component
LPC54113J128BD64QL
Public Made by Adomby adom
NXP Semicon NXP MCU, LQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
2c5886e
LPC54113J128BD64QL
NXP Semicon · NXP MCU · LQFP-64(10x10)
LPC54113J128BD64QL from NXP Semicon, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PIO0_23 | bidirectional | True open-drain I2C-bus pin (standard, Fast-mode and Fast-mode Plus) that needs an external pull-up for output, is high-impedance at reset, and is set to Flexcomm 1 I2C SCL in ISP mode. |
| 2 | PIO0_24 | bidirectional | True open-drain I2C-bus pin (standard, Fast-mode and Fast-mode Plus) that needs an external pull-up for output, is high-impedance at reset, and is set to Flexcomm 1 I2C SDA in ISP mode. |
| 3 | PIO0_25 | bidirectional | True open-drain I/O pin (I2C-bus compliant) that needs an external pull-up for output and is high-impedance at reset; alternate functions include Flexcomm 4 RTS/SCL/SSEL1 and Flexcomm 6 CTS/SDA/SSEL0. |
| 4 | PIO0_26 | bidirectional | True open-drain I/O pin (I2C-bus compliant) that needs an external pull-up for output and is high-impedance at reset; alternate functions include Flexcomm 4 CTS/SDA/SSEL0 and CTimer0 capture input 3. |
| 5 | USB_DP | bidirectional | USB0 full-speed bidirectional D+ line on a 5 V tolerant transparent analog pad, which must be externally pulled low in deep power-down mode if USB is not used. |
| 6 | USB_DM | bidirectional | USB0 full-speed bidirectional D- line on a 5 V tolerant transparent analog pad, which must be externally pulled low in deep power-down mode if USB is not used. |
| 7 | PIO1_16 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; alternate functions include PDM0 data input and Flexcomm 7 RTS/SCL/SSEL1. |
| 8 | VDD | power_in | Single 1.62 V to 3.6 V power supply that powers the internal digital functions and I/Os. |
| 9 | VSS | power_in | Ground. |
| 10 | PIO1_17 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; alternate functions include MCLK input/output for I2S or digital microphone and micro-tick timer capture input 3. |
| 11 | PIO0_29/ADC0_0 | bidirectional | General-purpose digital I/O that is ADC0 input channel 0 when the DIGIMODE bit is 0 in IOCON; in analog input mode the digital section is disabled and the pin is not 5 V tolerant. |
| 12 | PIO0_30/ADC0_1 | bidirectional | General-purpose digital I/O that is ADC0 input channel 1 when the DIGIMODE bit is 0 in IOCON; in analog input mode the digital section is disabled and the pin is not 5 V tolerant. |
| 13 | PIO0_31/ADC0_2 | bidirectional | General-purpose digital I/O that is ADC0 input channel 2 when the DIGIMODE bit is 0 in IOCON; it also invokes ISP mode after reset together with PIO0_4 and PIO1_6. |
| 14 | PIO1_0/ADC0_3 | bidirectional | General-purpose digital I/O that is ADC0 input channel 3 when the DIGIMODE bit is 0 in IOCON; alternate functions include PDM0 data input. |
| 15 | PIO1_1/ADC0_4 | bidirectional | General-purpose digital I/O that is ADC0 input channel 4 when the DIGIMODE bit is 0 in IOCON; alternate functions include SWO serial wire trace output. |
| 16 | PIO1_2/ADC0_5 | bidirectional | General-purpose digital I/O that is ADC0 input channel 5 when the DIGIMODE bit is 0 in IOCON; alternate functions include MCLK input/output for I2S or digital microphone. |
| 17 | PIO1_3/ADC0_6 | bidirectional | General-purpose digital I/O that is ADC0 input channel 6 when the DIGIMODE bit is 0 in IOCON; alternate functions include Flexcomm 3 SCK and CTimer0 capture input 1. |
| 18 | PIO1_4/ADC0_7 | bidirectional | General-purpose digital I/O that is ADC0 input channel 7 when the DIGIMODE bit is 0 in IOCON; alternate functions include PDM1 clock output. |
| 19 | PIO1_5/ADC0_8 | bidirectional | General-purpose digital I/O that is ADC0 input channel 8 when the DIGIMODE bit is 0 in IOCON; alternate functions include PDM1 data input and USB_FRAME output. |
| 20 | VSSA | power_in | Analog ground; tie to VSS. |
| 21 | VREFN | power_in | ADC negative reference voltage; tie to VSS if the ADC is not used. |
| 22 | VREFP | power_in | ADC positive reference voltage; tie to VDD if the ADC is not used. |
