main
Ray
lpv358m: laser-etched CAD + chip hero (factory 2.0.0 backfill)
fd9e55b
LPV358M
HGSEMI · Operational Amplifier · SOP-8
LPV358M from HGSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Output of amplifier A. Rail-to-rail output; typically swings within 10 mV of the supply rail with RL > 500 kΩ. Short-circuit source/sink current approx. 58 mA typ. |
| 2 | INA- | input | Inverting input of amplifier A. High-impedance CMOS input with 1 pA typical bias current. Common-mode range extends from VSS-0.1 V to VDD+0.1 V. |
| 3 | INA+ | input | Non-inverting input of amplifier A. High-impedance CMOS input with 1 pA typical bias current. Rail-to-rail common-mode range (VSS-0.1 V to VDD+0.1 V). |
| 4 | VSS | power_in | Negative supply / ground. For single-supply operation tie to GND; for dual supply operation, connect to the negative rail (down to -2.75 V). Absolute max supply (VDD-VSS) is 7.5 V. |
| 5 | INB+ | input | Non-inverting input of amplifier B. High-impedance CMOS input with 1 pA typical bias current. Rail-to-rail common-mode range (VSS-0.1 V to VDD+0.1 V). |
| 6 | INB- | input | Inverting input of amplifier B. High-impedance CMOS input with 1 pA typical bias current. Common-mode range extends from VSS-0.1 V to VDD+0.1 V. |
| 7 | OUTB | output | Output of amplifier B. Rail-to-rail output; typically swings within 10 mV of the supply rail with RL > 500 kΩ. Short-circuit source/sink current approx. 58 mA typ. |
| 8 | VDD | power_in | Positive supply, 2.1 V to 5.5 V single-supply operation (or +1.05 V to +2.75 V for dual-supply). Bypass with a 0.1 µF ceramic capacitor placed close to the pin. Quiescent current 5.5 µA per amplifier typ. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SOP-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
Ordering variants
LPV358M/TRLPV358MM/TR
CAD (KiCad official)
- Symbol:
LPV358M - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
lpv358m-etched.step/lpv358m-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lpv358m.step/lpv358m.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (None pp, sha256
c638b83564e31b0d, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LPV358M
**HGSEMI** · Operational Amplifier · SOP-8
LPV358M from HGSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Output of amplifier A. Rail-to-rail output; typically swings within 10 mV of the supply rail with RL > 500 kΩ. Short-circuit source/sink current approx. 58 mA typ. |
| 2 | INA- | input | Inverting input of amplifier A. High-impedance CMOS input with 1 pA typical bias current. Common-mode range extends from VSS-0.1 V to VDD+0.1 V. |
| 3 | INA+ | input | Non-inverting input of amplifier A. High-impedance CMOS input with 1 pA typical bias current. Rail-to-rail common-mode range (VSS-0.1 V to VDD+0.1 V). |
| 4 | VSS | power_in | Negative supply / ground. For single-supply operation tie to GND; for dual supply operation, connect to the negative rail (down to -2.75 V). Absolute max supply (VDD-VSS) is 7.5 V. |
| 5 | INB+ | input | Non-inverting input of amplifier B. High-impedance CMOS input with 1 pA typical bias current. Rail-to-rail common-mode range (VSS-0.1 V to VDD+0.1 V). |
| 6 | INB- | input | Inverting input of amplifier B. High-impedance CMOS input with 1 pA typical bias current. Common-mode range extends from VSS-0.1 V to VDD+0.1 V. |
| 7 | OUTB | output | Output of amplifier B. Rail-to-rail output; typically swings within 10 mV of the supply rail with RL > 500 kΩ. Short-circuit source/sink current approx. 58 mA typ. |
| 8 | VDD | power_in | Positive supply, 2.1 V to 5.5 V single-supply operation (or +1.05 V to +2.75 V for dual-supply). Bypass with a 0.1 µF ceramic capacitor placed close to the pin. Quiescent current 5.5 µA per amplifier typ. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SOP-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
## Ordering variants
- `LPV358M/TR`
- `LPV358MM/TR`
## CAD (KiCad official)
- Symbol: `LPV358M`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `lpv358m-etched.step` / `lpv358m-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lpv358m.step` / `lpv358m.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HGSEMI datasheet](docs/lpv358m-datasheet.pdf) (None pp, sha256 `c638b83564e31b0d`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lpv358m-datasheet.pdf)