3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLPC802M001JDH20FP
NXP Semicon · NXP MCU · TSSOP-20
LPC802M001JDH20FP from NXP Semicon, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PIO0_16/ADC_3/ACMP_I4 | bidirectional | General-purpose port 0 pin 16 that can also serve as analog comparator common input 4 or ADC input 3; default state is input with pull-up enabled. |
| 2 | PIO0_17/ADC_9 | bidirectional | General-purpose port 0 pin 17 that can also serve as ADC input 9; default state is input with pull-up enabled. |
| 3 | PIO0_13/ADC_10 | bidirectional | General-purpose port 0 pin 13 that can also serve as ADC input 10; default state is input with pull-up enabled. |
| 4 | PIO0_12 | bidirectional | General-purpose port 0 pin 12 and high-drive output pin; a LOW level on this pin during reset starts the ISP command handler. |
| 5 | RESET/PIO0_5 | bidirectional | External reset input where a LOW-going pulse as short as 50 ns resets the device; the pin can alternatively be used as GPIO or a movable function if external reset is not needed. |
| 6 | PIO0_4/ADC_11/TRSTN | bidirectional | General-purpose port 0 pin 4 that can also serve as ADC input 11 or JTAG TRST in boundary scan mode; it is the U0_TXD pin in ISP mode for single-supply devices. |
| 7 | SWCLK/PIO0_3/TCK | bidirectional | Serial Wire Clock input enabled by default on this pin, also general-purpose port 0 pin 3 and high-drive output, and TCK in boundary scan mode. |
| 8 | SWDIO/PIO0_2/TMS | bidirectional | Serial Wire Debug I/O enabled by default on this pin, also general-purpose port 0 pin 2 and high-drive output, and TMS in boundary scan mode. |
| 9 | PIO0_11/ADC_6/WKTCLKIN | bidirectional | General-purpose port 0 pin 11 that can also serve as ADC input 6 or as external clock input for the self-wake-up timer, which is active in sleep, deep-sleep and power-down modes. |
| 10 | PIO0_10/ADC_7 | bidirectional | General-purpose port 0 pin 10 that can also serve as ADC input 7. |
| 11 | PIO0_15/ADC_8 | bidirectional | General-purpose port 0 pin 15 that can also serve as ADC input 8. |
| 12 | PIO0_1/ADC_0/ACMP_I2/CLKIN/TDI | bidirectional | General-purpose port 0 pin 1 that can also serve as ADC input 0, analog comparator input 2, external clock input CLKIN, or TDI in boundary scan mode. |
| 13 | PIO0_9/ADC_4 | bidirectional | General-purpose port 0 pin 9 that can also serve as ADC input 4; it is the U0_TXD pin in ISP mode for dual-supply devices. |
| 14 | PIO0_8/ADC_5 | bidirectional | General-purpose port 0 pin 8 that can also serve as ADC input 5; it is the U0_RXD pin in ISP mode for dual-supply devices. |
| 15 | VDD | power_in | Supply voltage for the I/Os and core voltage regulator; on this single-supply variant it also supplies the I/Os on the left side of the package. |
| 16 | VSS | power_in | Ground. |
| 17 | PIO0_7/ADC_1/ACMPVREF | bidirectional | General-purpose port 0 pin 7 that can also serve as ADC input 1 or alternate reference voltage for the analog comparator. |
| 18 | VREFP | input | ADC positive reference voltage that must be equal to or lower than VDD. |
| 19 | PIO0_0/ACMP_I1/TDO | bidirectional | General-purpose port 0 pin 0 that can also serve as analog comparator input 1 or TDO in boundary scan mode; it is the U0_RXD pin in ISP mode for single-supply devices. |
