main
Ray
lpv521mgx: laser-etched CAD + chip hero (factory 2.0.0 backfill)
e2e9d15
LPV521MGX
Texas Instruments · Operational Amplifier · SC-70-5
LPV521MGX from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output. Rail-to-rail output, can source/sink ~1 mA (typ 3 mA) with output swing within ~2 mV of either supply rail into RL = 100 kΩ. |
| 2 | V- | power_in | Negative power supply (typically GND for single-supply operation). Total supply voltage V+ − V- must be 1.6 V to 5.5 V. |
| 3 | IN+ | input | Noninverting input. Rail-to-rail common-mode input range (0 V to V+); input bias current typically 40 fA. Must stay within V- − 0.3 V to V+ + 0.3 V. |
| 4 | IN- | input | Inverting input. Rail-to-rail common-mode input range (0 V to V+); input bias current typically 40 fA. Must stay within V- − 0.3 V to V+ + 0.3 V. |
| 5 | V+ | power_in | Positive power supply. Operating voltage range 1.6 V to 5.5 V (relative to V-); absolute maximum 6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-5 |
| Category | Op-amp/Cmp |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
LPV521MGX
CAD (KiCad official)
- Symbol:
LPV521MGX - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files:
lpv521mgx-etched.step/lpv521mgx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lpv521mgx.step/lpv521mgx.glbare the bare package body.
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
lpv521mgx.step |
87 KB | You want the bare part, or you mark your own boards. |
lpv521mgx-etched.step |
1.5 MB | You want the part with LPV521MGX already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 380 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (34 pp, sha256
f34937791fe43f39, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LPV521MGX
**Texas Instruments** · Operational Amplifier · SC-70-5
LPV521MGX from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output. Rail-to-rail output, can source/sink ~1 mA (typ 3 mA) with output swing within ~2 mV of either supply rail into RL = 100 kΩ. |
| 2 | V- | power_in | Negative power supply (typically GND for single-supply operation). Total supply voltage V+ − V- must be 1.6 V to 5.5 V. |
| 3 | IN+ | input | Noninverting input. Rail-to-rail common-mode input range (0 V to V+); input bias current typically 40 fA. Must stay within V- − 0.3 V to V+ + 0.3 V. |
| 4 | IN- | input | Inverting input. Rail-to-rail common-mode input range (0 V to V+); input bias current typically 40 fA. Must stay within V- − 0.3 V to V+ + 0.3 V. |
| 5 | V+ | power_in | Positive power supply. Operating voltage range 1.6 V to 5.5 V (relative to V-); absolute maximum 6 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-5 |
| Category | Op-amp/Cmp |
| Pins | 5 |
## Ordering variants
Same part, different packaging or reel option.
- `LPV521MGX`
## CAD (KiCad official)
- Symbol: `LPV521MGX`
- Footprint: `Package_TO_SOT_SMD:SOT-353_SC-70-5`
- 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files: `lpv521mgx-etched.step` / `lpv521mgx-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lpv521mgx.step` / `lpv521mgx.glb` are the bare package body.
## 3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
| [`lpv521mgx.step`](lpv521mgx.step) | 87 KB | You want the bare part, or you mark your own boards. |
| [`lpv521mgx-etched.step`](lpv521mgx-etched.step) | 1.5 MB | You want the part with `LPV521MGX` already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a
texture or a decal: 380 faces against 102 in the bare model. It
survives export, section views, and rendering in any CAD tool, and it drops straight
into KiCad or Fusion with no extra setup.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lpv521mgx.pdf) (34 pp, sha256 `f34937791fe43f39`, retrieved 2026-08-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lpv521mgx-datasheet.pdf)