main
Ray Publish 0.1.0 17a9a56
{
  "slug": "lp8864sqrhbrq1",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments LED Drivers, VQFN-32(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "nixie tube driver-led driver",
    "lp8864sqrhbrq1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lp8864sqrhbrq1.kicad_sym",
    "lp8864sqrhbrq1.kicad_mod",
    "lp8864sqrhbrq1.glb",
    "lp8864sqrhbrq1.step",
    "lp8864sqrhbrq1.lbr",
    "docs/hero.png",
    "docs/lp8864sqrhbrq1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lp8864sqrhbrq1-hero.glb",
    "lp8864sqrhbrq1-hero.overlay.json",
    "lp8864sqrhbrq1-etched.glb"
  ],
  "component": {
    "mpn": "LP8864SQRHBRQ1",
    "manufacturer": "Texas Instruments",
    "package": "VQFN-32(5x5)",
    "pin_count": 33,
    "category": "Nixie Tube Driver/LED Driver",
    "subcategory": "LED Drivers",
    "datasheet": "https://www.ti.com/lit/ds/symlink/lp8864sqrhbrq1.pdf",
    "parts": {
      "symbol": "lp8864sqrhbrq1.kicad_sym",
      "footprint": "lp8864sqrhbrq1.kicad_mod",
      "model_3d": "lp8864sqrhbrq1-hero.glb",
      "model_3d_plain": "lp8864sqrhbrq1-etched.glb",
      "model_3d_step": "lp8864sqrhbrq1-etched.step",
      "model_3d_step_plain": "lp8864sqrhbrq1.step",
      "lbr": "lp8864sqrhbrq1.lbr"
    },
    "distributor_links": {
      "lcsc": "C2864835",
      "digikey": "296-LP8864SQRHBRQ1TR-ND",
      "mouser": "595-LP8864SQRHBRQ1"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T16:45:48Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-LP8864SQRHBRQ1TR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-LP8864SQRHBRQ1",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "LED_GND",
        "type": "power_in",
        "description": "LED ground connection."
      },
      {
        "number": "2",
        "name": "LED_GND",
        "type": "power_in",
        "description": "LED ground connection."
      },
      {
        "number": "3",
        "name": "OUT4",
        "type": "passive",
        "description": "LED current sink output; tie to ground if unused, and the recommended range for OUT1 to OUT4 is 0 to 48 V."
      },
      {
        "number": "4",
        "name": "LED_GND",
        "type": "power_in",
        "description": "LED ground connection."
      },
      {
        "number": "5",
        "name": "OUT3",
        "type": "passive",
        "description": "LED current sink output; tie to ground if unused, and the recommended range for OUT1 to OUT4 is 0 to 48 V."
      },
      {
        "number": "6",
        "name": "OUT2",
        "type": "passive",
        "description": "LED current sink output; tie to ground if unused, and the recommended range for OUT1 to OUT4 is 0 to 48 V."
      },
      {
        "number": "7",
        "name": "OUT1",
        "type": "passive",
        "description": "LED current sink output; tie to ground if unused, and the recommended range for OUT1 to OUT4 is 0 to 48 V."
      },
      {
        "number": "8",
        "name": "INT",
        "type": "output",
        "description": "Device fault interrupt output, open drain; a 10-kΩ pullup resistor is recommended."
      },
      {
        "number": "9",
        "name": "SDA",
        "type": "bidirectional",
        "description": "SDA for I2C interface; a 10-kΩ pullup resistor is recommended, and the absolute maximum on this pin is VDD + 0.3 V."
      },
      {
        "number": "10",
        "name": "SCL",
        "type": "bidirectional",
        "description": "SCL for I2C interface; a 10-kΩ pullup resistor is recommended, and the absolute maximum on this pin is VDD + 0.3 V."
      },
      {
        "number": "11",
        "name": "BST_SYNC",
        "type": "input",
        "description": "Input for synchronizing boost; connect to ground to disable spread spectrum or to VDD to enable it when synchronization is not used."
      },
      {
        "number": "12",
        "name": "PWM",
        "type": "input",
        "description": "PWM input for brightness control; tie to GND if unused."
