main
Ray lpa2104asof: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 885cb64
{
  "schema_version": 1,
  "type": "component",
  "slug": "lpa2104asof",
  "title": "LPA2104ASOF",
  "brief": "LOWPOWER Audio Power OpAmps, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "op-amp-cmp",
    "lpa2104asof"
  ],
  "component": {
    "mpn": "LPA2104ASOF",
    "manufacturer": "LOWPOWER",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "Op-amp/Cmp",
    "subcategory": "Audio Power OpAmps",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/2078703d14a15c550f562edda4f5dc29.pdf",
    "parts": {
      "symbol": "lpa2104asof.kicad_sym",
      "footprint": "lpa2104asof.kicad_mod",
      "model_3d": "lpa2104asof-etched.glb",
      "model_3d_plain": "lpa2104asof.glb",
      "model_3d_step": "lpa2104asof-etched.step",
      "model_3d_step_plain": "lpa2104asof.step",
      "lbr": "lpa2104asof.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "SD",
        "type": "input",
        "description": "Shutdown pin, active high. Drive above VSD_H (min 1.2 V at VDD=5 V) to enable the amplifier; drive below VSD_L (max 0.6 V) or to GND to place the device in shutdown (ILEAK ≈ 0.1 µA)."
      },
      {
        "number": "2",
        "name": "BYP",
        "type": "passive",
        "description": "Analog reference bypass pin, biased internally to approximately VDD/2. Connect a 1 µF ceramic capacitor from this pin to GND; the capacitor sets start-up time and improves PSRR/THD+N."
      },
      {
        "number": "3",
        "name": "INP",
        "type": "input",
        "description": "Positive audio input of the amplifier. AC-couple through Ci (typ 0.22 µF) and series input resistor Ri (typ 20 kΩ) forming a high-pass filter with the internal input resistance; used differentially with INN or single-ended (tie the unused side to a Ci to GND)."
      },
      {
        "number": "4",
        "name": "INN",
        "type": "input",
        "description": "Negative audio input of the amplifier. AC-couple through Ci (typ 0.22 µF) and Ri (typ 20 kΩ). For single-ended input, still AC-couple this pin to signal ground through Ci/Ri."
      },
      {
        "number": "5",
        "name": "VOP",
        "type": "output",
        "description": "Positive (non-inverting) Class-D BTL output. Connect directly to one speaker terminal; no LC output filter is required for speaker leads ≤ ~100 mm. Optionally add a ferrite bead + 1 nF to GND for EMI reduction."
      },
      {
        "number": "6",
        "name": "VDD",
        "type": "power_in",
        "description": "Positive supply input, 2.5 V to 5.5 V operating (6.0 V absolute max). Decouple with 1 µF ceramic close to the pin and a bulk 22 µF capacitor nearby."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground return for supply, bias reference, and output stage. Connect to a solid ground plane; keep decoupling and bypass capacitors close to this pin."
      },
      {
        "number": "8",
        "name": "VON",
        "type": "output",
        "description": "Negative (inverting) Class-D BTL output, 180° out of phase with VOP. Connect directly to the other speaker terminal; drives 4 Ω / 8 Ω loads with up to 3 W (10% THD, 5 V, 4 Ω)."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/2078703d14a15c550f562edda4f5dc29.pdf",
        "pages": 9,
        "sha256": "79283b1d6b548b63",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lpa2104asof.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lpa2104asof-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "9ea15a4c1b58af5ce5b14ab639ba91c2c869e1cb85cdb76842377eeed6408102",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "LOWPOWER",
      "Package": "SOP-8",
      "Category": "Op-amp/Cmp",
      "Pins": "8"
    }
  },
  "variants": [
    {
      "mpn": "LPA2104ASOF",
      "kind": "packaging"
    }
  ],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "lpa2104asof"
  ],
  "discovery_pitch": "LPA2104ASOF (LOWPOWER) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lpa2104asof.kicad_sym",
    "lpa2104asof.kicad_mod",
    "lpa2104asof.glb",
    "lpa2104asof.step",
    "lpa2104asof.lbr",
    "docs/hero.png",
    "docs/lpa2104asof-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-28T18:02:10.078Z"
}