main
Ray lp7801tspf: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 2bc592e
{
  "slug": "lp7801tspf",
  "version": "0.1.0",
  "type": "component",
  "description": "LOWPOWER Battery Management, ESOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "pmic",
    "lp7801tspf"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lp7801tspf.kicad_sym",
    "lp7801tspf.kicad_mod",
    "lp7801tspf.glb",
    "lp7801tspf.step",
    "lp7801tspf.lbr",
    "docs/hero.png",
    "docs/lp7801tspf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lp7801tspf-etched.step"
  ],
  "visibility": {
    "public": true
  },
  "author": {
    "name": "Ray"
  },
  "component": {
    "mpn": "LP7801TSPF",
    "manufacturer": "LOWPOWER",
    "package": "ESOP-8",
    "pin_count": 9,
    "category": "Battery Management",
    "parts": {
      "symbol": "lp7801tspf.kicad_sym",
      "footprint": "lp7801tspf.kicad_mod",
      "model_3d": "lp7801tspf-etched.glb",
      "model_3d_plain": "lp7801tspf.glb",
      "model_3d_step": "lp7801tspf-etched.step",
      "model_3d_step_plain": "lp7801tspf.step",
      "lbr": "lp7801tspf.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "ISET",
        "type": "input",
        "description": "Charging current programming pin. Connect a resistor from ISET to GND to set the constant-current charging current per ICC = 1750 × VISET/RISET where VISET = 1 V (e.g. RISET = 17.5 kΩ → 100 mA; RISET = 3.4 kΩ → 515 mA)."
      },
      {
        "number": "2",
        "name": "VIN",
        "type": "power_in",
        "description": "Linear charger input supply. Recommended operating range 4.5 V to 5.8 V; tolerates up to 36 V absolute maximum. Input over-voltage protection threshold is 6.3 V (rising) with 400 mV hysteresis; UVLO is 3.3 V. Decouple with a 1 µF capacitor to GND."
      },
      {
        "number": "3",
        "name": "BAT",
        "type": "bidirectional",
        "description": "Linear charger output to the Li-ion battery and input to the boost converter. Regulates to VFLOAT = 4.20 V (LP7801TSPF) or 4.35 V (LP7801TSPF-435). Charging current up to 1 A; auto-recharge threshold VFLOAT − 150 mV. Decouple with 10 µF capacitor to GND."
      },
      {
        "number": "4",
        "name": "SW",
        "type": "output",
        "description": "Switching node of the synchronous boost converter. Connect a 2.2 µH inductor from BAT to SW. Absolute maximum −0.3 V to +9 V. Switch current limit typ. 1 A; high-side/low-side MOS RON ≈ 160 mΩ/220 mΩ."
      },
      {
        "number": "5",
        "name": "VOUT",
        "type": "power_out",
        "description": "Regulated boost converter output, fixed 5.1 V (Typ.), up to 500 mA. Decouple with 2 × 10 µF ceramic capacitors to GND. Discharged through an internal 2 kΩ resistor to 0 V when EN is low."
      },
      {
        "number": "6",
        "name": "EN",
        "type": "input",
        "description": "Active-high enable input for the boost converter. VIH ≥ 1.4 V enables the converter, VIL ≤ 0.4 V disables it and engages the 2 kΩ output discharge. Leakage 0.01 µA at VEN = 5 V."
      },
      {
        "number": "7",
        "name": "CHRG",
        "type": "output",
        "description": "Open-drain charge status indicator, capable of driving an LED. Strong pull-down (~10 mA sink, VOL ≤ 0.5 V at 5 mA) during a charge cycle; high impedance when the cycle terminates or when VIN is below 4.5 V / above the OVP threshold. Leakage 5 µA at VCHRG = 5 V, VBAT = 4.3 V."
      },
      {
        "number": "8",
        "name": "TS",
        "type": "input",
        "description": "Battery temperature sense input. Connect via a resistor divider (R1, R2) with an external NTC to VIN. Charging is allowed only when the TS voltage is between VTS_L (30 %·VIN, rising) and VTS_H (60 %·VIN, falling), with 30 mV hysteresis. Tie via equal R1/R2 (TS ≈ 50 %·VIN) if thermal protection is unused."
      },
      {
        "number": "9",
        "name": "GND",
        "type": "power_in",
        "description": "Ground / exposed thermal pad on the bottom of the ESOP-8 package. Must be soldered to the PCB ground plane for thermal dissipation (θJA ≈ 50 °C/W on 2S2P JEDEC PCB) and electrical return."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "lcsc": "C2935092",
      "digikey": false,
      "mouser": false
    },
    "distributor_check": {
      "checked_at": "2026-10-05T19:06:03Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "models_3d": [
      {
        "file": "lp7801tspf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "aa1f86df473b51d6fffa82d4ff5a0ca030b07835b04d46a38a7b8cb0f27e418e",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lp7801tspf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "b64d35857cc53fdf4445fc8829a2e50a6ab186815ca60c4a0e462a8aebf8eb03",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}