main
Ray
Publish 0.1.0
3e43e58
LPC804M101JDH24J
NXP Semicon · Microcontroller Units (MCUs/MPUs/SOCs) · TSSOP-24
LPC804M101JDH24J from NXP Semicon, in a TSSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PIO0_18 | bidirectional | General-purpose port 0 input/output 18, 5 V tolerant pad with high-current output driver, internal pull-up at reset. |
| 2 | PIO0_16/ACMP_I4/ADC_3 | bidirectional | General-purpose port 0 input/output 16 with analog comparator input 4 and ADC input 3, pull-up at reset. |
| 3 | PIO0_17/ADC_9 | bidirectional | General-purpose port 0 input/output 17 with ADC input 9, pull-up at reset; a WAKEUP pin for deep power-down. |
| 4 | PIO0_13/ADC_10 | bidirectional | General-purpose port 0 input/output 13 with ADC input 10, pull-up at reset; a WAKEUP pin for deep power-down. |
| 5 | PIO0_12 | bidirectional | General-purpose port 0 input/output 12 and ISP entry pin: a LOW level during reset starts the ISP command handler; high-current output pin. |
| 6 | RESET/PIO0_5 | input | External reset input where a LOW-going pulse as short as 50 ns resets the device; can be used as GPIO PIO0_5 or a movable function if reset is not needed. |
| 7 | PIO0_4/ADC_11/TRSTN | bidirectional | General-purpose port 0 input/output 4 with ADC input 11, U0_TXD in ISP mode (single supply) and TRST in boundary scan mode. |
| 8 | SWCLK/PIO0_3/TCK | input | Serial Wire Clock, enabled by default on this pin; also PIO0_3 GPIO (high-current output) and TCK in boundary scan mode. |
| 9 | SWDIO/PIO0_2/TMS | bidirectional | Serial Wire Debug I/O, enabled by default on this pin; also PIO0_2 GPIO (high-current output) and TMS in boundary scan mode. |
| 10 | PIO0_11/ADC_6/WKTCLKIN | bidirectional | General-purpose port 0 input/output 11 with ADC input 6 and external clock input for the self-wake-up timer; floating at reset. |
| 11 | PIO0_10/ADC_7 | bidirectional | General-purpose port 0 input/output 10 with ADC input 7; floating at reset and a WAKEUP pin. |
| 12 | PIO0_21/ACMP_I5 | bidirectional | General-purpose port 0 input/output 21 with analog comparator common input 5, pull-up at reset. |
| 13 | PIO0_20 | bidirectional | General-purpose port 0 input/output 20, 5 V tolerant pad with high-current output driver, pull-up at reset. |
| 14 | PIO0_15/ADC_8 | bidirectional | General-purpose port 0 input/output 15 with ADC input 8, pull-up at reset; a WAKEUP pin. |
| 15 | PIO0_1/ADC_0/ACMP_I2/TDI/CLKIN | bidirectional | General-purpose port 0 input/output 1 with analog comparator input 2, external clock input CLKIN and TDI in boundary scan mode. |
| 16 | PIO0_9/ADC_4 | bidirectional | General-purpose port 0 input/output 9 with ADC input 4; U0_TXD in ISP mode for dual supply devices; a WAKEUP pin. |
| 17 | PIO0_8/ADC_5 | bidirectional | General-purpose port 0 input/output 8 with ADC input 5; U0_RXD in ISP mode for dual supply devices; a WAKEUP pin. |
| 18 | VDD | power_in | Supply voltage for the I/Os and the core voltage regulator (single supply 1.71 V to 3.6 V). |
| 19 | VSS | power_in | Ground. |
| 20 | PIO0_7/ADC_1/ACMPVREF | bidirectional | General-purpose port 0 input/output 7 with ADC input 1 and alternate reference voltage ACMPVREF for the analog comparator. |
