main
Ray
lp6238b6f: specified limits as data (metadata.characteristics, 22 rows from the datasheet)
5969076
LP6238B6F
LOWPOWER · DC-DC Converters · SOT-23-6
LP6238B6F from LOWPOWER, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | power_out | Switching node. Drain of the internal 2.6A N-channel power MOSFET; connect the boost inductor between VIN and this pin, and the Schottky rectifier from SW to VOUT. Rated up to 12V absolute max to GND. |
| 2 | GND | power_in | Device ground return. Must be tied to the system ground plane close to the input and output capacitors for low-noise operation. |
| 3 | FB | input | Regulation feedback input. Connect an external resistive divider from VOUT to FB; the internal loop regulates FB to the 0.6V (typ) reference. VOUT = (R1/R2 + 1) x 0.6V. Feedback input current 50nA typ. |
| 4 | EN | input | Regulator ON/OFF control input. Logic high (VEN > 1.4V) enables the converter; logic low (VEN < 0.4V) forces the LP6238 into low-current shutdown (<1uA typ). |
| 5 | VIN | power_in | Input power supply pin, 2.5V to 5.5V. Bypass to GND with a low-ESR ceramic capacitor (22uF typical) placed close to the pin. |
| 6 | NC | unconnected | No connect. Leave floating or tie to GND; not internally bonded to any active circuit. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LOWPOWER |
| Package | SOT-23-6 |
| Category | PMIC |
| Pins | 6 |
Ordering variants
Same part, different packaging or reel option.
LP6238B6F
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | 2.5 | 5.5 | V | 4 | |||
| Output Voltage Range | 2.5 | 9 | V | 4 | |||
| Feedback Voltage | 0.588 | 0.6 | 0.612 | V | 4 | ||
| Maximum Duty Cycle | 80 | 90 | 95 | % | 4 | ||
| EN Input Low Voltage | 0.4 | V | 4 | ||||
| EN Input High Voltage | 1.4 | V | 4 | ||||
| Supply Current(Shutdown) | 10 | uA | VEN=0V | 4 | |||
| Supply Current | 0.19 | mA | VFB=0.7V | 4 | |||
| Feedback Input Current | 50 | nA | VFB=1.2V | 4 | |||
| Switching Frequency | 1 | MHz | 4 | ||||
| Switch MOSFET Current Limit | 2.6 | A | 4 | ||||
| Low-side On Resistance | 180 | mΩ | 4 | ||||
| Input to GND | 6 | V | 3 | ||||
| SW Voltage to GND | 12 | V | 3 | ||||
| Other Pin Voltage to GND | 6 | V | 3 | ||||
| Maximum Junction Temperature | 150 | ℃ | 3 | ||||
| Operating Ambient Temperature Range (TA) | TA | -40 | 85 | ℃ | 3 | ||
| Maximum Soldering Temperature | 260 | ℃ | at leads, 10 sec | 3 | |||
| Maximum Power Dissipation | PD | 0.45 | W | TA=25℃ | 3 | ||
| Thermal Resistance (junction to ambient) | JA | 250 | ℃/W | 3 | |||
| ESD Susceptibility HBM | 2 | KV | HBM (Human Body Model) | 3 | |||
| ESD Susceptibility MM | 200 | V | MM (Machine Model) | 3 |
CAD (KiCad official)
- Symbol:
LP6238B6F - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
lp6238b6f-etched.step/lp6238b6f-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp6238b6f.step/lp6238b6f.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LOWPOWER datasheet (8 pp, sha256
a65206f5023a9610, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LP6238B6F
**LOWPOWER** · DC-DC Converters · SOT-23-6
LP6238B6F from LOWPOWER, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | power_out | Switching node. Drain of the internal 2.6A N-channel power MOSFET; connect the boost inductor between VIN and this pin, and the Schottky rectifier from SW to VOUT. Rated up to 12V absolute max to GND. |
| 2 | GND | power_in | Device ground return. Must be tied to the system ground plane close to the input and output capacitors for low-noise operation. |
| 3 | FB | input | Regulation feedback input. Connect an external resistive divider from VOUT to FB; the internal loop regulates FB to the 0.6V (typ) reference. VOUT = (R1/R2 + 1) x 0.6V. Feedback input current 50nA typ. |
| 4 | EN | input | Regulator ON/OFF control input. Logic high (VEN > 1.4V) enables the converter; logic low (VEN < 0.4V) forces the LP6238 into low-current shutdown (<1uA typ). |
| 5 | VIN | power_in | Input power supply pin, 2.5V to 5.5V. Bypass to GND with a low-ESR ceramic capacitor (22uF typical) placed close to the pin. |
| 6 | NC | unconnected | No connect. Leave floating or tie to GND; not internally bonded to any active circuit. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LOWPOWER |
| Package | SOT-23-6 |
| Category | PMIC |
| Pins | 6 |
## Ordering variants
Same part, different packaging or reel option.
- `LP6238B6F`
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | | 2.5 | | 5.5 | V | | 4 |
| Output Voltage Range | | 2.5 | | 9 | V | | 4 |
| Feedback Voltage | | 0.588 | 0.6 | 0.612 | V | | 4 |
| Maximum Duty Cycle | | 80 | 90 | 95 | % | | 4 |
| EN Input Low Voltage | | | | 0.4 | V | | 4 |
| EN Input High Voltage | | 1.4 | | | V | | 4 |
| Supply Current(Shutdown) | | | | 10 | uA | VEN=0V | 4 |
| Supply Current | | | 0.19 | | mA | VFB=0.7V | 4 |
| Feedback Input Current | | | 50 | | nA | VFB=1.2V | 4 |
| Switching Frequency | | | 1 | | MHz | | 4 |
| Switch MOSFET Current Limit | | | 2.6 | | A | | 4 |
| Low-side On Resistance | | | 180 | | mΩ | | 4 |
| Input to GND | | | | 6 | V | | 3 |
| SW Voltage to GND | | | | 12 | V | | 3 |
| Other Pin Voltage to GND | | | | 6 | V | | 3 |
| Maximum Junction Temperature | | | | 150 | ℃ | | 3 |
| Operating Ambient Temperature Range (TA) | TA | -40 | | 85 | ℃ | | 3 |
| Maximum Soldering Temperature | | | | 260 | ℃ | at leads, 10 sec | 3 |
| Maximum Power Dissipation | PD | | | 0.45 | W | TA=25℃ | 3 |
| Thermal Resistance (junction to ambient) | JA | | 250 | | ℃/W | | 3 |
| ESD Susceptibility HBM | | | | 2 | KV | HBM (Human Body Model) | 3 |
| ESD Susceptibility MM | | | | 200 | V | MM (Machine Model) | 3 |
## CAD (KiCad official)
- Symbol: `LP6238B6F`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `lp6238b6f-etched.step` / `lp6238b6f-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lp6238b6f.step` / `lp6238b6f.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [LOWPOWER datasheet](docs/lp6238b6f-datasheet.pdf) (8 pp, sha256 `a65206f5023a9610`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lp6238b6f-datasheet.pdf)