| 23 | VDDA | power_in | Analog supply voltage; tie to VDD if the ADC is not used. |
| 24 | VDD | power_in | Single 1.62 V to 3.6 V power supply that powers the internal digital functions and I/Os. |
| 25 | VSS | power_in | Ground. |
| 26 | PIO1_6/ADC0_9 | bidirectional | General-purpose digital I/O that is ADC0 input channel 9 when the DIGIMODE bit is 0 in IOCON; it is part of the secondary ISP boot source selection and also serves as USB_VBUS monitor input. |
| 27 | PIO1_7/ADC0_10 | bidirectional | General-purpose digital I/O that is ADC0 input channel 10 when the DIGIMODE bit is 0 in IOCON; alternate functions include Flexcomm 7 RXD/SDA/MOSI/I2S data. |
| 28 | PIO1_8/ADC0_11 | bidirectional | General-purpose digital I/O that is ADC0 input channel 11 when the DIGIMODE bit is 0 in IOCON; alternate functions include Flexcomm 7 TXD/SCL/MISO/I2S WS. |
| 29 | PIO1_9 | bidirectional | General-purpose digital I/O with internal pull-up at reset; alternate functions include Flexcomm 3 RXD/SDA/MOSI and USB_UP_LED output (LOW when configured). |
| 30 | PIO1_10 | bidirectional | General-purpose digital I/O with internal pull-up at reset; alternate functions include Flexcomm 6 TXD/SCL/MISO/I2S WS and SCT0 output 4. |
| 31 | PIO0_0 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; in ISP mode it is the Flexcomm 0 USART RXD function. |
| 32 | PIO0_1 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; in ISP mode it is the Flexcomm 0 USART TXD function. |
| 33 | RTCXIN | input | RTC oscillator input; connect to ground when the RTC oscillator is not used, which disables it. |
| 34 | VDD | power_in | Single 1.62 V to 3.6 V power supply that powers the internal digital functions and I/Os. |
| 35 | RTCXOUT | output | RTC oscillator output; can be left unconnected if not used. |
| 36 | PIO0_2 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; alternate functions include Flexcomm 0 CTS/SDA/SSEL0 and CTimer2 capture input 1. |
| 37 | PIO0_3 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; alternate functions include Flexcomm 0 RTS/SCL/SSEL1 and CTimer1 match output 3. |
| 38 | PIO0_4 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; together with PIO0_31 and PIO1_6 its reset state selects the boot source or invokes ISP. |
| 39 | PIO0_5 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; alternate functions include Flexcomm 6 RXD/SDA/MOSI/I2S data and SCT0 output 6. |
| 40 | PIO0_6 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; alternate functions include Flexcomm 6 TXD/SCL/MISO/I2S WS and CTimer0 match output 1. |
| 41 | PIO0_7 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; alternate functions include Flexcomm 6 SCK and SCT0 output 0. |
| 42 | PIO1_11 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; alternate functions include Flexcomm 6 RTS/SCL/SSEL1 and USB_VBUS input. |
| 43 | PIO0_8 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; alternate functions include Flexcomm 2 RXD/SDA/MOSI and SCT0 output 1. |
| 44 | PIO0_9 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; alternate functions include Flexcomm 2 TXD/SCL/MISO and SCT0 output 2. |
| 45 | PIO0_10 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; alternate functions include Flexcomm 2 SCK and SCT0 output 3. |
| 46 | PIO0_11 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; in ISP mode it is the Flexcomm 3 SPI SCK function. |
| 47 | PIO0_12 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; in ISP mode it is the Flexcomm 3 SPI MOSI function. |
| 48 | PIO0_13 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; in ISP mode it is the Flexcomm 3 SPI MISO function. |
| 49 | PIO0_14/TCK | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; in boundary scan mode it is the TCK test clock input. |
| 50 | PIO0_15/TDO | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; in boundary scan mode it is the TDO test data output and it also carries SWO serial wire trace output. |
| 51 | PIO1_12 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; alternate functions include Flexcomm 5 RXD/SDA/MOSI and UTICK capture input 2. |
