LP87332DRHDR

{
  "slug": "lp87332drhdr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments DC-DC Converters, VQFN-28-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "lp87332drhdr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lp87332drhdr.kicad_sym",
    "lp87332drhdr.kicad_mod",
    "lp87332drhdr.glb",
    "lp87332drhdr.step",
    "lp87332drhdr.lbr",
    "docs/hero.png",
    "docs/lp87332drhdr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lp87332drhdr-hero.glb",
    "lp87332drhdr-hero.overlay.json"
  ],
  "component": {
    "mpn": "LP87332DRHDR",
    "manufacturer": "Texas Instruments",
    "package": "VQFN-28-EP(5x5)",
    "pin_count": 29,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/cn/lit/gpn/lp87332d",
    "parts": {
      "symbol": "lp87332drhdr.kicad_sym",
      "footprint": "lp87332drhdr.kicad_mod",
      "model_3d": "lp87332drhdr-hero.glb",
      "model_3d_plain": "lp87332drhdr.glb",
      "model_3d_step": "lp87332drhdr-etched.step",
      "model_3d_step_plain": "lp87332drhdr.step",
      "lbr": "lp87332drhdr.lbr"
    },
    "distributor_links": {
      "lcsc": "C701977",
      "digikey": "LP87332DRHDR-ND",
      "mouser": "595-LP87332DRHDR"
    },
    "distributor_check": {
      "checked_at": "2026-10-07T01:44:12Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "LP87332DRHDR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-LP87332DRHDR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VOUT_LDO0",
        "type": "power_out",
        "description": "LDO0 output. If the LDO0 is not used, leave the pin floating."
      },
      {
        "number": "2",
        "name": "FB_B0",
        "type": "passive",
        "description": "Output voltage feedback (positive) for Buck 0."
      },
      {
        "number": "3",
        "name": "FB_B1",
        "type": "passive",
        "description": "Output voltage feedback (positive) for Buck 1."
      },
      {
        "number": "4",
        "name": "AGND",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "5",
        "name": "VANA",
        "type": "power_in",
        "description": "Supply voltage for analog and digital blocks. Must be connected to same node with VIN_Bx."
      },
      {
        "number": "6",
        "name": "EN",
        "type": "input",
        "description": "Programmable enable signal for regulators and GPOs. If the pin is not used, leave the pin floating."
      },
      {
        "number": "7",
        "name": "VOUT_LDO1",
        "type": "power_out",
        "description": "LDO1 output. If LDO1 is not used, leave the pin floating."
      },
      {
        "number": "8",
        "name": "VIN_LDO1",
        "type": "power_in",
        "description": "Power input for LDO1. If LDO1 is not used, connect the pin to VANA."
      },
      {
        "number": "9",
        "name": "nINT",
        "type": "output",
        "description": "Open-drain interrupt output. Active LOW. If the pin is not used, connect the pin to ground."
      },
      {
        "number": "10",
        "name": "CLKIN",
        "type": "bidirectional",
        "description": "External clock input. Alternative function is general-purpose digital output (GPO2). If the pin is not used, leave the pin floating."
      },
      {
        "number": "11",
        "name": "VIN_B1",
        "type": "power_in",
        "description": "Input for Buck 1. The separate power pins VIN_Bx are not connected together internally - VIN_Bx pins must be connected together in the application and be locally bypassed."
      },
      {
        "number": "12",
        "name": "VIN_B1",
        "type": "power_in",
        "description": "Input for Buck 1. The separate power pins VIN_Bx are not connected together internally - VIN_Bx pins must be connected together in the application and be locally bypassed."
      },
      {
        "number": "13",
        "name": "SW_B1",
        "type": "power_out",
        "description": "Buck 1 switch node. If the Buck 1 is not used, leave the pin floating."
      },
      {
        "number": "14",
        "name": "SW_B1",
        "type": "power_out",
        "description": "Buck 1 switch node. If the Buck 1 is not used, leave the pin floating."
      },
      {
        "number": "15",
        "name": "PGND_B1",
        "type": "power_in",
        "description": "Power ground for Buck 1."
      },
      {
        "number": "16",
        "name": "PGND_B1",
        "type": "power_in",
        "description": "Power ground for Buck 1."
      },
      {
        "number": "17",
        "name": "SCL",
        "type": "input",
        "description": "Serial interface clock input for I2C access. Connect a pullup resistor. If the I2C interface is not used, connect the pin to Ground."
      },
      {
        "number": "18",
        "name": "SDA",
        "type": "bidirectional",
        "description": "Serial interface data input and output for I2C access. Connect a pullup resistor. If the I2C interface is not used, connect the pin to Ground."
      },
      {
        "number": "19",
        "name": "SGND",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "20",
        "name": "PGND_B0",
        "type": "power_in",
        "description": "Power ground for Buck 0."
      },
      {
        "number": "21",
        "name": "PGND_B0",
        "type": "power_in",
        "description": "Power ground for Buck 0."
      },
      {
        "number": "22",
        "name": "SW_B0",
        "type": "power_out",
        "description": "Buck 0 switch node. If the Buck 0 is not used, leave the pin floating."
      },
      {
        "number": "23",
        "name": "SW_B0",
        "type": "power_out",
        "description": "Buck 0 switch node. If the Buck 0 is not used, leave the pin floating."
      },
      {
        "number": "24",
        "name": "VIN_B0",
        "type": "power_in",
        "description": "Input for Buck 0. The separate power pins VIN_Bx are not connected together internally - VIN_Bx pins must be connected together in the application and be locally bypassed."
      },
      {
        "number": "25",
        "name": "VIN_B0",
        "type": "power_in",
        "description": "Input for Buck 0. The separate power pins VIN_Bx are not connected together internally - VIN_Bx pins must be connected together in the application and be locally bypassed."
      },
      {
        "number": "26",
        "name": "GPO",
        "type": "output",
        "description": "General-purpose digital output. If the pin is not used, leave the pin floating."
      },
      {
        "number": "27",
        "name": "PGOOD",
        "type": "output",
        "description": "Power-good indication signal. If the pin is not used, leave the pin floating."
      },
      {
        "number": "28",
        "name": "VIN_LDO0",
        "type": "power_in",
        "description": "Power input for LDO0. If the LDO0 is not used, connect the pin to VANA."
      },
      {
        "number": "29",
        "name": "THERMAL PAD",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Thermal pad present in VQFN-28-EP package. Datasheet specifies: 'Connect to PCB ground plane using m",
          "exposed pad 29 added from the footprint"
        ],
        "pages_sent": 17,
        "cost_usd": 0.1979,
        "at": "2026-10-07T01:43:56"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/lp87332d",
        "pages": 79,
        "sha256": "bc13eccf64169b1b",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 29,
        "described": 29,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lp87332drhdr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.0,
          5.0,
          0.92
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "e9d6d740f505b03e5aa0ac826330f9e269344b84656d051f50eb07ac162749eb",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lp87332drhdr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.0,
          5.0,
          0.92
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "02fc5d216be2bb82d2c7029a703782964b2ecc47a4e5e034118e97a3694e3d2d",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}