| 21 | VREFP | power_in | ADC positive reference voltage, must be equal or lower than VDD. |
| 22 | PIO0_0/ACMP_I1/TDO | bidirectional | General-purpose port 0 input/output 0 with analog comparator input 1; U0_RXD in ISP mode (single supply) and TDO in boundary scan mode. |
| 23 | PIO0_14/ACMP_I3/ADC_2 | bidirectional | General-purpose port 0 input/output 14 with analog comparator common input 3 and ADC input 2. |
| 24 | PIO0_19/DACOUT | bidirectional | General-purpose port 0 input/output 19 with DAC output, pull-up at reset. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | TSSOP-24 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 24 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute max) | VDD | -0.5 | 4.6 | V | core and external rail | 39 | |
| Reference voltage on VREFP | Vref | -0.5 | V | pin VREFP; max printed as VDD | 39 | ||
| Input voltage 5 V tolerant I/O | VI | -0.5 | 5.4 | V | 5 V tolerant I/O pins; VDD >= 1.71 V | 39 | |
| Analog input voltage on digital pins | VIA | -0.5 | 4.6 | V | digital pins configured for analog function | 39 | |
| Supply current per supply pin | IDD | 22 | mA | per supply pin (TSSOP24) | 39 | ||
| Ground current per ground pin | ISS | 45 | mA | per ground pin (TSSOP24) | 39 | ||
| I/O latch-up current | Ilatch | 100 | mA | (0.5VDD) < VI < (1.5VDD); Tj < 125 °C | 39 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 39 | ||
| Maximum junction temperature | Tj(max) | 150 | °C | 39 | |||
| Total power dissipation (package) | Ptot(pack) | 0.34 | W | TSSOP24; JEDEC (4.5 in x 4 in); still air | 40 | ||
| Total power dissipation (package) | Ptot(pack) | 0.26 | W | TSSOP24; single layer (4.5 in x 3 in); still air | 40 | ||
| ESD voltage | Vesd | 2000 | V | human body model; all pins | 40 | ||
| Clock frequency | fclk | 15 | MHz | internal CPU/system clock | 42 | ||
| Supply voltage | VDD | 1.71 | 3.6 | V | core and external rail | 42 | |
| Supply voltage for ADC operations | VDD | 2.5 | 3.6 | V | For ADC operations | 42 | |
| Supply voltage for DAC operations | VDD | 2.7 | 3.6 | V | For DAC operations | 42 | |
| ADC positive reference voltage | Vref | 2.5 | V | on pin VREFP; max printed as VDD | 42 | ||
| Operating ambient temperature | Tamb | -40 | 105 | °C | 42 | ||
| Input/output capacitance, analog and digital pins | Cio | 7.1 | pF | pins with analog and digital functions | 42 | ||
| Input/output capacitance, digital only | Cio | 2.8 | pF | pins with digital functions only | 42 | ||
| Deep-sleep supply current | IDD | 100 | 175 | µA | Deep-sleep mode; VDD = 3.3 V; Tamb = 25 °C | 43 | |
| Deep-sleep supply current | IDD | 240 | µA | Deep-sleep mode; VDD = 3.3 V; Tamb = 105 °C | 43 | ||
| Power-down supply current | IDD | 6 | 14 | µA | Power-down mode; VDD = 3.3 V; Tamb = 25 °C | 43 | |
| Power-down supply current | IDD | 75 | µA | Power-down mode; VDD = 3.3 V; Tamb = 105 °C | 43 | ||
| Deep power-down supply current | IDD | 0.15 | 0.5 | µA | Deep power-down mode; VDD = 3.3 V; Tamb = 25 °C | 43 | |
| Deep power-down supply current | IDD | 7 | µA | Deep power-down mode; VDD = 3.3 V; Tamb = 105 °C | 43 | ||
| Low-level input current | IIL | 0.5 | 10 | nA | VI = 0 V; on-chip pull-up resistor disabled | 47 | |
| High-level input current | IIH | 0.5 | 10 | nA | VI = VDD; on-chip pull-down resistor disabled | 47 | |
| OFF-state output current | IOZ | 0.5 | 10 | nA | VO = 0 V; VO = VDD; on-chip pull-up/down resistors disabled | 47 | |
| Input voltage | VI | 0 | 5.4 | V | VDD >= 1.71 V; 5 V tolerant pins except PIO0_7 | 47 | |
| HIGH-level input voltage | VIH | 0.7 | xVDD | 47 | |||
| LOW-level input voltage | VIL | 0.3 | xVDD | 47 | |||
| Hysteresis voltage | Vhys | 0.4 | V | 47 | |||
| LOW-level output voltage | VOL | 0.5 | V | IOL = 4 mA; 2.5 V <= VDD <= 3.6 V | 47 | ||
| HIGH-level output current | IOH | 4 | mA | 2.5 V <= VDD <= 3.6 V | 47 | ||
| HIGH-level output current | IOH | 3 | mA | 1.71 V <= VDD < 2.5 V | 47 | ||
| LOW-level output current | IOL | 4 | mA | VOL = 0.5 V; 2.5 V <= VDD <= 3.6 V | 47 | ||
| LOW-level output current | IOL | 3 | mA | VOL = 0.5 V; 1.71 V <= VDD < 2.5 V | 47 | ||
| HIGH-level short-circuit output current | IOHS | 45 | mA | VOH = 0 V | 47 | ||
| LOW-level short-circuit output current | IOLS | 50 | mA | VOL = VDD | 47 | ||
| Pull-down current | Ipd | 10 | 50 | 150 | µA | VI = 5 V | 47 |
| Pull-up current | Ipu | 10 | 50 | 90 | µA | VI = 0 V; 2.0 V <= VDD <= 3.6 V | 47 |
| Pull-up current | Ipu | 7 | 50 | 85 | µA | VI = 0 V; 1.71 V <= VDD < 2.0 V | 47 |
| Flash endurance | Nendu | 200000 | 500000 | cycles | 52 | ||
| Flash retention time, powered | tret | 10 | years | powered | 52 | ||
| Flash retention time, not powered | tret | 20 | years | not powered | 52 | ||
| Flash programming/erase time | tprog/ter | 2.5 | ms | page or sector; 64 bytes; Tamb <= +85 °C | 52 | ||
| FRO 12 MHz frequency tolerance | fosc(RC) | -3.5 | 2.5 | % | -40 °C <= Tamb <= 105 °C; 12 MHz | 53 | |
| FRO 12 MHz frequency tolerance | fosc(RC) | -1 | 1 | % | 0 °C <= Tamb <= 70 °C; 12 MHz | 53 | |
| LPOsc clock frequency tolerance | fosc(RC) | -3 | 3 | % | nominal 1 MHz | 53 | |
| Output rise time | tr | 3 | 5 | ns | pin configured as output; 3.0 V <= VDD <= 3.6 V | 53 | |
| Output fall time | tf | 2.5 | 5 | ns | pin configured as output; 3.0 V <= VDD <= 3.6 V | 53 | |
| Internal voltage reference output voltage | VO | 860 | 940 | mV | Tamb = 25 °C to 105 °C | 65 | |
| DAC output pin resistance | ROUT | 90 | 200 | Ω | PIO0_19/DACOUT_0 pin | 67 | |
| DAC output voltage range | VOUT | 0.175 | V | max printed as VDDA-0.175 | 67 | ||
| Thermal resistance junction-to-ambient | Rth(j-a) | 114 | °C/W | TSSOP24; JEDEC (4.5 in x 4 in); still air; ±15 % | 41 | ||
| Thermal resistance junction-to-ambient | Rth(j-a) | 153 | °C/W | TSSOP24; single-layer (4.5 in x 3 in); still air; ±15 % | 41 | ||
| Thermal resistance junction-to-case | Rth(j-c) | 31 | °C/W | TSSOP24; ±15 % | 41 |
CAD (KiCad official)
- Symbol:
LPC804M101JDH24J - Footprint:
Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm - 3D model: TSSOP-24 (KiCad packages3D, STEP)
- 3D model files:
lpc804m101jdh24j-etched.step/lpc804m101jdh24j-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lpc804m101jdh24j.step/lpc804m101jdh24j.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (90 pp, sha256
4be3cee5e8ceae1d, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LPC804M101JDH24J
**NXP Semicon** · Microcontroller Units (MCUs/MPUs/SOCs) · TSSOP-24
LPC804M101JDH24J from NXP Semicon, in a TSSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PIO0_18 | bidirectional | General-purpose port 0 input/output 18, 5 V tolerant pad with high-current output driver, internal pull-up at reset. |
| 2 | PIO0_16/ACMP_I4/ADC_3 | bidirectional | General-purpose port 0 input/output 16 with analog comparator input 4 and ADC input 3, pull-up at reset. |
| 3 | PIO0_17/ADC_9 | bidirectional | General-purpose port 0 input/output 17 with ADC input 9, pull-up at reset; a WAKEUP pin for deep power-down. |
| 4 | PIO0_13/ADC_10 | bidirectional | General-purpose port 0 input/output 13 with ADC input 10, pull-up at reset; a WAKEUP pin for deep power-down. |
| 5 | PIO0_12 | bidirectional | General-purpose port 0 input/output 12 and ISP entry pin: a LOW level during reset starts the ISP command handler; high-current output pin. |
| 6 | RESET/PIO0_5 | input | External reset input where a LOW-going pulse as short as 50 ns resets the device; can be used as GPIO PIO0_5 or a movable function if reset is not needed. |
| 7 | PIO0_4/ADC_11/TRSTN | bidirectional | General-purpose port 0 input/output 4 with ADC input 11, U0_TXD in ISP mode (single supply) and TRST in boundary scan mode. |
| 8 | SWCLK/PIO0_3/TCK | input | Serial Wire Clock, enabled by default on this pin; also PIO0_3 GPIO (high-current output) and TCK in boundary scan mode. |
| 9 | SWDIO/PIO0_2/TMS | bidirectional | Serial Wire Debug I/O, enabled by default on this pin; also PIO0_2 GPIO (high-current output) and TMS in boundary scan mode. |
| 10 | PIO0_11/ADC_6/WKTCLKIN | bidirectional | General-purpose port 0 input/output 11 with ADC input 6 and external clock input for the self-wake-up timer; floating at reset. |
| 11 | PIO0_10/ADC_7 | bidirectional | General-purpose port 0 input/output 10 with ADC input 7; floating at reset and a WAKEUP pin. |
| 12 | PIO0_21/ACMP_I5 | bidirectional | General-purpose port 0 input/output 21 with analog comparator common input 5, pull-up at reset. |
| 13 | PIO0_20 | bidirectional | General-purpose port 0 input/output 20, 5 V tolerant pad with high-current output driver, pull-up at reset. |
| 14 | PIO0_15/ADC_8 | bidirectional | General-purpose port 0 input/output 15 with ADC input 8, pull-up at reset; a WAKEUP pin. |
| 15 | PIO0_1/ADC_0/ACMP_I2/TDI/CLKIN | bidirectional | General-purpose port 0 input/output 1 with analog comparator input 2, external clock input CLKIN and TDI in boundary scan mode. |
| 16 | PIO0_9/ADC_4 | bidirectional | General-purpose port 0 input/output 9 with ADC input 4; U0_TXD in ISP mode for dual supply devices; a WAKEUP pin. |
| 17 | PIO0_8/ADC_5 | bidirectional | General-purpose port 0 input/output 8 with ADC input 5; U0_RXD in ISP mode for dual supply devices; a WAKEUP pin. |
| 18 | VDD | power_in | Supply voltage for the I/Os and the core voltage regulator (single supply 1.71 V to 3.6 V). |
| 19 | VSS | power_in | Ground. |
| 20 | PIO0_7/ADC_1/ACMPVREF | bidirectional | General-purpose port 0 input/output 7 with ADC input 1 and alternate reference voltage ACMPVREF for the analog comparator. |
| 21 | VREFP | power_in | ADC positive reference voltage, must be equal or lower than VDD. |