| 52 | SWCLK/PIO0_16 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; SWCLK serial wire clock (JTAG test clock) is the default function after boot. |
| 53 | SWDIO/PIO0_17 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; SWDIO serial wire debug I/O is the default function after boot. |
| 54 | PIO1_13 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; alternate functions include Flexcomm 5 TXD/SCL/MISO and CTimer1 match output 1. |
| 55 | VSS | power_in | Ground. |
| 56 | VDD | power_in | Single 1.62 V to 3.6 V power supply that powers the internal digital functions and I/Os. |
| 57 | PIO1_14 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; alternate functions include Flexcomm 2 RXD/SDA/MOSI and SCT0 output 7. |
| 58 | PIO0_18/TRST | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; in boundary scan mode it is the TRST test reset input. |
| 59 | PIO0_19/TDI | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; in boundary scan mode it is the TDI test data input. |
| 60 | PIO0_20/TMS | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; in boundary scan mode it is the TMS test mode select input. |
| 61 | PIO0_21 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; alternate function is CLKOUT clock output. |
| 62 | PIO1_15 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; alternate functions include PDM0 clock output and SCT0 output 5. |
| 63 | PIO0_22 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; alternate function is CLKIN clock input. |
| 64 | RESETN | input | 5 V tolerant active-LOW external reset input with glitch filter that resets the device and wakes it from deep power-down mode. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | LQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| CPU/system clock frequency | fclk | 150 | MHz | internal CPU/system clock | 46 | ||
| Clock frequency for USB full-speed device operation | fclk | 12 | 150 | MHz | For USB full-speed device operation | 48 | |
| Supply voltage (core and external rail) | VDD | 1.62 | 3.6 | V | 48 | ||
| Supply voltage for USB operation | VDD | 3 | 3.6 | V | For USB operation only | 48 | |
| Analog supply voltage | VDDA | 1.62 | 3.6 | V | 48 | ||
| ADC positive reference voltage | Vrefp | 2 | V | VDDA 2 V (max printed as VDDA) | 48 | ||
| 32.768 kHz oscillator input voltage | Vi(rtcx) | -0.5 | 3.6 | V | on pin RTCXIN | 48 | |
| 32.768 kHz oscillator output voltage | Vo(rtcx) | -0.5 | 3.6 | V | on pin RTCXOUT | 48 | |
| Supply voltage (core and external rail) | VDD | -0.5 | 4.6 | V | on pin VDD | 46 | |
| Analog supply voltage | VDDA | -0.5 | 4.6 | V | on pin VDDA | 46 | |
| Reference voltage | Vref | -0.5 | 4.6 | V | on pin VREFP | 46 | |
| Input voltage 5 V tolerant I/O pins | VI | -0.5 | 5 | V | only valid when the VDD > 1.8 V; 5 V tolerant I/O pins | 46 | |
| Input voltage on I2C open-drain pins | VI | -0.5 | 5 | V | 46 | ||
| Input voltage USB_DM, USB_DP pins | VI | -0.5 | 5 | V | 46 | ||
| Analog input voltage on digital pins configured for an analog function | VIA | -0.5 | V | 46 | |||
| Total supply current per supply pin | IDD | 60 | mA | 46 | |||
| Total ground current per ground pin | ISS | 60 | mA | 46 | |||
| I/O latch-up current | Ilatch | 100 | mA | (0.5VDD) < VI < (1.5VDD); Tj < 125 C | 46 | ||
| 32.768 kHz oscillator input voltage | Vi(rtcx) | -0.5 | 4.6 | V | 46 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 46 | ||
| Maximum junction temperature | Tj(max) | 150 | °C | 46 | |||
| Total power dissipation (per package) | Ptot(pack) | 1.5 | W | based on package heat transfer, not device power consumption | 46 | ||
| Electrostatic discharge voltage (human body model) | VESD | 4000 | V | human body model; all pins | 46 | ||
| Thermal resistance junction to ambient, LQFP64, JEDEC board | Rth(j-a) | 58 | °C/W | JEDEC (4.5 in x 4 in); still air | 47 | ||
| Thermal resistance junction to ambient, LQFP64, single-layer board | Rth(j-a) | 81 | °C/W | Single-layer (4.5 in x 3 in); still air | 47 | ||
| Thermal resistance junction to case, LQFP64 | Rth(j-c) | 18 | °C/W | 47 | |||
| Thermal resistance tolerance (LQFP64 Rth values) | Rth | -15 | 15 | % | printed as 15 % on each LQFP64 Rth value | 47 | |
| Deep-sleep supply current, SRAM0 powered, 25 C | IDD | 10 | 17 | µA | 1.62 V ≤ VDD ≤ 2.0 V; deep-sleep, flash powered down; SRAM0 (64 KB) powered; Tamb = 25 C | 53 | |
| Deep-sleep supply current, SRAM0 powered, 105 C | IDD | 167 | µA | 1.62 V ≤ VDD ≤ 2.0 V; SRAM0 (64 KB) powered; Tamb = 105 C (printed value position unclear) | 53 | ||
| Deep power-down supply current, 25 C | IDD | 290 | 330 | nA | 1.62 V ≤ VDD ≤ 2.0 V; deep power-down; RTC oscillator input grounded; Tamb = 25 C | 53 | |
| Deep power-down supply current, 105 C | IDD | 6 | µA | 1.62 V ≤ VDD ≤ 2.0 V; deep power-down; Tamb = 105 C | 53 | ||
| Deep-sleep supply current, SRAM0 powered, 25 C | IDD | 12 | 19 | µA | 2.7 V ≤ VDD ≤ 3.6 V; deep-sleep, flash powered down; SRAM0 (64 KB) powered; Tamb = 25 C | 54 | |
| Deep-sleep supply current, SRAM0 powered, 105 C | IDD | 182 | µA | 2.7 V ≤ VDD ≤ 3.6 V; SRAM0 (64 KB) powered; Tamb = 105 C | 54 | ||
| Deep power-down supply current, 25 C | IDD | 360 | 470 | nA | 2.7 V ≤ VDD ≤ 3.6 V; deep power-down; RTC oscillator input grounded; Tamb = 25 C | 54 | |
| Deep power-down supply current, 105 C | IDD | 10 | µA | 2.7 V ≤ VDD ≤ 3.6 V; deep power-down; Tamb = 105 C | 54 | ||
| RESET HIGH-level input voltage | VIH | 5 | V | RESET pin | 57 | ||
| Input voltage, digital function | VI | 0 | 5 | V | pin configured to provide a digital function; VDD ≥ 1.8 V | 57 | |
| HIGH-level input voltage | VIH | 1.5 | 5 | V | 1.62 V ≤ VDD < 2.7 V | 57 | |
| HIGH-level input voltage | VIH | 2 | 5 | V | 2.7 V ≤ VDD ≤ 3.6 V | 57 | |
| LOW-level input voltage | VIL | -0.5 | 0.4 | V | 1.62 V ≤ VDD < 2.7 V | 57 | |
| LOW-level input voltage | VIL | -0.5 | 0.8 | V | 2.7 V ≤ VDD ≤ 3.6 V | 57 | |
| LOW-level input current | IIL | 3 | 180 | nA | VI = 0 V; on-chip pull-up resistor disabled | 57 | |
| HIGH-level input current | IIH | 3 | 180 | nA | VI = VDD; on-chip pull-down resistor disabled | 57 | |
| OFF-state output current | IOZ | 3 | 180 | nA | VO = 0 V; VO = VDD; on-chip pull-up/pull-down resistors disabled | 57 | |
| LOW-level output voltage | VOL | 0.4 | V | IOL = 4 mA; 1.62 V ≤ VDD < 2.7 V | 57 | ||
| HIGH-level output current | IOH | 4 | mA | VOH = VDD − 0.4 V; 1.62 V ≤ VDD < 2.7 V | 57 | ||
| HIGH-level output current | IOH | 6 | mA | VOH = VDD − 0.4 V; 2.7 V ≤ VDD ≤ 3.6 V | 57 | ||
| LOW-level output current | IOL | 4 | mA | VOL = 0.4 V; 1.62 V ≤ VDD < 2.7 V | 57 | ||
| LOW-level output current | IOL | 6 | mA | VOL = 0.4 V; 2.7 V ≤ VDD ≤ 3.6 V | 57 | ||
| HIGH-level short-circuit output current | IOHS | 35 | mA | drive HIGH; connected to ground; 1.62 V ≤ VDD < 2.7 V | 57 | ||
| HIGH-level short-circuit output current | IOHS | 87 | mA | drive HIGH; connected to ground; 2.7 V ≤ VDD ≤ 3.6 V | 57 | ||
| LOW-level short-circuit output current | IOLS | 30 | mA | drive LOW; connected to VDD; 1.62 V ≤ VDD < 2.7 V | 57 | ||
| LOW-level short-circuit output current | IOLS | 77 | mA | drive LOW; connected to VDD; 2.7 V ≤ VDD ≤ 3.6 V | 57 | ||
| Pull-up current | Ipu | 25 | 80 | µA | VI = 0 V | 58 | |
| Input capacitance, pins with digital functions only | Cio | 2 | pF | 59 | |||
| Input/output capacitance, I2C-bus pins | Cio | 6 | pF | 59 | |||
| FRO clock frequency | fosc(FRO) | 11.88 | 12 | 12.12 | MHz | Tamb = −40 °C to +105 °C; 1.62 V ≤ VDD ≤ 3.6 V | 66 |
| FRO clock frequency | fosc(FRO) | 47.52 | 48 | 48.48 | MHz | Tamb = −40 °C to +105 °C; 1.62 V ≤ VDD ≤ 3.6 V | 66 |
| FRO clock frequency | fosc(FRO) | 95.04 | 96 | 96.96 | MHz | Tamb = −40 °C to +105 °C; 1.62 V ≤ VDD ≤ 3.6 V | 66 |
CAD (KiCad official)
- Symbol:
LPC54113J128BD64QL - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
lpc54113j128bd64ql-etched.step/lpc54113j128bd64ql-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lpc54113j128bd64ql.step/lpc54113j128bd64ql.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (105 pp, sha256
be8688ae5e8fc957, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LPC54113J128BD64QL
