 | 5 | mA | V+ = 1.8 V, Sinking, VO to V+, VIN(diff) = -100 mV | 5 | ||
| Quiescent current per channel (IQ) | IQ | 490 | 800 | nA | V+ = 1.8 V, VCM = 0.3 V, IO = 0 | 5 | |
| Quiescent current per channel (IQ) over temperature | IQ | 1100 | nA | Over temperature | 5 | ||
| Quiescent current per channel (IQ) | IQ | 680 | 1100 | nA | V+ = 1.8 V, VCM = 1.5 V, IO = 0 | 5 | |
| Quiescent current per channel (IQ) over temperature | IQ | 1500 | nA | Over temperature | 5 | ||
| Input offset voltage | VOS | -2 | 1 | 2 | mV | V+ = 3.3 V, VCM = 0.3 V | 6 |
| Input offset voltage | VOS | -3 | 1 | 3 | mV | V+ = 3.3 V, VCM = 3 V | 6 |
| Input offset voltage over temperature | VOS | -4 | 4 | mV | V+ = 3.3 V, VCM = 0.3 V and 3 V | 6 | |
| Power-supply rejection ratio (PSRR) | PSRR | 80 | 109 | dB | V+ = 3.3 V, VS = 1.8 V to 5.5 V, VCM = 0.3 V | 6 | |
| Common-mode voltage range | VCM | 0 | 3.3 | V | V+ = 3.3 V, CMRR ≥ 60 dB | 6 | |
| Common-mode rejection ratio | CMRR | 62 | 98 | dB | V+ = 3.3 V, 0 V < VCM < 3.3 V | 6 | |
| Common-mode rejection ratio | CMRR | 88 | 98 | dB | V+ = 3.3 V, 0 V < VCM < 2.2 V | 6 | |
| Common-mode rejection ratio | CMRR | 62 | 105 | dB | V+ = 3.3 V, 2.7 V < VCM < 3.3 V | 6 | |
| Open-loop voltage gain | AOL | 91 | 101 | dB | V+ = 3.3 V, RL = 100 kΩ to V+/2, 0.5 V < VO < 2.8 V | 6 | |
| Voltage output swing from positive rail | 3 | 20 | mV | V+ = 3.3 V, RL = 100 kΩ to V+/2 | 6 | ||
| Voltage output swing from negative rail | 2 | 20 | mV | V+ = 3.3 V, RL = 100 kΩ to V+/2 | 6 | ||
| Output current sourcing | 5 | 14 | mA | V+ = 3.3 V, Sourcing, VO to V-, VIN(diff) = 100 mV | 6 | ||
| Output current sinking | 5 | 19 | mA | V+ = 3.3 V, Sinking, VO to V+, VIN(diff) = -100 mV | 6 | ||
| Quiescent current per channel (IQ) | IQ | 480 | 800 | nA | V+ = 3.3 V, VCM = 0.3 V, IO = 0 | 6 | |
| Quiescent current per channel (IQ) over temperature | IQ | 1200 | nA | Over temperature | 6 | ||
| Quiescent current per channel (IQ) | IQ | 650 | 1100 | nA | V+ = 3.3 V, VCM = 3 V, IO = 0 | 6 | |
| Quiescent current per channel (IQ) over temperature | IQ | 1500 | nA | Over temperature | 6 | ||
| Input offset voltage | VOS | -2 | 1 | 2 | mV | V+ = 5 V, VCM = 0.3 V | 7 |
| Input offset voltage | VOS | -3 | 1 | 3 | mV | V+ = 5 V, VCM = 4.7 V | 7 |
| Input offset voltage over temperature | VOS | -4 | 4 | mV | V+ = 5 V, VCM = 0.3 V and 4.7 V | 7 | |
| Power-supply rejection ratio (PSRR) | PSRR | 80 | 109 | dB | V+ = 5 V, VS = 1.8 V to 5.5 V, VCM = 0.3 V | 7 | |
| Common-mode voltage range | VCM | 0 | 5 | V | V+ = 5 V, CMRR ≥ 60 dB | 7 | |
| Common-mode rejection ratio | CMRR | 65 | 101 | dB | V+ = 5 V, 0 V < VCM < 5 V | 7 | |
| Common-mode rejection ratio | CMRR | 88 | 101 | dB | V+ = 5 V, 0 V < VCM < 3.9 V | 7 | |
| Common-mode rejection ratio | CMRR | 65 | 109 | dB | V+ = 5 V, 4.4 V < VCM < 5 V | 7 | |
