main
Ray
lp6225b6f: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
4501dcb
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154
{
"slug": "lp6225b6f",
"version": "0.1.0",
"type": "component",
"description": "LOWPOWER DC-DC Converters, SOT-23-6. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"pmic",
"lp6225b6f"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lp6225b6f.kicad_sym",
"lp6225b6f.kicad_mod",
"lp6225b6f.glb",
"lp6225b6f.step",
"lp6225b6f.lbr",
"docs/hero.png",
"docs/lp6225b6f-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"lp6225b6f-etched.step"
],
"visibility": {
"public": true
},
"author": {
"name": "Ray"
},
"component": {
"mpn": "LP6225B6F",
"manufacturer": "LOWPOWER",
"package": "SOT-23-6",
"pin_count": 6,
"category": "DC-DC Converters",
"parts": {
"symbol": "lp6225b6f.kicad_sym",
"footprint": "lp6225b6f.kicad_mod",
"model_3d": "lp6225b6f-etched.glb",
"model_3d_plain": "lp6225b6f.glb",
"model_3d_step": "lp6225b6f-etched.step",
"model_3d_step_plain": "lp6225b6f.step",
"lbr": "lp6225b6f.lbr"
},
"pins": [
{
"number": "1",
"name": "SW",
"type": "output",
"description": "Power switch output. SW is the drain of the internal low-side power MOSFET (RDS(on) ≈ 80 mΩ). Connect the boost inductor and the anode of the output rectifier Schottky diode to this pin. Absolute maximum SW voltage is -0.3 V to 25 V."
},
{
"number": "2",
"name": "GND",
"type": "power_in",
"description": "Device ground. Return for the internal low-side power MOSFET source, control logic, and reference. Should be tied to the system ground plane with a low-impedance path close to the input bypass capacitor."
},
{
"number": "3",
"name": "FB",
"type": "input",
"description": "Output voltage feedback input. Connect an external resistor divider from VOUT to FB (with the lower leg to GND) to program the output voltage: VOUT = (R1/R2 + 1) × VREF, where VREF is 0.6 V typical (0.588 V min, 0.612 V max). Keep R2 ≤ 200 kΩ for noise immunity. Absolute maximum FB voltage is -0.3 V to 9 V."
},
{
"number": "4",
"name": "EN",
"type": "input",
"description": "Regulator ON/OFF logic control input. A logic-high level (VEN > 1.4 V) enables the converter; a logic-low level (VEN < 0.4 V) forces the LP6225 into low-current shutdown mode (ISD ≈ 0.1 µA at VEN = 0 V). Absolute maximum EN voltage is -0.3 V to 18 V. Do not float."
},
{
"number": "5",
"name": "IN",
"type": "power_in",
"description": "Input power supply. Operating input voltage range is 2.5 V to 15 V (absolute maximum -0.3 V to 18 V). Place a low-ESR ceramic bypass capacitor (≈ 20 µF recommended) as close as possible to this pin and GND."
},
{
"number": "6",
"name": "NC",
"type": "unconnected",
"description": "No internal connection. Leave floating or tie to a non-critical net. Do not use as an electrical tie point."
}
],
"provenance": {
"rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"distributor_links": {
"lcsc": "C47345730",
"digikey": false,
"mouser": false
},
"distributor_check": {
"checked_at": "2026-10-05T19:05:58Z",
"source": "Component Ocean /api/assign-pns + lcsc_map",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"models_3d": [
{
"file": "lp6225b6f.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.8,
2.9,
1.55
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "c9fe686b4d1b56927a41fa84a9bc1efb61d8a45a123a3db43bcaa05c2891d635",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lp6225b6f-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.8,
2.9,
1.55
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "a3bfe45fa308e8627dd8e7db7940a4e2ee2fdbc4af9d40a2ec9e485d2a0a0b3f",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}