**NXP Semicon** · NXP MCU · LQFP-64(10x10)
LPC54113J128BD64QL from NXP Semicon, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PIO0_23 | bidirectional | True open-drain I2C-bus pin (standard, Fast-mode and Fast-mode Plus) that needs an external pull-up for output, is high-impedance at reset, and is set to Flexcomm 1 I2C SCL in ISP mode. |
| 2 | PIO0_24 | bidirectional | True open-drain I2C-bus pin (standard, Fast-mode and Fast-mode Plus) that needs an external pull-up for output, is high-impedance at reset, and is set to Flexcomm 1 I2C SDA in ISP mode. |
| 3 | PIO0_25 | bidirectional | True open-drain I/O pin (I2C-bus compliant) that needs an external pull-up for output and is high-impedance at reset; alternate functions include Flexcomm 4 RTS/SCL/SSEL1 and Flexcomm 6 CTS/SDA/SSEL0. |
| 4 | PIO0_26 | bidirectional | True open-drain I/O pin (I2C-bus compliant) that needs an external pull-up for output and is high-impedance at reset; alternate functions include Flexcomm 4 CTS/SDA/SSEL0 and CTimer0 capture input 3. |
| 5 | USB_DP | bidirectional | USB0 full-speed bidirectional D+ line on a 5 V tolerant transparent analog pad, which must be externally pulled low in deep power-down mode if USB is not used. |
| 6 | USB_DM | bidirectional | USB0 full-speed bidirectional D- line on a 5 V tolerant transparent analog pad, which must be externally pulled low in deep power-down mode if USB is not used. |
| 7 | PIO1_16 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; alternate functions include PDM0 data input and Flexcomm 7 RTS/SCL/SSEL1. |
| 8 | VDD | power_in | Single 1.62 V to 3.6 V power supply that powers the internal digital functions and I/Os. |
| 9 | VSS | power_in | Ground. |
| 10 | PIO1_17 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; alternate functions include MCLK input/output for I2S or digital microphone and micro-tick timer capture input 3. |
| 11 | PIO0_29/ADC0_0 | bidirectional | General-purpose digital I/O that is ADC0 input channel 0 when the DIGIMODE bit is 0 in IOCON; in analog input mode the digital section is disabled and the pin is not 5 V tolerant. |
| 12 | PIO0_30/ADC0_1 | bidirectional | General-purpose digital I/O that is ADC0 input channel 1 when the DIGIMODE bit is 0 in IOCON; in analog input mode the digital section is disabled and the pin is not 5 V tolerant. |
| 13 | PIO0_31/ADC0_2 | bidirectional | General-purpose digital I/O that is ADC0 input channel 2 when the DIGIMODE bit is 0 in IOCON; it also invokes ISP mode after reset together with PIO0_4 and PIO1_6. |
| 14 | PIO1_0/ADC0_3 | bidirectional | General-purpose digital I/O that is ADC0 input channel 3 when the DIGIMODE bit is 0 in IOCON; alternate functions include PDM0 data input. |
| 15 | PIO1_1/ADC0_4 | bidirectional | General-purpose digital I/O that is ADC0 input channel 4 when the DIGIMODE bit is 0 in IOCON; alternate functions include SWO serial wire trace output. |
| 16 | PIO1_2/ADC0_5 | bidirectional | General-purpose digital I/O that is ADC0 input channel 5 when the DIGIMODE bit is 0 in IOCON; alternate functions include MCLK input/output for I2S or digital microphone. |
| 17 | PIO1_3/ADC0_6 | bidirectional | General-purpose digital I/O that is ADC0 input channel 6 when the DIGIMODE bit is 0 in IOCON; alternate functions include Flexcomm 3 SCK and CTimer0 capture input 1. |
| 18 | PIO1_4/ADC0_7 | bidirectional | General-purpose digital I/O that is ADC0 input channel 7 when the DIGIMODE bit is 0 in IOCON; alternate functions include PDM1 clock output. |
| 19 | PIO1_5/ADC0_8 | bidirectional | General-purpose digital I/O that is ADC0 input channel 8 when the DIGIMODE bit is 0 in IOCON; alternate functions include PDM1 data input and USB_FRAME output. |
| 20 | VSSA | power_in | Analog ground; tie to VSS. |
| 21 | VREFN | power_in | ADC negative reference voltage; tie to VSS if the ADC is not used. |
| 22 | VREFP | power_in | ADC positive reference voltage; tie to VDD if the ADC is not used. |
| 23 | VDDA | power_in | Analog supply voltage; tie to VDD if the ADC is not used. |
| 24 | VDD | power_in | Single 1.62 V to 3.6 V power supply that powers the internal digital functions and I/Os. |
