main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lp6239sof: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lp6239sof: viewers · Ray
lp6239sof-etched.fit.json lp6239sof: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lp6239sof-etched.glb lp6239sof: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lp6239sof-etched.step lp6239sof: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lp6239sof.glb Publish 0.1.0 · Ray
lp6239sof.kicad_mod Publish 0.1.0 · Ray
lp6239sof.kicad_sym Publish 0.1.0 · Ray
lp6239sof.lbr Publish 0.1.0 · Ray
lp6239sof.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
page.json lp6239sof: specified limits as data (metadata.characteristics, 34 rows from the datasheet) · Ray
README.md lp6239sof: specified limits as data (metadata.characteristics, 34 rows from the datasheet) · Ray

LP6239SOF

LOWPOWER · DC-DC Converters · SOP-8

LP6239SOF from LOWPOWER, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Input supply pin, 2.5V to 6V. Decouple with a 10 uF ceramic capacitor placed close to the pin.
2 GATE output External N-channel MOSFET gate drive output from the internal gate driver. Drives the switch of the boost converter power stage.
3 GND power_in Device ground reference for the controller and gate driver return current.
4 CS input Current sense input pin. Connects to the external sense resistor (typ. 10 mOhm) to set the current limit and slope compensation; OCP threshold is 170 mV.
5 FB input Regulator feedback input. Connect to an external resistor divider from VOUT to program the output voltage; internal reference is 1.215 V (typ).
6 COMP output Error amplifier compensation node. Connect an external RC network (typ. 10 kOhm + 2 nF) to GND to set the loop bandwidth and stability of the current-mode PWM control loop.
7 NC unconnected No internal connection. Leave floating or tie to GND per board layout preference.
8 EN input Chip enable control input. Logic high (>=1.5 V) enables the converter; logic low (<=0.7 V) shuts it down. Internal 150 kOhm pull-down to GND.

Key specifications

Parameter Value
Manufacturer LOWPOWER
Package SOP-8
Category PMIC
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • LP6239SOF

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Supply Voltage VIN 2.5 6 V 5
Feedback Voltage VFB 1.191 1.215 1.239 V 5
Maximum Duty Cycle DMAX 80 % 5
Shutdown Current IQ 0.1 1 uA 5
Sleep Current IQ 0.5 1 mA 5
Operation Current IQ 2 4 mA 5
VIN to GND -0.3 6.5 V 4
GATE, CS, FB, COMP, EN to GND -0.3 6.5 V 4
Operating Junction Temperature Range TJ -40 150 °C 4
Operation Ambient Temperature Range -40 85 °C 4
Storage Temperature Range -65 150 °C 4
Maximum Soldering Temperature 260 °C at leads, 10sec 4
Maximum Junction Temperature 150 °C 4
Thermal Resistance SOP-8 junction-to-ambient θJA 112 °C/W 4
Thermal Resistance SOP-8 junction-to-case θJC 39 °C/W 4
Input UVLO Threshold VUVLO(VTH) 1.9 V VIN Rising 5
UVLO Threshold Hysteresis VUVLO(HYS) 170 mV Falling Hysteresis 5
Soft Start Time 15 ms 5
Thermal Shutdown Threshold TSD 150 °C Temperature Rising 5
Thermal Shutdown Hysteresis ΔTSD 25 °C 5
EN Threshold Voltage Logic High VIH 1.5 V Logic High. 5
EN Threshold Voltage Logic Low VIL 0.7 V Logic Low 5
EN Pull Down Resistor RPull_Low 150 kΩ 5
Internal Oscillator Frequency FOSC 600 kHz 5
Voltage Gain of Error Amplifier AV 1500 V/V 5
Transconductance of EA Gm 100 uA/V 5
Gate rising time 40 uA CGate=500pF 5
Gate falling time 20 uA CGate=500pF 5
Over Current Protection Threshold VOCP 170 mV Threshold of OCP 5
Slope Compensation Current ISlope 40 uA 5
Under Voltage Protection VUVP 1 V 5
Fault Trigger Duration TFault 42 ms 5
SCP Threshold VSCP 0.5 V 5
Hiccup Timer 580 ms 5

CAD (KiCad official)

  • Symbol: LP6239SOF
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: lp6239sof-etched.step / lp6239sof-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lp6239sof.step / lp6239sof.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
lp6239sof.step 122 KB You want the bare part, or you mark your own boards.
lp6239sof-etched.step 2.2 MB You want the part with LP6239SOF already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 514 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: LOWPOWER datasheet (6 pp, sha256 fb93d2e0b4e262aa, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF