Generated by kicad-footprint-generator · KiCad file format 20260206
LPA2110ASPF
LOWPOWER · Audio Power OpAmps · ESOP-8
LPA2110ASPF from LOWPOWER, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CTRL | input | Shutdown and Class AB / Class D mode select input. Shutdown: 0-0.6V; Class AB: 0.7-1V; Class D: 1.5V-VDD. Absolute max on this pin is -0.3V to 9V. |
| 2 | NC | unconnected | No connection. Leave floating or tie per PCB convention. |
| 3 | IN+ | input | Positive (non-inverting) analog audio input of the amplifier. AC-coupled through input capacitor Ci (typ. 0.22µF) and series input resistor Ri (typ. 27kΩ). Absolute max -0.3V to 9V. |
| 4 | IN- | input | Negative (inverting) analog audio input of the amplifier. AC-coupled through input capacitor Ci (typ. 0.22µF) and series input resistor Ri (typ. 27kΩ). Absolute max -0.3V to 9V. |
| 5 | OUT+ | output | Positive BTL speaker output. Drives one side of the 4Ω/8Ω load; delivers up to 25W into 4Ω at VDD=14.5V. Route to speaker via optional ferrite bead / LC filter for EMI control. |
| 6 | VDD | power_in | Main supply voltage input, 4V to 15.5V operating range (absolute max 18V). Decouple with 1µF ceramic close to pin plus bulk 100µF (or ≥470µF) electrolytic near the device. |
| 7 | GND | power_in | Signal/analog ground reference. Keep separated from high-current power ground path (thermal pad) to avoid interference; join at a single point. |
| 8 | OUT- | output | Negative BTL speaker output. Drives the opposite side of the 4Ω/8Ω load, 180° out of phase from OUT+. Route to speaker via optional ferrite bead / LC filter for EMI control. |
| 9 | Thermal PAD | power_in | Exposed thermal pad on the underside of the ESOP-8 package. Serves as power ground and primary heat-sink; must be soldered to the PCB copper pour with multiple vias (≥6) for proper thermal performance and reliability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LOWPOWER |
| Package | ESOP-8 |
| Category | Op-amp/Cmp |
| Pins | 9 |
Ordering variants
LPA2110ASPF
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply power | VDD | 4 | 15.5 | V | 3 | ||
| Shutdown voltage | VCTRL_SD | 0 | 0.6 | V | VDD=12V | 3 | |
| Class AB voltage | VCTRL_AB | 0.7 | 1 | V | VDD=12V | 3 | |
| Class D voltage | VCTRL_D | 1.5 | V | VDD=12V | 3 | ||
| Feedback resistor Rf tolerance (Class AB) | Rf | -10 | 10 | % | Class AB | 6 | |
| Feedback resistor Rf tolerance (Class D) | Rf | -10 | 10 | % | Class D | 6 | |
| Supply Voltage to GND | -0.3 | 18 | V | 2 | |||
| Other Pin to GND | -0.3 | 9 | V | 2 | |||
| Operating Ambient Temperature Range (Ta) | Ta | -40 | 85 | ℃ | 2 | ||
| Maximum Junction Temperature | 155 | °C | 2 | ||||
| Maximum Soldering Temperature (at leads) | 260 | °C | at leads, 10 sec | 2 | |||
| Maximum Power Dissipation (ESOP-8) | PD | 1.9 | W | TA=25°C | 2 | ||
| ESD HBM (Human Body Model) | 2 | KV | 2 | ||||
| ESD MM (Machine Model) | 200 | V | 2 | ||||
| Output power, THD+N=10%, f=1KHz, RL=4Ω, VDD=15V | PO | 29 | W | THD+N=10%, f=1KHz, RL=4Ω, VDD=15V | 3 | ||
| Output power, THD+N=10%, f=1KHz, RL=4Ω, VDD=12V | PO | 19 | W | THD+N=10%, f=1KHz, RL=4Ω, VDD=12V | 3 | ||
| Output power, THD+N=10%, f=1KHz, RL=8Ω, VDD=15V | PO | 16 | W | THD+N=10%, f=1KHz, RL=8Ω, VDD=15V | 3 | ||
| Output power, THD+N=10%, f=1KHz, RL=8Ω, VDD=12V | PO | 10 | W | THD+N=10%, f=1KHz, RL=8Ω, VDD=12V | 3 | ||
| Output power, THD+N=1%, f=1KHz, RL=4Ω, VDD=15V | PO | 24 | W | THD+N=1%, f=1KHz, RL=4Ω, VDD=15V | 3 | ||
| Output power, THD+N=1%, f=1KHz, RL=4Ω, VDD=12V | PO | 15 | W | THD+N=1%, f=1KHz, RL=4Ω, VDD=12V | 3 | ||
| Output power, THD+N=1%, f=1KHz, RL=8Ω, VDD=15V | PO | 13 | W | THD+N=1%, f=1KHz, RL=8Ω, VDD=15V | 3 | ||
| Output power, THD+N=1%, f=1KHz, RL=8Ω, VDD=12V | PO | 8.5 | W | THD+N=1%, f=1KHz, RL=8Ω, VDD=12V | 3 | ||
| Power supply ripple rejection, f=100Hz | PSRR | -70 | dB | INPUT ac-grounded with CIN=0.47uF, VDD=12V, f=100HZ | 3 | ||
| Power supply ripple rejection, f=1KHz | PSRR | -73 | dB | INPUT ac-grounded with CIN=0.47uF, VDD=12V, f=1KHz | 3 | ||
| Signal-to-noise ratio | SNR | 95 | dB | VDD=12V, POUT=12W, RL=4Ω, f=1KHz | 3 | ||
| Output integrated noise | Vn | 130 | μV | 22 Hz to 20kHz, A-weighted filter, THD=1%, RL=4Ω | 3 | ||
| Efficiency | η | 86 | % | RL=4Ω, PO=10W, f=1KHz | 3 | ||
| Quiescent current | IQ | 25 | mA | VDD=12V, No load | 3 | ||
| Shutdown current | ISD | 12 | uA | VDD=12V, VSD=0 | 3 | ||
| Offset output voltage | /VOS/ | 6 | mV | VDD=12V, VSD=0V | 3 | ||
| Oscillator frequency | fOSC | 550 | KHz | 3 | |||
| Start-up time | Ton | 180 | ms | SD from low to high | 3 | ||
| Thermal shutdown threshold | OTP | 155 | ℃ | Threshold | 3 | ||
| Thermal shutdown hysteresis | OTPH | 135 | ℃ | Hysteresis | 3 | ||
| Feedback resistor Rf (Class AB) | Rf | 100 | kΩ | Class AB | 6 | ||
| Feedback resistor Rf (Class D) | Rf | 250 | kΩ | Class D | 6 | ||
| Thermal Resistance (ESOP-8) | JA | 65 | ℃/W | 2 |
CAD (KiCad official)
- Symbol:
LPA2110ASPF - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm - 3D model: ESOP-8 (KiCad packages3D, STEP)
- 3D model files:
lpa2110aspf-etched.step/lpa2110aspf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lpa2110aspf.step/lpa2110aspf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LOWPOWER datasheet (None pp, sha256
d0ba7197e112dadf, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).