component
LP6236QVF
Public Made by Adomby adom
LOWPOWER DC-DC Converters, DFN-6-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
LP6236QVF
LOWPOWER · DC-DC Converters · DFN-6-EP(2x2)
LP6236QVF from LOWPOWER, in a DFN-6-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground. |
| 2 | VIN | power_in | Power supply pin; supply voltage range is 2.2V to 6V. |
| 3 | EN | input | Regulator ON/OFF control input; logic high (VEN>1.4V) turns on the regulator and logic low (VEN<0.4V) puts the device into low current shutdown mode. |
| 4 | FB | input | Regulation feedback input; connect to an external resistive voltage divider from the output to FB to set the output voltage (0.6V typical feedback voltage). |
| 5 | NC | unconnected | No connection. |
| 6 | SW | passive | Switching pin connecting to the inductor and output diode; SW voltage is rated up to 27V. |
| 7 | GND | power_in | Exposed pad shown as pin 7 in the TDFN-6 diagram, labelled GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LOWPOWER |
| Package | DFN-6-EP(2x2) |
| Category | Power Management ICs |
| Pins | 7 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | 2.2 | 6 | V | VIN=3.3V, VOUT=5V, CIN=10uF, COUT=22uF, L=4.7uH, R1=220K, R2=30K | 4 | ||
| Output Voltage Range | 2.5 | 25 | V | 4 | |||
| Supply Current (Shutdown) | 0.05 | 1 | uA | VEN=VOUT=0V, VSW=5V | 4 | ||
| Feedback Voltage | 0.588 | 0.6 | 0.612 | V | 4 | ||
| Maximum Duty Cycle | 80 | 90 | 95 | % | 4 | ||
| EN Input Low Voltage | 0.4 | V | 4 | ||||
| EN Input High Voltage | 1.4 | V | 4 | ||||
| High-side On Resistance | 220 | 300 | mΩ | VOUT=3.3V | 4 | ||
| Supply Current | 200 | uA | VEN=2V | 4 | |||
| Feedback Input Current | 50 | nA | VFB=0.6V | 4 | |||
| Switching Frequency | 800 | KHz | 4 | ||||
| Switch MOSFET Current Limit | 2 | A | 4 | ||||
| Input Voltage to GND | 6.5 | V | 3 | ||||
| SW Voltage to GND | 27 | V | 3 | ||||
| Other pin Voltage to GND | 6.5 | V | 3 | ||||
| Maximum Junction Temperature | 125 | ℃ | 3 | ||||
| Operating Ambient Temperature Range | TA | -40 | 85 | ℃ | 3 | ||
| Maximum Soldering Temperature | 260 | ℃ | at leads, 10 sec | 3 | |||
| Maximum Power Dissipation (TDFN-6) | PD | 0.8 | W | TA=25℃ | 3 | ||
| Thermal Resistance (TDFN-6) | θJA | 150 | ℃/W | TDFN-6 | 3 | ||
| ESD HBM | 2 | KV | Human Body Mode | 3 | |||
| ESD MM | 200 | V | Machine Mode | 3 |
CAD (KiCad official)
- Symbol:
LP6236QVF - Footprint:
Package_DFN_QFN:DFN-6-1EP_2x2mm_P0.65mm_EP1x1.6mm - 3D model: DFN-6-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
lp6236qvf-etched.step/lp6236qvf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp6236qvf.step/lp6236qvf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LOWPOWER datasheet (9 pp, sha256
ca1ffd8b02119bad, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LP6236QVF
**LOWPOWER** · DC-DC Converters · DFN-6-EP(2x2)
LP6236QVF from LOWPOWER, in a DFN-6-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground. |
| 2 | VIN | power_in | Power supply pin; supply voltage range is 2.2V to 6V. |
| 3 | EN | input | Regulator ON/OFF control input; logic high (VEN>1.4V) turns on the regulator and logic low (VEN<0.4V) puts the device into low current shutdown mode. |
| 4 | FB | input | Regulation feedback input; connect to an external resistive voltage divider from the output to FB to set the output voltage (0.6V typical feedback voltage). |
| 5 | NC | unconnected | No connection. |
| 6 | SW | passive | Switching pin connecting to the inductor and output diode; SW voltage is rated up to 27V. |
| 7 | GND | power_in | Exposed pad shown as pin 7 in the TDFN-6 diagram, labelled GND. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LOWPOWER |
| Package | DFN-6-EP(2x2) |
| Category | Power Management ICs |
| Pins | 7 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | | 2.2 | | 6 | V | VIN=3.3V, VOUT=5V, CIN=10uF, COUT=22uF, L=4.7uH, R1=220K, R2=30K | 4 |
| Output Voltage Range | | 2.5 | | 25 | V | | 4 |
| Supply Current (Shutdown) | | | 0.05 | 1 | uA | VEN=VOUT=0V, VSW=5V | 4 |
| Feedback Voltage | | 0.588 | 0.6 | 0.612 | V | | 4 |
| Maximum Duty Cycle | | 80 | 90 | 95 | % | | 4 |
| EN Input Low Voltage | | | | 0.4 | V | | 4 |
| EN Input High Voltage | | 1.4 | | | V | | 4 |
| High-side On Resistance | | | 220 | 300 | mΩ | VOUT=3.3V | 4 |
| Supply Current | | | 200 | | uA | VEN=2V | 4 |
| Feedback Input Current | | | 50 | | nA | VFB=0.6V | 4 |
| Switching Frequency | | | 800 | | KHz | | 4 |
| Switch MOSFET Current Limit | | | 2 | | A | | 4 |
| Input Voltage to GND | | | | 6.5 | V | | 3 |
| SW Voltage to GND | | | | 27 | V | | 3 |
| Other pin Voltage to GND | | | | 6.5 | V | | 3 |
| Maximum Junction Temperature | | | | 125 | ℃ | | 3 |
| Operating Ambient Temperature Range | TA | -40 | | 85 | ℃ | | 3 |
| Maximum Soldering Temperature | | | | 260 | ℃ | at leads, 10 sec | 3 |
| Maximum Power Dissipation (TDFN-6) | PD | | | 0.8 | W | TA=25℃ | 3 |
| Thermal Resistance (TDFN-6) | θJA | | 150 | | ℃/W | TDFN-6 | 3 |
| ESD HBM | | | | 2 | KV | Human Body Mode | 3 |
| ESD MM | | | | 200 | V | Machine Mode | 3 |
## CAD (KiCad official)
- Symbol: `LP6236QVF`
- Footprint: `Package_DFN_QFN:DFN-6-1EP_2x2mm_P0.65mm_EP1x1.6mm`
- 3D model: DFN-6-EP(2x2) (KiCad packages3D, STEP)
- 3D model files: `lp6236qvf-etched.step` / `lp6236qvf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lp6236qvf.step` / `lp6236qvf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [LOWPOWER datasheet](docs/lp6236qvf-datasheet.pdf) (9 pp, sha256 `ca1ffd8b02119bad`, retrieved 2026-10-23, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lp6236qvf-datasheet.pdf)