| 20 | PIO0_14/ACMP_I3/ADC_2 | bidirectional | General-purpose port 0 pin 14 that can also serve as analog comparator common input 3 or ADC input 2. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | TSSOP-20 |
| Category | Embedded Processors & Controllers |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD supply voltage (core and external rail) | VDD | -0.5 | 4.6 | V | 34 | ||
| Reference voltage on pin VREFP | Vref | -0.5 | V | 34 | |||
| Input voltage, 5 V tolerant I/O pins | VI | -0.5 | 5.4 | V | 5 V tolerant I/O pins; VDD ≥ 1.71 V | 34 | |
| Input voltage, 3 V tolerant I/O pin ACMPVREF | VI | -0.5 | 3.6 | V | 3 V tolerant I/O pin ACMPVREF | 34 | |
| Analog input voltage on digital pins configured for an analog function | VIA | -0.5 | 4.6 | V | 34 | ||
| Supply current per supply pin (TSSOP20) | IDD | 40 | mA | per supply pin (TSSOP20) | 34 | ||
| Ground current per ground pin (TSSOP20) | ISS | 40 | mA | per ground pin (TSSOP20) | 34 | ||
| I/O latch-up current | Ilatch | 100 | mA | -(0.5VDD) < VI < (1.5VDD); Tj < 125 °C | 34 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 34 | ||
| Maximum junction temperature | Tj(max) | 150 | °C | 34 | |||
| Total power dissipation per package, TSSOP20, JEDEC | Ptot(pack) | 0.36 | W | TSSOP20, based on package heat transfer, not device power consumption; note [10] | 34 | ||
| Total power dissipation per package, TSSOP20, single-layer | Ptot(pack) | 0.26 | W | TSSOP20, based on package heat transfer, not device power consumption; note [11] | 34 | ||
| Electrostatic discharge voltage | Vesd | 2000 | V | human body model; all pins | 35 | ||
| Internal CPU/system clock frequency | fclk | 15 | MHz | internal CPU/system clock | 37 | ||
| Supply voltage (core and external rail) | VDD | 1.71 | 3.6 | V | 37 | ||
| Supply voltage, ADC operations | VDD | 2.5 | 3.6 | V | For ADC operations | 37 | |
| ADC positive reference voltage | Vref | 2.5 | V | on pin VREFP | 37 | ||
| Input/output pin capacitance, pins with analog and digital functions | Cio | 7.1 | pF | pins with analog and digital functions | 37 | ||
| Input/output pin capacitance, pins with digital functions only | Cio | 2.8 | pF | pins with digital functions only | 37 | ||
| Supply current, deep-sleep mode | IDD | 100 | 175 | μA | Deep-sleep mode; VDD = 3.3 V; Tamb = 25 °C | 38 | |
| Supply current, deep-sleep mode | IDD | 240 | μA | Tamb = 105 °C | 38 | ||
| Supply current, power-down mode | IDD | 6 | 14 | μA | Power-down mode; VDD = 3.3 V; Tamb = 25 °C | 38 | |
| Supply current, power-down mode | IDD | 75 | μA | Tamb = 105 °C | 38 | ||
| Supply current, deep power-down mode | IDD | 0.15 | 0.5 | μA | Deep power-down mode; VDD = 3.3 V; Tamb = 25 °C | 38 | |
| Supply current, deep power-down mode | IDD | 7 | μA | Tamb = 105 °C | 38 | ||
| FRO clock frequency tolerance, 12 MHz nominal | fosc(RC) | -1 | 1 | % | FRO clock frequency; Condition: 0 °C ≤ Tamb ≤ 70 °C | 47 | |
| FRO clock frequency tolerance, 12 MHz nominal | fosc(RC) | -2 | 1 | % | FRO clock frequency; Condition: -20 °C ≤ Tamb ≤ 70 °C | 47 | |
| FRO clock frequency tolerance, 12 MHz nominal | fosc(RC) | -3.5 | 2.5 | % | FRO clock frequency; Condition: -40 °C ≤ Tamb ≤ 105 °C | 47 | |
| LPOsc clock frequency tolerance, 1 MHz nominal | fosc(RC) | -3 | 3 | % | 47 | ||
| LOW-level input current, standard port pins | IIL | 0.5 | 10 | nA | VI = 0 V; on-chip pull-up resistor disabled | 41 | |
| HIGH-level input current, standard port pins | IIH | 0.5 | 10 | nA | VI = VDD; on-chip pull-down resistor disabled | 41 | |