| 25 | VSS | power_in | Ground. |
| 26 | PIO1_6/ADC0_9 | bidirectional | General-purpose digital I/O that is ADC0 input channel 9 when the DIGIMODE bit is 0 in IOCON; it is part of the secondary ISP boot source selection and also serves as USB_VBUS monitor input. |
| 27 | PIO1_7/ADC0_10 | bidirectional | General-purpose digital I/O that is ADC0 input channel 10 when the DIGIMODE bit is 0 in IOCON; alternate functions include Flexcomm 7 RXD/SDA/MOSI/I2S data. |
| 28 | PIO1_8/ADC0_11 | bidirectional | General-purpose digital I/O that is ADC0 input channel 11 when the DIGIMODE bit is 0 in IOCON; alternate functions include Flexcomm 7 TXD/SCL/MISO/I2S WS. |
| 29 | PIO1_9 | bidirectional | General-purpose digital I/O with internal pull-up at reset; alternate functions include Flexcomm 3 RXD/SDA/MOSI and USB_UP_LED output (LOW when configured). |
| 30 | PIO1_10 | bidirectional | General-purpose digital I/O with internal pull-up at reset; alternate functions include Flexcomm 6 TXD/SCL/MISO/I2S WS and SCT0 output 4. |
| 31 | PIO0_0 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; in ISP mode it is the Flexcomm 0 USART RXD function. |
| 32 | PIO0_1 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; in ISP mode it is the Flexcomm 0 USART TXD function. |
| 33 | RTCXIN | input | RTC oscillator input; connect to ground when the RTC oscillator is not used, which disables it. |
| 34 | VDD | power_in | Single 1.62 V to 3.6 V power supply that powers the internal digital functions and I/Os. |
| 35 | RTCXOUT | output | RTC oscillator output; can be left unconnected if not used. |
| 36 | PIO0_2 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; alternate functions include Flexcomm 0 CTS/SDA/SSEL0 and CTimer2 capture input 1. |
| 37 | PIO0_3 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; alternate functions include Flexcomm 0 RTS/SCL/SSEL1 and CTimer1 match output 3. |
| 38 | PIO0_4 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; together with PIO0_31 and PIO1_6 its reset state selects the boot source or invokes ISP. |
| 39 | PIO0_5 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; alternate functions include Flexcomm 6 RXD/SDA/MOSI/I2S data and SCT0 output 6. |
| 40 | PIO0_6 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; alternate functions include Flexcomm 6 TXD/SCL/MISO/I2S WS and CTimer0 match output 1. |
| 41 | PIO0_7 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; alternate functions include Flexcomm 6 SCK and SCT0 output 0. |
| 42 | PIO1_11 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; alternate functions include Flexcomm 6 RTS/SCL/SSEL1 and USB_VBUS input. |
| 43 | PIO0_8 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; alternate functions include Flexcomm 2 RXD/SDA/MOSI and SCT0 output 1. |
| 44 | PIO0_9 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; alternate functions include Flexcomm 2 TXD/SCL/MISO and SCT0 output 2. |
| 45 | PIO0_10 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; alternate functions include Flexcomm 2 SCK and SCT0 output 3. |
| 46 | PIO0_11 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; in ISP mode it is the Flexcomm 3 SPI SCK function. |
| 47 | PIO0_12 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; in ISP mode it is the Flexcomm 3 SPI MOSI function. |
| 48 | PIO0_13 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; in ISP mode it is the Flexcomm 3 SPI MISO function. |
| 49 | PIO0_14/TCK | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; in boundary scan mode it is the TCK test clock input. |
| 50 | PIO0_15/TDO | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; in boundary scan mode it is the TDO test data output and it also carries SWO serial wire trace output. |
| 51 | PIO1_12 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; alternate functions include Flexcomm 5 RXD/SDA/MOSI and UTICK capture input 2. |
| 52 | SWCLK/PIO0_16 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; SWCLK serial wire clock (JTAG test clock) is the default function after boot. |
