← Commit history
lpa2110aspf: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+80−1
page.json+80−1@@ -31,5 +31,84 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "LPA2110ASPF",+ "manufacturer": "LOWPOWER",+ "package": "ESOP-8",+ "pin_count": 9,+ "category": "Audio Power OpAmps",+ "parts": {+ "symbol": "lpa2110aspf.kicad_sym",+ "footprint": "lpa2110aspf.kicad_mod",+ "model_3d": "lpa2110aspf-etched.glb",+ "model_3d_plain": "lpa2110aspf.glb",+ "model_3d_step": "lpa2110aspf-etched.step",+ "model_3d_step_plain": "lpa2110aspf.step",+ "lbr": "lpa2110aspf.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "CTRL",+ "type": "input",+ "description": "Shutdown and Class AB / Class D mode select input. Shutdown: 0-0.6V; Class AB: 0.7-1V; Class D: 1.5V-VDD. Absolute max on this pin is -0.3V to 9V."+ },+ {+ "number": "2",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection. Leave floating or tie per PCB convention."+ },+ {+ "number": "3",+ "name": "IN+",+ "type": "input",+ "description": "Positive (non-inverting) analog audio input of the amplifier. AC-coupled through input capacitor Ci (typ. 0.22µF) and series input resistor Ri (typ. 27kΩ). Absolute max -0.3V to 9V."+ },+ {+ "number": "4",+ "name": "IN-",+ "type": "input",+ "description": "Negative (inverting) analog audio input of the amplifier. AC-coupled through input capacitor Ci (typ. 0.22µF) and series input resistor Ri (typ. 27kΩ). Absolute max -0.3V to 9V."+ },+ {+ "number": "5",+ "name": "OUT+",+ "type": "output",+ "description": "Positive BTL speaker output. Drives one side of the 4Ω/8Ω load; delivers up to 25W into 4Ω at VDD=14.5V. Route to speaker via optional ferrite bead / LC filter for EMI control."+ },+ {+ "number": "6",+ "name": "VDD",+ "type": "power_in",+ "description": "Main supply voltage input, 4V to 15.5V operating range (absolute max 18V). Decouple with 1µF ceramic close to pin plus bulk 100µF (or ≥470µF) electrolytic near the device."+ },+ {+ "number": "7",+ "name": "GND",+ "type": "power_in",+ "description": "Signal/analog ground reference. Keep separated from high-current power ground path (thermal pad) to avoid interference; join at a single point."+ },+ {+ "number": "8",+ "name": "OUT-",+ "type": "output",+ "description": "Negative BTL speaker output. Drives the opposite side of the 4Ω/8Ω load, 180° out of phase from OUT+. Route to speaker via optional ferrite bead / LC filter for EMI control."+ },+ {+ "number": "9",+ "name": "Thermal PAD",+ "type": "power_in",+ "description": "Exposed thermal pad on the underside of the ESOP-8 package. Serves as power ground and primary heat-sink; must be soldered to the PCB copper pour with multiple vias (≥6) for proper thermal performance and reliability."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}