| Open-loop voltage gain | AOL | 91 | 101 | dB | V+ = 5 V, RL = 100 kΩ to V+/2, 0.5 V < VO < 4.5 V | 7 | |
| Voltage output swing from positive rail | 3 | 20 | mV | V+ = 5 V, RL = 100 kΩ to V+/2 | 7 | ||
| Voltage output swing from negative rail | 2 | 20 | mV | V+ = 5 V, RL = 100 kΩ to V+/2 | 7 | ||
| Output current sourcing | 10 | 30 | mA | V+ = 5 V, Sourcing, VO to V-, VIN(diff) = 100 mV | 7 | ||
| Output current sinking | 10 | 36 | mA | V+ = 5 V, Sinking, VO to V+, VIN(diff) = -100 mV | 7 | ||
| Quiescent current per channel (IQ) | IQ | 480 | 850 | nA | V+ = 5 V, VCM = 0.3 V, IO = 0 | 7 | |
| Quiescent current per channel (IQ) over temperature | IQ | 1300 | nA | Over temperature | 7 | ||
| Quiescent current per channel (IQ) | IQ | 680 | 1100 | nA | V+ = 5 V, VCM = 4.7 V, IO = 0 | 7 | |
| Quiescent current per channel (IQ) over temperature | IQ | 1600 | nA | Over temperature | 7 |
CAD (KiCad official)
- Symbol:
LPV542DGKR - Footprint:
Package_SO:VSSOP-8_3x3mm_P0.65mm - 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lpv542dgkr-etched.step/lpv542dgkr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lpv542dgkr.step/lpv542dgkr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
f5c8ff6bfc76d185, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LPV542DGKR
**Texas Instruments** · Operational Amplifier · VSSOP-8
LPV542DGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Channel A output; it swings to within 3 mV of the rails (typical) when the load is 100 kΩ to V+/2. |
| 2 | -IN A | input | Channel A inverting input; the input common-mode range extends to the supply rails (V- to V+). |
| 3 | +IN A | input | Channel A non-inverting input; signal inputs are diode-clamped to the supply rails and signals more than 0.3 V beyond the rails should be current-limited to 10 mA or less. |
| 4 | V- | power_in | Negative (lowest) power supply; the device operates from 1.6 V to 5.5 V across V+ to V-, and supply voltages above 6 V can permanently damage the device. |
| 5 | +IN B | input | Channel B non-inverting input; signal inputs are diode-clamped to the supply rails and signals more than 0.3 V beyond the rails should be current-limited to 10 mA or less. |
| 6 | -IN B | input | Channel B inverting input; the input common-mode range extends to the supply rails (V- to V+). |
| 7 | OUT B | output | Channel B output; it swings to within 3 mV of the rails (typical) when the load is 100 kΩ to V+/2. |
| 8 | V+ | power_in | Positive (highest) power supply; the device operates from 1.6 V to 5.5 V across V+ to V-, and supply voltages above 6 V can permanently damage the device. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (V+ to V-) | V+ - V- | -0.3 | | 6 | V | | 4 |
| Current, signal input pins | | -10 | | 10 | mA | | 4 |
| Junction temperature | TJ | -40 | | 150 | °C | | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| Supply voltage (V+, V-) | V+, V- | 1.6 | | 5.5 | V | | 4 |
| Specified temperature | | -40 | | 125 | °C | | 4 |
| Junction-to-ambient thermal resistance (RθJA) | RθJA | | 182.5 | | °C/W | DGK (VSSOP) 8-pin package | 4 |
| Input bias current | IB | -0.1 | | 0.1 | pA | | 5 |
| Input offset current | IOS | -0.1 | | 0.1 | pA | | 5 |
| Input offset voltage | VOS | -2 | 1 | 2 | mV | V+ = 1.8 V, VCM = 0.3 V | 5 |
| Input offset voltage | VOS | -3 | 1 | 3 | mV | V+ = 1.8 V, VCM = 1.5 V | 5 |
| Input offset voltage over temperature | VOS | -4 | | 4 | mV | V+ = 1.8 V, VCM = 0.3 V and 1.5 V | 5 |
| Power-supply rejection ratio (PSRR) | PSRR | 80 | 109 | | dB | V+ = 1.8 V, VS = 1.8 V to 5.5 V, VCM = 0.3 V | 5 |
| Common-mode voltage range | VCM | 0 | | 1.8 | V | V+ = 1.8 V, CMRR ≥ 57 dB | 5 |
| Common-mode rejection ratio | CMRR | 57 | 92 | | dB | V+ = 1.8 V, 0 V < VCM < 1.8 V | 5 |
| Common-mode rejection ratio | CMRR | 87 | 92 | | dB | V+ = 1.8 V, 0 V < VCM < 0.7 V | 5 |
| Common-mode rejection ratio | CMRR | 57 | 98 | | dB | V+ = 1.8 V, 1.3 V < VCM < 1.8 V | 5 |
| Open-loop voltage gain | AOL | 91 | 101 | | dB | V+ = 1.8 V, RL = 100 kΩ to V+/2, 0.5 V < VO < 1.3 V | 5 |
| Voltage output swing from positive rail | | | 3 | 20 | mV | V+ = 1.8 V, RL = 100 kΩ to V+/2 | 5 |
| Voltage output swing from negative rail | | | 2 | 20 | mV | V+ = 1.8 V, RL = 100 kΩ to V+/2 | 5 |
| Output current sourcing | | 1 | 3 | | mA | V+ = 1.8 V, Sourcing, VO to V-, VIN(diff) = 100 mV | 5 |
| Output current sinking | | 1 | 5 | | mA | V+ = 1.8 V, Sinking, VO to V+, VIN(diff) = -100 mV | 5 |
| Quiescent current per channel (IQ) | IQ | | 490 | 800 | nA | V+ = 1.8 V, VCM = 0.3 V, IO = 0 | 5 |
| Quiescent current per channel (IQ) over temperature | IQ | | | 1100 | nA | Over temperature | 5 |
| Quiescent current per channel (IQ) | IQ | | 680 | 1100 | nA | V+ = 1.8 V, VCM = 1.5 V, IO = 0 | 5 |
| Quiescent current per channel (IQ) over temperature | IQ | | | 1500 | nA | Over temperature | 5 |
| Input offset voltage | VOS | -2 | 1 | 2 | mV | V+ = 3.3 V, VCM = 0.3 V | 6 |
| Input offset voltage | VOS | -3 | 1 | 3 | mV | V+ = 3.3 V, VCM = 3 V | 6 |
| Input offset voltage over temperature | VOS | -4 | | 4 | mV | V+ = 3.3 V, VCM = 0.3 V and 3 V | 6 |
| Power-supply rejection ratio (PSRR) | PSRR | 80 | 109 | | dB | V+ = 3.3 V, VS = 1.8 V to 5.5 V, VCM = 0.3 V | 6 |
| Common-mode voltage range | VCM | 0 | | 3.3 | V | V+ = 3.3 V, CMRR ≥ 60 dB | 6 |
| Common-mode rejection ratio | CMRR | 62 | 98 | | dB | V+ = 3.3 V, 0 V < VCM < 3.3 V | 6 |
| Common-mode rejection ratio | CMRR | 88 | 98 | | dB | V+ = 3.3 V, 0 V < VCM < 2.2 V | 6 |
| Common-mode rejection ratio | CMRR | 62 | 105 | | dB | V+ = 3.3 V, 2.7 V < VCM < 3.3 V | 6 |
| Open-loop voltage gain | AOL | 91 | 101 | | dB | V+ = 3.3 V, RL = 100 kΩ to V+/2, 0.5 V < VO < 2.8 V | 6 |
