main
History Download
Ray lpa2104asof: laser-etched CAD + chip hero (factory 2.0.0 backfill) 19e591e

LPA2104ASOF

LOWPOWER · Audio Power OpAmps · SOP-8

LPA2104ASOF from LOWPOWER, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SD input Shutdown pin, active high. Drive above VSD_H (min 1.2 V at VDD=5 V) to enable the amplifier; drive below VSD_L (max 0.6 V) or to GND to place the device in shutdown (ILEAK ≈ 0.1 µA).
2 BYP passive Analog reference bypass pin, biased internally to approximately VDD/2. Connect a 1 µF ceramic capacitor from this pin to GND; the capacitor sets start-up time and improves PSRR/THD+N.
3 INP input Positive audio input of the amplifier. AC-couple through Ci (typ 0.22 µF) and series input resistor Ri (typ 20 kΩ) forming a high-pass filter with the internal input resistance; used differentially with INN or single-ended (tie the unused side to a Ci to GND).
4 INN input Negative audio input of the amplifier. AC-couple through Ci (typ 0.22 µF) and Ri (typ 20 kΩ). For single-ended input, still AC-couple this pin to signal ground through Ci/Ri.
5 VOP output Positive (non-inverting) Class-D BTL output. Connect directly to one speaker terminal; no LC output filter is required for speaker leads ≤ ~100 mm. Optionally add a ferrite bead + 1 nF to GND for EMI reduction.
6 VDD power_in Positive supply input, 2.5 V to 5.5 V operating (6.0 V absolute max). Decouple with 1 µF ceramic close to the pin and a bulk 22 µF capacitor nearby.
7 GND power_in Device ground return for supply, bias reference, and output stage. Connect to a solid ground plane; keep decoupling and bypass capacitors close to this pin.
8 VON output Negative (inverting) Class-D BTL output, 180° out of phase with VOP. Connect directly to the other speaker terminal; drives 4 Ω / 8 Ω loads with up to 3 W (10% THD, 5 V, 4 Ω).

Key specifications

Parameter Value
Manufacturer LOWPOWER
Package SOP-8
Category Op-amp/Cmp
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • LPA2104ASOF

CAD (KiCad official)

  • Symbol: LPA2104ASOF
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: lpa2104asof-etched.step / lpa2104asof-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lpa2104asof.step / lpa2104asof.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: LOWPOWER datasheet (9 pp, sha256 79283b1d6b548b63, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF