main
Ray
Publish 0.1.0
77199a5
LPA2173SPF
LOWPOWER · Audio Power OpAmps · ESOP-8
LPA2173SPF from LOWPOWER, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BYP | passive | Bypass pin; connect a 0.22uF capacitor between this pin and GND. |
| 2 | MODE | input | Mode control pin: high voltage selects Class_D mode and low voltage selects Class_AB mode. |
| 3 | EQ | passive | EQ function pin; with resistor R2 and capacitor C2 in series between VIN and EQ, high frequencies can be attenuated. |
| 4 | VIN | power_in | Input of the amplifier; with resistor R1 and capacitor C1 in series between IN- and the signal, low frequencies can be attenuated. |
| 5 | VOP | output | Positive output of the signal. |
| 6 | VDD | power_in | Voltage supply pin; the electrical table gives the supply range as 2.3 V to 6.5 V. |
| 7 | VON | output | Negative output of the signal. |
| 8 | SD | input | Shutdown pin (stated as active high); the datasheet also says the SD pin can be left floating due to its internal pull-up. |
| 9 | GND | power_in | Ground pin, which is the exposed thermal PAD on the ESOP-8 package. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LOWPOWER |
| Package | ESOP-8 |
| Category | Amplifiers |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply power | VIN | 2.3 | 6.5 | V | 3 | ||
| Input voltage to GND | -0.3 | 7.5 | V | to GND | 2 | ||
| Other pin to GND | -0.3 | 6.5 | V | Other pin to GND | 2 | ||
| Lead temperature (soldering) | 260 | °C | Soldering, 10 sec. | 2 | |||
| Storage temperature range | -65 | 165 | °C | 2 | |||
| Operation junction temperature range | -40 | 125 | °C | 2 | |||
| Operation ambient temperature range | -40 | 85 | °C | 2 | |||
| Maximum power dissipation | PD | 2.6 | W | TA<40°C | 2 | ||
| Quiescent current | IQ | 4 | 6.8 | mA | VDD=5.0V No load | 3 | |
| Offset voltage | VOS | 1.1 | 2.5 | mV | VDD=5.0V, VSD =0V | 3 | |
| Power supply ripple rejection at 100 Hz | PSRR | 75 | dB | INPUT ac-grounded with CIN=0.47uF, VDD=6.0V f=100HZ | 3 | ||
| Power supply ripple rejection at 1 kHz | PSRR | 50 | dB | f=1KHz | 3 | ||
| Signal-to-noise ratio (Class_AB) | SNR | 91 | dB | VDD=5V,Class_AB f=1KHz | 3 | ||
| Signal-to-noise ratio (Class_D) | SNR | 90 | dB | VDD=5V,Class_D f=1KHz | 3 | ||
| Output noise | VN | 100 | μV | INPUT ac-grounded with | 3 | ||
| Efficiency | η | 84 | % | RL=4Ω, Po=3.2W f=1KHz | 3 | ||
| Shutdown current | ILEAK | 2 | uA | VSD =VDD=5.0V | 3 | ||
| Thermal resistance (junction to ambient) | 50 | °C/W | junction to ambient | 2 |
CAD (KiCad official)
- Symbol:
LPA2173SPF - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm - 3D model: ESOP-8 (KiCad packages3D, STEP)
- 3D model files:
lpa2173spf-etched.step/lpa2173spf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lpa2173spf.step/lpa2173spf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LOWPOWER datasheet (8 pp, sha256
71e4e3390a9a9e1f, retrieved 2026-11-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LPA2173SPF
**LOWPOWER** · Audio Power OpAmps · ESOP-8
LPA2173SPF from LOWPOWER, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BYP | passive | Bypass pin; connect a 0.22uF capacitor between this pin and GND. |
| 2 | MODE | input | Mode control pin: high voltage selects Class_D mode and low voltage selects Class_AB mode. |
| 3 | EQ | passive | EQ function pin; with resistor R2 and capacitor C2 in series between VIN and EQ, high frequencies can be attenuated. |
| 4 | VIN | power_in | Input of the amplifier; with resistor R1 and capacitor C1 in series between IN- and the signal, low frequencies can be attenuated. |
| 5 | VOP | output | Positive output of the signal. |
| 6 | VDD | power_in | Voltage supply pin; the electrical table gives the supply range as 2.3 V to 6.5 V. |
| 7 | VON | output | Negative output of the signal. |
| 8 | SD | input | Shutdown pin (stated as active high); the datasheet also says the SD pin can be left floating due to its internal pull-up. |
| 9 | GND | power_in | Ground pin, which is the exposed thermal PAD on the ESOP-8 package. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LOWPOWER |
| Package | ESOP-8 |
| Category | Amplifiers |
| Pins | 9 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply power | VIN | 2.3 | | 6.5 | V | | 3 |
| Input voltage to GND | | -0.3 | | 7.5 | V | to GND | 2 |
| Other pin to GND | | -0.3 | | 6.5 | V | Other pin to GND | 2 |
| Lead temperature (soldering) | | | | 260 | °C | Soldering, 10 sec. | 2 |
| Storage temperature range | | -65 | | 165 | °C | | 2 |
| Operation junction temperature range | | -40 | | 125 | °C | | 2 |
| Operation ambient temperature range | | -40 | | 85 | °C | | 2 |
| Maximum power dissipation | PD | | | 2.6 | W | TA<40°C | 2 |
| Quiescent current | IQ | | 4 | 6.8 | mA | VDD=5.0V No load | 3 |
| Offset voltage | VOS | | 1.1 | 2.5 | mV | VDD=5.0V, VSD =0V | 3 |
| Power supply ripple rejection at 100 Hz | PSRR | | 75 | | dB | INPUT ac-grounded with CIN=0.47uF, VDD=6.0V f=100HZ | 3 |
| Power supply ripple rejection at 1 kHz | PSRR | | 50 | | dB | f=1KHz | 3 |
| Signal-to-noise ratio (Class_AB) | SNR | | 91 | | dB | VDD=5V,Class_AB f=1KHz | 3 |
| Signal-to-noise ratio (Class_D) | SNR | | 90 | | dB | VDD=5V,Class_D f=1KHz | 3 |
| Output noise | VN | | 100 | | μV | INPUT ac-grounded with | 3 |
| Efficiency | η | | 84 | | % | RL=4Ω, Po=3.2W f=1KHz | 3 |
| Shutdown current | ILEAK | | 2 | | uA | VSD =VDD=5.0V | 3 |
| Thermal resistance (junction to ambient) | | | 50 | | °C/W | junction to ambient | 2 |
## CAD (KiCad official)
- Symbol: `LPA2173SPF`
- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm`
- 3D model: ESOP-8 (KiCad packages3D, STEP)
- 3D model files: `lpa2173spf-etched.step` / `lpa2173spf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lpa2173spf.step` / `lpa2173spf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [LOWPOWER datasheet](docs/lpa2173spf-datasheet.pdf) (8 pp, sha256 `71e4e3390a9a9e1f`, retrieved 2026-11-05, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lpa2173spf-datasheet.pdf)