| 22 | PIO0_0/ACMP_I1/TDO | bidirectional | General-purpose port 0 input/output 0 with analog comparator input 1; U0_RXD in ISP mode (single supply) and TDO in boundary scan mode. |
| 23 | PIO0_14/ACMP_I3/ADC_2 | bidirectional | General-purpose port 0 input/output 14 with analog comparator common input 3 and ADC input 2. |
| 24 | PIO0_19/DACOUT | bidirectional | General-purpose port 0 input/output 19 with DAC output, pull-up at reset. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | TSSOP-24 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 24 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute max) | VDD | -0.5 | | 4.6 | V | core and external rail | 39 |
| Reference voltage on VREFP | Vref | -0.5 | | | V | pin VREFP; max printed as VDD | 39 |
| Input voltage 5 V tolerant I/O | VI | -0.5 | | 5.4 | V | 5 V tolerant I/O pins; VDD >= 1.71 V | 39 |
| Analog input voltage on digital pins | VIA | -0.5 | | 4.6 | V | digital pins configured for analog function | 39 |
| Supply current per supply pin | IDD | | | 22 | mA | per supply pin (TSSOP24) | 39 |
| Ground current per ground pin | ISS | | | 45 | mA | per ground pin (TSSOP24) | 39 |
| I/O latch-up current | Ilatch | | | 100 | mA | (0.5VDD) < VI < (1.5VDD); Tj < 125 °C | 39 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 39 |
| Maximum junction temperature | Tj(max) | | | 150 | °C | | 39 |
| Total power dissipation (package) | Ptot(pack) | | | 0.34 | W | TSSOP24; JEDEC (4.5 in x 4 in); still air | 40 |
| Total power dissipation (package) | Ptot(pack) | | | 0.26 | W | TSSOP24; single layer (4.5 in x 3 in); still air | 40 |
| ESD voltage | Vesd | | | 2000 | V | human body model; all pins | 40 |
| Clock frequency | fclk | | | 15 | MHz | internal CPU/system clock | 42 |
| Supply voltage | VDD | 1.71 | | 3.6 | V | core and external rail | 42 |
| Supply voltage for ADC operations | VDD | 2.5 | | 3.6 | V | For ADC operations | 42 |
| Supply voltage for DAC operations | VDD | 2.7 | | 3.6 | V | For DAC operations | 42 |
| ADC positive reference voltage | Vref | 2.5 | | | V | on pin VREFP; max printed as VDD | 42 |
| Operating ambient temperature | Tamb | -40 | | 105 | °C | | 42 |
| Input/output capacitance, analog and digital pins | Cio | | | 7.1 | pF | pins with analog and digital functions | 42 |
| Input/output capacitance, digital only | Cio | | | 2.8 | pF | pins with digital functions only | 42 |
| Deep-sleep supply current | IDD | | 100 | 175 | µA | Deep-sleep mode; VDD = 3.3 V; Tamb = 25 °C | 43 |
| Deep-sleep supply current | IDD | | | 240 | µA | Deep-sleep mode; VDD = 3.3 V; Tamb = 105 °C | 43 |
| Power-down supply current | IDD | | 6 | 14 | µA | Power-down mode; VDD = 3.3 V; Tamb = 25 °C | 43 |
| Power-down supply current | IDD | | | 75 | µA | Power-down mode; VDD = 3.3 V; Tamb = 105 °C | 43 |
| Deep power-down supply current | IDD | | 0.15 | 0.5 | µA | Deep power-down mode; VDD = 3.3 V; Tamb = 25 °C | 43 |
| Deep power-down supply current | IDD | | | 7 | µA | Deep power-down mode; VDD = 3.3 V; Tamb = 105 °C | 43 |
| Low-level input current | IIL | | 0.5 | 10 | nA | VI = 0 V; on-chip pull-up resistor disabled | 47 |
| High-level input current | IIH | | 0.5 | 10 | nA | VI = VDD; on-chip pull-down resistor disabled | 47 |