      },
      {
        "number": "13",
        "name": "SGND",
        "type": "power_in",
        "description": "Signal ground."
      },
      {
        "number": "14",
        "name": "LED_SET",
        "type": "passive",
        "description": "LED string configuration through external resistor; do not leave floating."
      },
      {
        "number": "15",
        "name": "PWM_FSET",
        "type": "passive",
        "description": "LED dimming frequency setup through external resistor; do not leave floating."
      },
      {
        "number": "16",
        "name": "BST_FSET",
        "type": "passive",
        "description": "Boost switching frequency setup through external resistor; do not leave floating."
      },
      {
        "number": "17",
        "name": "MODE",
        "type": "passive",
        "description": "Dimming mode setup through external resistor; do not leave floating."
      },
      {
        "number": "18",
        "name": "UVLO",
        "type": "passive",
        "description": "Input voltage sense for programming the input UVLO threshold through an external resistor to VIN."
      },
      {
        "number": "19",
        "name": "VSENSE_P",
        "type": "passive",
        "description": "Input voltage detection for OVP protection and positive input for input current sense; recommended range is 3 to 48 V."
      },
      {
        "number": "20",
        "name": "VSENSE_N",
        "type": "passive",
        "description": "Negative input for input current sense; tie to VSENSE_P if input current sense is not used."
      },
      {
        "number": "21",
        "name": "SD",
        "type": "output",
        "description": "Power line FET control, open-drain output; leave floating if unused."
      },
      {
        "number": "22",
        "name": "VDD",
        "type": "power_in",
        "description": "Power supply input for internal analog and digital circuits; connect a 10-µF capacitor to GND, with recommended range 3 to 5.5 V."
      },
      {
        "number": "23",
        "name": "EN",
        "type": "input",
        "description": "Enable input."
      },
      {
        "number": "24",
        "name": "C1N",
        "type": "passive",
        "description": "Negative input for charge pump flying capacitor; leave floating if the feature is not used."
      },
      {
        "number": "25",
        "name": "C1P",
        "type": "passive",
        "description": "Positive input for charge pump flying capacitor; leave floating if the feature is not used."
      },
      {
        "number": "26",
        "name": "CPUMP",
        "type": "power_out",
        "description": "Charge pump output; connect to VDD if the charge pump is not used, and a 4.7-µF decoupling capacitor is recommended."
      },
      {
        "number": "27",
        "name": "GD",
        "type": "output",
        "description": "Gate driver output for external N-FET."
      },
      {
        "number": "28",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground."
      },
      {
        "number": "29",
        "name": "ISNS",
        "type": "passive",
        "description": "Boost current sense pin; recommended range is 0 to 5.5 V."
      },
      {
        "number": "30",
        "name": "ISNSGND",
        "type": "power_in",
        "description": "Current sense resistor GND."
      },
      {
        "number": "31",
        "name": "ISET",
        "type": "passive",
        "description": "LED full-scale current setup through external resistor."
      },
      {
        "number": "32",
        "name": "FB",
        "type": "passive",
        "description": "Boost feedback input; recommended range is 0 to 48 V."
      },
      {
        "number": "33",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pinout taken from the QFN (RHB, 32-pin) Pin Functions table 5-2 on page 5, since the MPN LP8864SQRHB; The datasheet labels most pins only as 'Analog', so KiCad types were assigned from each pin's stated; The thermal pad is listed as DAP (LED_GND) in table 5-2. It is not a numbered pin, so it is kept und"
        ],
        "pages_sent": 10,
        "cost_usd": 0.0247,
        "at": "2026-10-28T16:45:37"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/lp8864sqrhbrq1.pdf",
        "pages": 88,
        "sha256": "58ec6541568213fa",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 33,
        "described": 33,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lp8864sqrhbrq1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.0,
          5.0,
          0.875
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "5fa713ea46b36980895812ed853577889b7cb06d275041a39b99bc0be305dc79",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lp8864sqrhbrq1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.0,
          5.0,
          0.875
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "4411578534c5007849d0a7c7d766bf3cbac8931b24d4e3a8a1407611df6d4cfc",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}