| OFF-state output current, standard port pins | IOZ | 0.5 | 10 | nA | VO = 0 V; VO = VDD; on-chip pull-up/down resistors disabled | 41 | |
| Input voltage, standard 5 V tolerant pins | VI | 0 | 5.4 | V | VDD ≥ 1.71 V; 5 V tolerant pins except PIO0_7 | 41 | |
| LOW-level output voltage, standard port pins | VOL | 0.5 | V | IOL = 4 mA; 2.5 V <= VDD <= 3.6 V | 41 | ||
| HIGH-level output current, standard port pins | IOH | 4 | mA | VOH = VDD - 0.4 V; 2.5 V ≤ VDD ≤ 3.6 V | 42 | ||
| HIGH-level output current, standard port pins | IOH | 3 | mA | VOH = VDD - 0.5 V; 1.71 V ≤ VDD ≤ 2.5 V | 42 | ||
| LOW-level output current, standard port pins | IOL | 4 | mA | VOL = 0.5 V; 2.5 V ≤ VDD ≤ 3.6 V | 42 | ||
| LOW-level output current, standard port pins | IOL | 3 | mA | VOL = 0.5 V; 1.71 V ≤ VDD < 2.5 V | 42 | ||
| HIGH-level short-circuit output current, standard port pins | IOHS | 45 | mA | VOH = 0 V | 42 | ||
| LOW-level short-circuit output current, standard port pins | IOLS | 50 | mA | VOL = VDD | 42 | ||
| Pull-down current, standard port pins | Ipd | 10 | 50 | 150 | μA | VI = 5 V | 42 |
| Pull-down current, standard port pins | Ipd | 10 | 50 | 90 | μA | VI = 0 V; 2.0 V ≤ VDD ≤ 3.6 V | 42 |
| Pull-down current, standard port pins | Ipd | 7 | 50 | 85 | μA | VI = 0 V; 1.71 V ≤ VDD < 2.0 V | 42 |
| Pull-up current, standard port pins | Ipu | 0 | 0 | 0 | μA | VDD < VI < 5 V | 42 |
| High-drive pin HIGH-level output current (PIO0_2, PIO0_3, PIO0_12) | IOH | 20 | mA | VOH = VDD - 0.6 V; 2.5 V <= VDD < 3.6 V | 42 | ||
| Rise time, pin configured as output | tr | 3 | 5 | ns | pin configured as output | 48 | |
| Fall time, pin configured as output | tf | 2.5 | 5 | ns | pin configured as output | 48 | |
| WKTCLKIN clock frequency | fclk | 10 | MHz | power-down, deep-sleep, and active mode | 48 | ||
| WKTCLKIN clock HIGH time | tCHCX | 50 | ns | 48 | |||
| WKTCLKIN clock LOW time | tCLCX | 50 | ns | 48 | |||
| I2C SCL clock frequency | fSCL | 0 | 100 | kHz | Standard-mode | 48 | |
| I2C SCL clock frequency | fSCL | 0 | 400 | kHz | Fast-mode | 48 | |
| Flash endurance | Nendu | 200000 | 500000 | cycles | 47 | ||
| Junction-to-ambient thermal resistance tolerance, TSSOP20 JEDEC | Rth(j-a) | -15 | 15 | % | JEDEC (4.5 in × 4 in); still air | 36 | |
| Junction-to-ambient thermal resistance tolerance, TSSOP20 single-layer | Rth(j-a) | -15 | 15 | % | single-layer (4.5 in × 3 in); still air | 36 | |
| Junction-to-case thermal resistance tolerance, TSSOP20 | Rth(j-c) | -15 | 15 | % | 36 | ||
| Junction-to-ambient thermal resistance, TSSOP20 JEDEC | Rth(j-a) | 110 | °C/W | JEDEC (4.5 in × 4 in); still air | 36 | ||
| Junction-to-ambient thermal resistance, TSSOP20 single-layer | Rth(j-a) | 153 | °C/W | single-layer (4.5 in × 3 in); still air | 36 | ||
| Junction-to-case thermal resistance, TSSOP20 | Rth(j-c) | 22 | °C/W | 36 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LPC802M001JDH20FP - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20, generated on the KiCad land (body 4.4 x 6.5 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lpc802m001jdh20fp-etched.step/lpc802m001jdh20fp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lpc802m001jdh20fp.step/lpc802m001jdh20fp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (81 pp, sha256
5821d3c57fdb47bd, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).