| OFF-state output current | IOZ | | 0.5 | 10 | nA | VO = 0 V; VO = VDD; on-chip pull-up/down resistors disabled | 47 |
| Input voltage | VI | 0 | | 5.4 | V | VDD >= 1.71 V; 5 V tolerant pins except PIO0_7 | 47 |
| HIGH-level input voltage | VIH | 0.7 | | | xVDD | | 47 |
| LOW-level input voltage | VIL | | | 0.3 | xVDD | | 47 |
| Hysteresis voltage | Vhys | | 0.4 | | V | | 47 |
| LOW-level output voltage | VOL | | | 0.5 | V | IOL = 4 mA; 2.5 V <= VDD <= 3.6 V | 47 |
| HIGH-level output current | IOH | 4 | | | mA | 2.5 V <= VDD <= 3.6 V | 47 |
| HIGH-level output current | IOH | 3 | | | mA | 1.71 V <= VDD < 2.5 V | 47 |
| LOW-level output current | IOL | 4 | | | mA | VOL = 0.5 V; 2.5 V <= VDD <= 3.6 V | 47 |
| LOW-level output current | IOL | 3 | | | mA | VOL = 0.5 V; 1.71 V <= VDD < 2.5 V | 47 |
| HIGH-level short-circuit output current | IOHS | | | 45 | mA | VOH = 0 V | 47 |
| LOW-level short-circuit output current | IOLS | | | 50 | mA | VOL = VDD | 47 |
| Pull-down current | Ipd | 10 | 50 | 150 | µA | VI = 5 V | 47 |
| Pull-up current | Ipu | 10 | 50 | 90 | µA | VI = 0 V; 2.0 V <= VDD <= 3.6 V | 47 |
| Pull-up current | Ipu | 7 | 50 | 85 | µA | VI = 0 V; 1.71 V <= VDD < 2.0 V | 47 |
| Flash endurance | Nendu | 200000 | 500000 | | cycles | | 52 |
| Flash retention time, powered | tret | 10 | | | years | powered | 52 |
| Flash retention time, not powered | tret | 20 | | | years | not powered | 52 |
| Flash programming/erase time | tprog/ter | | 2.5 | | ms | page or sector; 64 bytes; Tamb <= +85 °C | 52 |
| FRO 12 MHz frequency tolerance | fosc(RC) | -3.5 | | 2.5 | % | -40 °C <= Tamb <= 105 °C; 12 MHz | 53 |
| FRO 12 MHz frequency tolerance | fosc(RC) | -1 | | 1 | % | 0 °C <= Tamb <= 70 °C; 12 MHz | 53 |
| LPOsc clock frequency tolerance | fosc(RC) | -3 | | 3 | % | nominal 1 MHz | 53 |
| Output rise time | tr | 3 | | 5 | ns | pin configured as output; 3.0 V <= VDD <= 3.6 V | 53 |
| Output fall time | tf | 2.5 | | 5 | ns | pin configured as output; 3.0 V <= VDD <= 3.6 V | 53 |
| Internal voltage reference output voltage | VO | 860 | | 940 | mV | Tamb = 25 °C to 105 °C | 65 |
| DAC output pin resistance | ROUT | | 90 | 200 | Ω | PIO0_19/DACOUT_0 pin | 67 |
| DAC output voltage range | VOUT | 0.175 | | | V | max printed as VDDA-0.175 | 67 |
| Thermal resistance junction-to-ambient | Rth(j-a) | | 114 | | °C/W | TSSOP24; JEDEC (4.5 in x 4 in); still air; ±15 % | 41 |
| Thermal resistance junction-to-ambient | Rth(j-a) | | 153 | | °C/W | TSSOP24; single-layer (4.5 in x 3 in); still air; ±15 % | 41 |
| Thermal resistance junction-to-case | Rth(j-c) | | 31 | | °C/W | TSSOP24; ±15 % | 41 |
## CAD (KiCad official)
- Symbol: `LPC804M101JDH24J`
- Footprint: `Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm`
- 3D model: TSSOP-24 (KiCad packages3D, STEP)
- 3D model files: `lpc804m101jdh24j-etched.step` / `lpc804m101jdh24j-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lpc804m101jdh24j.step` / `lpc804m101jdh24j.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [NXP Semicon datasheet](https://www.nxp.com/docs/en/data-sheet/LPC804M101JDH24J.pdf) (90 pp, sha256 `4be3cee5e8ceae1d`, retrieved 2026-11-02, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lpc804m101jdh24j-datasheet.pdf)