| Voltage output swing from positive rail | | | 3 | 20 | mV | V+ = 3.3 V, RL = 100 kΩ to V+/2 | 6 |
| Voltage output swing from negative rail | | | 2 | 20 | mV | V+ = 3.3 V, RL = 100 kΩ to V+/2 | 6 |
| Output current sourcing | | 5 | 14 | | mA | V+ = 3.3 V, Sourcing, VO to V-, VIN(diff) = 100 mV | 6 |
| Output current sinking | | 5 | 19 | | mA | V+ = 3.3 V, Sinking, VO to V+, VIN(diff) = -100 mV | 6 |
| Quiescent current per channel (IQ) | IQ | | 480 | 800 | nA | V+ = 3.3 V, VCM = 0.3 V, IO = 0 | 6 |
| Quiescent current per channel (IQ) over temperature | IQ | | | 1200 | nA | Over temperature | 6 |
| Quiescent current per channel (IQ) | IQ | | 650 | 1100 | nA | V+ = 3.3 V, VCM = 3 V, IO = 0 | 6 |
| Quiescent current per channel (IQ) over temperature | IQ | | | 1500 | nA | Over temperature | 6 |
| Input offset voltage | VOS | -2 | 1 | 2 | mV | V+ = 5 V, VCM = 0.3 V | 7 |
| Input offset voltage | VOS | -3 | 1 | 3 | mV | V+ = 5 V, VCM = 4.7 V | 7 |
| Input offset voltage over temperature | VOS | -4 | | 4 | mV | V+ = 5 V, VCM = 0.3 V and 4.7 V | 7 |
| Power-supply rejection ratio (PSRR) | PSRR | 80 | 109 | | dB | V+ = 5 V, VS = 1.8 V to 5.5 V, VCM = 0.3 V | 7 |
| Common-mode voltage range | VCM | 0 | | 5 | V | V+ = 5 V, CMRR ≥ 60 dB | 7 |
| Common-mode rejection ratio | CMRR | 65 | 101 | | dB | V+ = 5 V, 0 V < VCM < 5 V | 7 |
| Common-mode rejection ratio | CMRR | 88 | 101 | | dB | V+ = 5 V, 0 V < VCM < 3.9 V | 7 |
| Common-mode rejection ratio | CMRR | 65 | 109 | | dB | V+ = 5 V, 4.4 V < VCM < 5 V | 7 |
| Open-loop voltage gain | AOL | 91 | 101 | | dB | V+ = 5 V, RL = 100 kΩ to V+/2, 0.5 V < VO < 4.5 V | 7 |
| Voltage output swing from positive rail | | | 3 | 20 | mV | V+ = 5 V, RL = 100 kΩ to V+/2 | 7 |
| Voltage output swing from negative rail | | | 2 | 20 | mV | V+ = 5 V, RL = 100 kΩ to V+/2 | 7 |
| Output current sourcing | | 10 | 30 | | mA | V+ = 5 V, Sourcing, VO to V-, VIN(diff) = 100 mV | 7 |
| Output current sinking | | 10 | 36 | | mA | V+ = 5 V, Sinking, VO to V+, VIN(diff) = -100 mV | 7 |
| Quiescent current per channel (IQ) | IQ | | 480 | 850 | nA | V+ = 5 V, VCM = 0.3 V, IO = 0 | 7 |
| Quiescent current per channel (IQ) over temperature | IQ | | | 1300 | nA | Over temperature | 7 |
| Quiescent current per channel (IQ) | IQ | | 680 | 1100 | nA | V+ = 5 V, VCM = 4.7 V, IO = 0 | 7 |
| Quiescent current per channel (IQ) over temperature | IQ | | | 1600 | nA | Over temperature | 7 |
## CAD (KiCad official)
- Symbol: `LPV542DGKR`
- Footprint: `Package_SO:VSSOP-8_3x3mm_P0.65mm`
- 3D model: VSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `lpv542dgkr-etched.step` / `lpv542dgkr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lpv542dgkr.step` / `lpv542dgkr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lpv542.pdf) (30 pp, sha256 `f5c8ff6bfc76d185`, retrieved 2026-11-11, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lpv542dgkr-datasheet.pdf)