| 53 | SWDIO/PIO0_17 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; SWDIO serial wire debug I/O is the default function after boot. |
| 54 | PIO1_13 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; alternate functions include Flexcomm 5 TXD/SCL/MISO and CTimer1 match output 1. |
| 55 | VSS | power_in | Ground. |
| 56 | VDD | power_in | Single 1.62 V to 3.6 V power supply that powers the internal digital functions and I/Os. |
| 57 | PIO1_14 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; alternate functions include Flexcomm 2 RXD/SDA/MOSI and SCT0 output 7. |
| 58 | PIO0_18/TRST | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; in boundary scan mode it is the TRST test reset input. |
| 59 | PIO0_19/TDI | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; in boundary scan mode it is the TDI test data input. |
| 60 | PIO0_20/TMS | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; in boundary scan mode it is the TMS test mode select input. |
| 61 | PIO0_21 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; alternate function is CLKOUT clock output. |
| 62 | PIO1_15 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; alternate functions include PDM0 clock output and SCT0 output 5. |
| 63 | PIO0_22 | bidirectional | General-purpose digital I/O with internal pull-up at reset and 5 V tolerance only while VDD is present; alternate function is CLKIN clock input. |
| 64 | RESETN | input | 5 V tolerant active-LOW external reset input with glitch filter that resets the device and wakes it from deep power-down mode. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | LQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| CPU/system clock frequency | fclk | | | 150 | MHz | internal CPU/system clock | 46 |
| Clock frequency for USB full-speed device operation | fclk | 12 | | 150 | MHz | For USB full-speed device operation | 48 |
| Supply voltage (core and external rail) | VDD | 1.62 | | 3.6 | V | | 48 |
| Supply voltage for USB operation | VDD | 3 | | 3.6 | V | For USB operation only | 48 |
| Analog supply voltage | VDDA | 1.62 | | 3.6 | V | | 48 |
| ADC positive reference voltage | Vrefp | 2 | | | V | VDDA 2 V (max printed as VDDA) | 48 |
| 32.768 kHz oscillator input voltage | Vi(rtcx) | -0.5 | | 3.6 | V | on pin RTCXIN | 48 |
| 32.768 kHz oscillator output voltage | Vo(rtcx) | -0.5 | | 3.6 | V | on pin RTCXOUT | 48 |
| Supply voltage (core and external rail) | VDD | -0.5 | | 4.6 | V | on pin VDD | 46 |
| Analog supply voltage | VDDA | -0.5 | | 4.6 | V | on pin VDDA | 46 |
| Reference voltage | Vref | -0.5 | | 4.6 | V | on pin VREFP | 46 |
| Input voltage 5 V tolerant I/O pins | VI | -0.5 | | 5 | V | only valid when the VDD > 1.8 V; 5 V tolerant I/O pins | 46 |
| Input voltage on I2C open-drain pins | VI | -0.5 | | 5 | V | | 46 |
| Input voltage USB_DM, USB_DP pins | VI | -0.5 | | 5 | V | | 46 |
| Analog input voltage on digital pins configured for an analog function | VIA | -0.5 | | | V | | 46 |
| Total supply current per supply pin | IDD | | | 60 | mA | | 46 |
| Total ground current per ground pin | ISS | | | 60 | mA | | 46 |
| I/O latch-up current | Ilatch | | | 100 | mA | (0.5VDD) < VI < (1.5VDD); Tj < 125 C | 46 |
| 32.768 kHz oscillator input voltage | Vi(rtcx) | -0.5 | | 4.6 | V | | 46 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 46 |
| Maximum junction temperature | Tj(max) | | | 150 | °C | | 46 |
| Total power dissipation (per package) | Ptot(pack) | | | 1.5 | W | based on package heat transfer, not device power consumption | 46 |
| Electrostatic discharge voltage (human body model) | VESD | | | 4000 | V | human body model; all pins | 46 |
| Thermal resistance junction to ambient, LQFP64, JEDEC board | Rth(j-a) | | | 58 | °C/W | JEDEC (4.5 in x 4 in); still air | 47 |
| Thermal resistance junction to ambient, LQFP64, single-layer board | Rth(j-a) | | | 81 | °C/W | Single-layer (4.5 in x 3 in); still air | 47 |
| Thermal resistance junction to case, LQFP64 | Rth(j-c) | | | 18 | °C/W | | 47 |
| Thermal resistance tolerance (LQFP64 Rth values) | Rth | -15 | | 15 | % | printed as 15 % on each LQFP64 Rth value | 47 |
| Deep-sleep supply current, SRAM0 powered, 25 C | IDD | | 10 | 17 | µA | 1.62 V ≤ VDD ≤ 2.0 V; deep-sleep, flash powered down; SRAM0 (64 KB) powered; Tamb = 25 C | 53 |
| Deep-sleep supply current, SRAM0 powered, 105 C | IDD | | | 167 | µA | 1.62 V ≤ VDD ≤ 2.0 V; SRAM0 (64 KB) powered; Tamb = 105 C (printed value position unclear) | 53 |
| Deep power-down supply current, 25 C | IDD | | 290 | 330 | nA | 1.62 V ≤ VDD ≤ 2.0 V; deep power-down; RTC oscillator input grounded; Tamb = 25 C | 53 |
| Deep power-down supply current, 105 C | IDD | | | 6 | µA | 1.62 V ≤ VDD ≤ 2.0 V; deep power-down; Tamb = 105 C | 53 |
| Deep-sleep supply current, SRAM0 powered, 25 C | IDD | | 12 | 19 | µA | 2.7 V ≤ VDD ≤ 3.6 V; deep-sleep, flash powered down; SRAM0 (64 KB) powered; Tamb = 25 C | 54 |
| Deep-sleep supply current, SRAM0 powered, 105 C | IDD | | | 182 | µA | 2.7 V ≤ VDD ≤ 3.6 V; SRAM0 (64 KB) powered; Tamb = 105 C | 54 |
| Deep power-down supply current, 25 C | IDD | | 360 | 470 | nA | 2.7 V ≤ VDD ≤ 3.6 V; deep power-down; RTC oscillator input grounded; Tamb = 25 C | 54 |
| Deep power-down supply current, 105 C | IDD | | | 10 | µA | 2.7 V ≤ VDD ≤ 3.6 V; deep power-down; Tamb = 105 C | 54 |
| RESET HIGH-level input voltage | VIH | | | 5 | V | RESET pin | 57 |
| Input voltage, digital function | VI | 0 | | 5 | V | pin configured to provide a digital function; VDD ≥ 1.8 V | 57 |
| HIGH-level input voltage | VIH | 1.5 | | 5 | V | 1.62 V ≤ VDD < 2.7 V | 57 |
| HIGH-level input voltage | VIH | 2 | | 5 | V | 2.7 V ≤ VDD ≤ 3.6 V | 57 |
| LOW-level input voltage | VIL | -0.5 | | 0.4 | V | 1.62 V ≤ VDD < 2.7 V | 57 |
| LOW-level input voltage | VIL | -0.5 | | 0.8 | V | 2.7 V ≤ VDD ≤ 3.6 V | 57 |
| LOW-level input current | IIL | | 3 | 180 | nA | VI = 0 V; on-chip pull-up resistor disabled | 57 |
| HIGH-level input current | IIH | | 3 | 180 | nA | VI = VDD; on-chip pull-down resistor disabled | 57 |
| OFF-state output current | IOZ | | 3 | 180 | nA | VO = 0 V; VO = VDD; on-chip pull-up/pull-down resistors disabled | 57 |
| LOW-level output voltage | VOL | | | 0.4 | V | IOL = 4 mA; 1.62 V ≤ VDD < 2.7 V | 57 |
| HIGH-level output current | IOH | 4 | | | mA | VOH = VDD − 0.4 V; 1.62 V ≤ VDD < 2.7 V | 57 |
| HIGH-level output current | IOH | 6 | | | mA | VOH = VDD − 0.4 V; 2.7 V ≤ VDD ≤ 3.6 V | 57 |
| LOW-level output current | IOL | 4 | | | mA | VOL = 0.4 V; 1.62 V ≤ VDD < 2.7 V | 57 |
| LOW-level output current | IOL | 6 | | | mA | VOL = 0.4 V; 2.7 V ≤ VDD ≤ 3.6 V | 57 |
| HIGH-level short-circuit output current | IOHS | | | 35 | mA | drive HIGH; connected to ground; 1.62 V ≤ VDD < 2.7 V | 57 |
| HIGH-level short-circuit output current | IOHS | | | 87 | mA | drive HIGH; connected to ground; 2.7 V ≤ VDD ≤ 3.6 V | 57 |
| LOW-level short-circuit output current | IOLS | | | 30 | mA | drive LOW; connected to VDD; 1.62 V ≤ VDD < 2.7 V | 57 |
| LOW-level short-circuit output current | IOLS | | | 77 | mA | drive LOW; connected to VDD; 2.7 V ≤ VDD ≤ 3.6 V | 57 |
| Pull-up current | Ipu | 25 | | 80 | µA | VI = 0 V | 58 |
| Input capacitance, pins with digital functions only | Cio | | | 2 | pF | | 59 |
| Input/output capacitance, I2C-bus pins | Cio | | | 6 | pF | | 59 |
| FRO clock frequency | fosc(FRO) | 11.88 | 12 | 12.12 | MHz | Tamb = −40 °C to +105 °C; 1.62 V ≤ VDD ≤ 3.6 V | 66 |
| FRO clock frequency | fosc(FRO) | 47.52 | 48 | 48.48 | MHz | Tamb = −40 °C to +105 °C; 1.62 V ≤ VDD ≤ 3.6 V | 66 |
| FRO clock frequency | fosc(FRO) | 95.04 | 96 | 96.96 | MHz | Tamb = −40 °C to +105 °C; 1.62 V ≤ VDD ≤ 3.6 V | 66 |
## CAD (KiCad official)
- Symbol: `LPC54113J128BD64QL`
- Footprint: `Package_QFP:LQFP-64_10x10mm_P0.5mm`
- 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files: `lpc54113j128bd64ql-etched.step` / `lpc54113j128bd64ql-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lpc54113j128bd64ql.step` / `lpc54113j128bd64ql.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [NXP Semicon datasheet](https://www.nxp.com/docs/en/data-sheet/LPC5411X.pdf) (105 pp, sha256 `be8688ae5e8fc957`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lpc54113j128bd64ql-datasheet.pdf)